High formability of glass plus fcc-Al phases in rapidly solidified Al-based multicomponent alloy
Source abstract
Abstract
A multicomponent Al84Y9Ni4Co1.5Fe0.5Pd1 alloy was found to keep a mixed glassy + Al phases in the relatively large ribbon thickness range up to about 200 μm for the melt-spun ribbon and in the diameter range up to about 1100 μm for the wedge-shaped cone rod prepared by injection copper mold casting. The glassy phase in the Al-based alloy has a unique crystallization process of glass transition, followed by supercooled liquid region, fcc-Al + glass, and then Al + Al3Y + Al9 (Co, Fe)2 + unknown phase. It is also noticed that the primary precipitation phase from supercooled liquid is composed of an Al phase instead of coexistent Al + compound phases, being different from the crystallization mode from supercooled liquid for ordinary Al-based glassy alloys. In addition, it is noticed that the mixed Al and glassy phases are extended in a wide heating temperature range of 588–703 K, which is favorable for the development of high-strength nanostructure Al-based bulk alloys obtained by warm extrusion of mixed Al + amorphous phases. The Vickers hardness is about 415 for the glassy phase and increases significantly to about 580 for the mixed Al and glassy phases. The knowledge of forming Al + glassy phases with high hardness in the wide solidification and annealing conditions through high stability up to complete crystallization for the multicomponent alloy is promising for future development of a high-strength Al-based bulk alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Davis JR (1993) Aluminum and aluminum alloys, ASM international
2. Malek P, Janecek M, Smola B, Bartuska P, Plestil J (2000) Structure and properties of rapidly solidified Al–Zr–Ti alloys. J Mater Sci 35:2625–263310.1023/A:1004739718504 ↗
3. Inoue A, Kimura H (2000) High-strength aluminum alloys containing nanoquasicrystalline particles. Mat Sci Eng 286:1–1010.1016/S0921-5093(00)00656-0 ↗
4. Zhu M, Yang GC, YaoLJ Cheng SL, Zhou YH (2010) Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route. J Mater Sci 45:3727–373410.1007/s10853-010-4421-8 ↗
5. Taketani K, Uoya A, Ohtera K, Uehara T, Higashi K, Inoue A (1994) Readily superplastic forging at high strain rates in an aluminium-based alloy produced from nanocrystalline powders. J Mater Sci 29:6513–651710.1007/BF00354013 ↗
6. Tokuoka T, Kaji T, Nishioka T, Ikegaya A (2006) Development of high-strength, heat-resistant aluminum alloy made by powder forging process. SEI Technical Review 61:70–76
7. Inoue A, Yamamoto M, Kimura HM, Masumoto T (1987) Ductile aluminium-base amorphous alloys with two separate phases. J Mater Sci Lett 6:194–19610.1007/BF01728983 ↗
8. He Y, Poon SJ, Shiflet GJ (1988) Synthesis and properties of metallic glasses that contain aluminum. Science 241:1640–164210.1126/science.241.4873.1640 ↗
9. Inoue A (1998) Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems. Prog Mater Sci 43:365–52010.1016/S0079-6425(98)00005-X ↗
10. Scudino S, Surreddi KB, Sager S, Sakaliyskaet M, Kim JS, Loser W, Eckert J (2008) Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites. J Mater Sci 43:4518–452610.1007/s10853-008-2647-5 ↗
11. Nieh TG, Wadsworth J (1991) High-strain-rate superplasticity in aluminum matrix composites. Mat Sci Eng 147:129–14210.1016/0921-5093(91)90839-F ↗
12. Inoue A, Kimura H, Amiya K (2002) Developments of aluminum- and magnesium-based nanophase high-strength alloys by use of melt quenching-induced metastable phase. Mater Trans 43:2006–201610.2320/matertrans.43.2006 ↗
13. Gordillo MA, Cernatescu I, Aindow TT, Watson TJ, Aindow M (2014) Phase stability in a powder-processed Al–Mn–Ce alloy. J Mater Sci 49:3742–375410.1007/s10853-014-8086-6 ↗
14. Calin M, Grahl H, Adam M, Eckert J, Schultzl L (2004) Synthesis and thermal stability of ball-milled and melt-quenched amorphous and nanostructured Al–Ni–Nd–Co alloys. J Mater Sci 39:5295–529810.1023/B:JMSC.0000039232.67075.ed ↗
15. Inoue A, Sobu S, Louzguine DV, Kimura H, Sasamori K (2004) Ultrahigh strength Al-based amorphous alloys containing Sc. J Mater Res 19:1539–154310.1557/JMR.2004.0206 ↗
16. Inoue A, Horio Y, Kim Y, Masumoto T (1992) Elevated-temperature strength of an Al88Ni9Ce2Fe1 amorphous alloy containing nanoscale fcc-Al particles. Mater Trans, JIM 33:669–67410.2320/matertrans1989.33.669 ↗
17. Zhuo L, Pang S, Wang H, Zhang T (2009) Ductile bulk aluminum-based alloy with good glass-forming ability and high strength. Chin Phys Lett 26:06640210.1088/0256-307X/26/11/117701 ↗
18. Wu NC, Zuo L, Wang JQ, Ma E (2016) Designing aluminum-rich bulk metallic glasses via electronic-structure-guided microalloying. Acta Mater 108:143–15110.1016/j.actamat.2016.02.012 ↗
19. Inoue A, Matsumoto N, Masumoto T (1990) Al–Ni–Y–Co amorphous alloys with high mechanical strengths, wide supercooled liquid region and large glass-forming capacity. Mater Trans, JIM 31:493–50010.2320/matertrans1989.31.493 ↗
20. Takeuchi A, Inoue A (2005) Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans 46:2817–282910.2320/matertrans.46.2817 ↗
21. Louzguine DV, Inoue A (2002) Influence of a supercooled liquid on crystallization behaviour of Al–Y–Ni–Co metallic glass. Mater Lett 54:75–8010.1016/S0167-577X(01)00542-0 ↗
22. Bassim N, Kiminami CS, Kaufman MJ, Oliveira MF, Perdigao MNRV, Botta Filho WJ (2001) Crystallization behavior of amorphous Al84Y9Ni5Co2 alloy. Mater Sci Eng 304:332–33710.1016/S0921-5093(00)01532-X ↗
23. Nitsche H, Sommer F, Mittemeijer EJ (2005) The Al nano-crystallization process in amorphous Al85Y8Ni5Co2. J Non-Cryst Solids 351:3760–377110.1016/j.jnoncrysol.2005.08.040 ↗
24. Louzguine D, Inoue A (2002) Crystallization behaviour of Al-based metallic glasses below and above the glass-transition temperature. J Non-Cryst Solids 311:281–29310.1016/S0022-3093(02)01375-3 ↗
25. Inoue A, Ohtera K, Tsai A-P, Masumoto T (1988) Aluminum-based amorphous alloys with tensile strength above 980 MPa (100 kg/mm2). Jpn J Appl Phys 27:L47910.1143/JJAP.27.L479 ↗
26. Louzguine DV, Inoue A (2001) Full or particle replacement of Y by rare-earth and some other elements in the Al85Y8Ni5Co2 alloy. J Light Met 1:105–10910.1016/S1471-5317(01)00003-7 ↗
27. Kim HY, Inoue A, Masumoto T (1991) Ultrahigh mechanical strengths of Al88Y2Ni10−xMx (M = Mn, Fe or Co) amorphous alloys containing nanoscale fcc-Al particles. Mater Trans, JIM 32:599–60810.2320/matertrans1989.32.599 ↗
28. Inoue A, Nakazato K, Kawamura Y, Tsai A, Masumoto T (1994) Effect of Cu or Ag on the formation of coexistent nanoscale Al particles in Al–Ni–M–Ce (M = Cu or Ag) amorphous alloys. Mater Trans, JIM 35:95–10210.2320/matertrans1989.35.95 ↗
29. Inoue A (2000) Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater 48:279–30610.1016/S1359-6454(99)00300-6 ↗
30. Xie YQ, Peng K, Liu XB (2004) Influences of xTi/xAl on atomic states, lattice constants and potential-energy planes of ordered FCC TiAl-type alloys. Phys B 344:5–2010.1016/j.physb.2003.06.002 ↗
31. Inoue A, Ohtera K, Masumoto T (1988) New amorphous Al–Y, Al–La and Al–Ce alloys prepared by melt spinning. Jpn J Appl Phys 27:736–73910.1143/JJAP.27.L736 ↗
32. Louzguine DV, Inoue A (2002) Investigation of structure and properties of the Al–Y–Ni–Co–Cu metallic glasses. J Mater Res 17:1014–101810.1557/JMR.2002.0149 ↗
33. Yang H, Dong P, Wang J, Li Y (2007) Glass formability and structural stability of Al-based alloy systems. Mat Sci Eng A-Struct 449:273–27610.1016/j.msea.2006.02.368 ↗
34. Wang JQ, Liu YH, Imhoff S, Chen N, Louzguine-Luzgin DV, Takeuchi A, Chen MW, Kato H, Perepezko JH, Inoue A (2012) Enhance the thermal stability and glass forming ability of Al-based metallic glass by Ca minor-alloying. Intermetallics 29:35–4010.1016/j.intermet.2012.04.009 ↗
35. Hirata A, Hirotsu Y, Amiya K, Nishiyama N, Inoue A (2009) Fe23B6-type quasicrystal-like structures without icosahedral atomic arrangement in an Fe-based metallic glass. Phys Rev B 80:14020110.1103/PhysRevB.80.140201 ↗
36. Saida J, Yamada R, Wakeda M (2013) Recovery of less relaxed state in Zr–Al–Ni–Cu bulk metallic glass annealed above glass transition temperature. Appl Phys Lett 103:22191010.1063/1.4835076 ↗
37. Hirata A, Hirotsu Y, Amiya K, Inoue A (2010) Quasicrystal-like structure and its crystalline approximant in an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass. J Alloy Compd 504:186–18910.1016/j.jallcom.2010.03.222 ↗
38. Louzguine DV, Bazlov AI, Ketov SV, Greer AL, Inoue A (2015) Crystal growth limitation as a critical factor for formation of Fe-based metallic glasses. Acta Mater 82:396–40210.1016/j.actamat.2014.09.025 ↗
39. Bassim N, Kiminami CS, Kaufman MJ (2000) Phases formed during crystallization of amorphous Al84Y9Ni5Co2 alloy. J Non-Cryst Solids 273:271–27610.1016/S0022-3093(00)00135-6 ↗
40. Inoue A, Kong FL, Zhu SL, Liu CT (2015) Development and applications of highly functional Al-based materials by use of metastable phases. Mater Res 18:1414–142510.1590/1516-1439.058815 ↗