journal article·2015-10

Importance of thermal gradient in the bitumen bees genesis

Manuel Mercé, Hassan Saadaoui, François Dole, Lionel Buisson, Ahmed Bentaleb, David Ruggi, Véronique Schmitt, Rénal Backov

Journal of Materials Science· Volume 50· Issue 20
Publisher page

Abstract

Bitumen can be regarded as a complex colloidal suspension. Indeed, the heaviest molecules in bitumen, the asphaltenes, are known to self-associate to form solid particles suspended in a fluid called maltenes. Bitumen is also composed of a crystallizable fraction that partitions between asphaltenes and maltenes. This complex colloidal system exhibits peculiar patterns at their surface called “bees.” By varying the bitumen formulation and also tuning process parameters such as the temperature cooling rate, we demonstrate the role of the various components: asphaltenes, maltenes, and the crystallizable fraction on the bee existence and we evidence that the bee formation results from a complex coupling between different physico-chemical phenomena such as phase separation, crystallization, and buckling. We then propose a mechanism of bee genesis based on the thermal properties of the various fractions and especially on the heat capacity of both asphaltenes and maltenes. We demonstrate that a thermal gradient in the sample is required for the formation of bees and put into evidence the importance of kinetic aspects. We also discuss the bitumen general bulk properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Petroleum Processing and Analysis · Enhanced Oil Recovery Techniques · Hydrocarbon exploration and reservoir analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Connan J (1999) Use and trade of bitumen in antiquity and prehistory: molecular archaeology reveals secrets of past civilizations. Philos Trans R Soc Lond Ser B 354:33–5010.1098/rstb.1999.0358 ↗
2. Lay MG (1992) Ways of the world a history of the world’s roads and of the vehicles that used them. Rutgers University Press, New Brunswick
3. Lesueur D (2009) The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. Adv Colloid Interface Sci 145:42–8210.1016/j.cis.2008.08.011 ↗
4. EN 12597 (2000) Bitumen and bituminous binders
5. Speight JG (2014) The chemistry and technology of petroleum, 5th edn10.1201/b16559 ↗
6. Corbett LW (1969) Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization. Anal Chem 41:576–57910.1021/ac60273a004 ↗
7. Mullins OC, Sabbah H, Eyssautier J, Pomerantz AE, Barré L, Andrews AB, Ruiz-Morales Y, Mostowfi F, McFarlane R, Goual L, Lepkowicz R, Cooper T, Orbulescu J, Leblanc RM, Edwards J, Zare RN (2012) Advances in asphaltene science and the Yen-Mullins model. Energy Fuels 26:3986–400310.1021/ef300185p ↗
8. Mullins OC (2010) The modified yen model†. Energy Fuels 24:2179–220710.1021/ef900975e ↗
9. Eyssautier J, Hénaut I, Levitz P, Espinat D, Barré L (2012) Organization of asphaltenes in a vacuum residue: a small-angle X-ray scattering (SAXS)—viscosity approach at high temperatures. Energy Fuels 26:2696–270410.1021/ef201412j ↗
10. Eyssautier J (2012) Characterization and modelling of petroleum residue in hydroprocessing conditions, PhD Thesis, Polytechnique
11. Eyssautier J, Levitz P, Espinat D, Jestin J, Gummel JRM, Grillo I, Barré LC (2011) Insight into asphaltene nanoaggregate structure inferred by small angle neutron and X-ray scattering. J Phys Chem B 115:6827–683710.1021/jp111468d ↗
12. Luo P, Gu Y (2007) Effects of asphaltene content on the heavy oil viscosity at different temperatures. Fuel 86:1069–107810.1016/j.fuel.2006.10.017 ↗
13. Qin Q, Farrar MJ, Pauli AT, Adams JJ (2013) Morphology, thermal analysis and rheology of Sasobit modified warm mix asphalt binders. Fuel 115:416–42510.1016/j.fuel.2013.07.033 ↗
14. Loeber L, Sutton O, Morel J, Valleton JM, Muller G (1996) New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. J Microsc 182:32–3910.1046/j.1365-2818.1996.134416.x ↗
15. Fischer H, Stadler H, Erina N (2013) Quantitative temperature-depending mapping of mechanical properties of bitumen at the nanoscale using the AFM operated with PeakForce TappingTM mode. J Microsc 250:210–21710.1111/jmi.12036 ↗
16. Lyne Å, Wallqvist V, Rutland M, Claesson P, Birgisson B (2013) Surface wrinkling: the phenomenon causing bees in bitumen. J Mater Sci 48:6970–6976. doi: 10.1007/s10853-013-7505-410.1007/s10853-013-7505-4 ↗
17. Masson JF, Leblond V, Margeson J (2006) Bitumen morphologies by phase-detection atomic force microscopy. J Microsc 221:17–2910.1111/j.1365-2818.2006.01540.x ↗
18. Jäger A, Lackner R, Eisenmenger-Sittner C, Blab R (2004) Identification of microstructural components of bitumen by means of atomic force microscopy (AFM). PAMM 4:400–40110.1002/pamm.200410181 ↗
19. Masson JF, Leblond V, Margeson J, Bundalo-Perc S (2007) Low-temperature bitumen stiffness and viscous paraffinic nano- and micro-domains by cryogenic AFM and PDM. J Microsc 227:191–20210.1111/j.1365-2818.2007.01796.x ↗
20. Schmets A, Kringos N, Pauli T, Redelius P, Scarpas T (2010) On the existence of wax-induced phase separation in bitumen. Int J Pavement Eng 11:555–56310.1080/10298436.2010.488730 ↗
21. Lyne ÅL, Wallqvist V, Birgisson B (2013) Adhesive surface characteristics of bitumen binders investigated by atomic force microscopy. Fuel 113:248–25610.1016/j.fuel.2013.05.042 ↗
22. Sourty ED, Tamminga AY, Michels MAJ, Vellinga WP, Meijer HEH (2011) The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopy approach. J Microsc 241:132–14610.1111/j.1365-2818.2010.03409.x ↗
23. Acevedo S, Cordero TJM, Carrier H, Bouyssiere B, Lobinski R (2009) Trapping of paraffin and other compounds by asphaltenes detected by laser desorption ionization-time of flight mass spectrometry (LDI-TOF MS): role of A1 and A2 asphaltene fractions in this trapping. Energy Fuels 23:842–84810.1021/ef8007745 ↗
24. Kriz P, Andersen SI (2005) Effect of asphaltenes on crude oil wax crystallization. Energy Fuels 19:948–95310.1021/ef049819e ↗
25. Pimpinelli A, Villain J (1998) Physics of crystal growth. Cambridge University Press, Cambridge10.1017/CBO9780511622526 ↗
26. Lu X, Langton M, Olofsson P, Redelius P (2005) Wax morphology in bitumen. J Mater Sci 40:1893–1900. doi: 10.1007/s10853-005-1208-410.1007/s10853-005-1208-4 ↗
27. Fischer HR, Dillingh EC (2014) On the investigation of the bulk microstructure of bitumen—introducing two new techniques. Fuel 118:365–36810.1016/j.fuel.2013.11.008 ↗
28. Turner TF, Branthaver JF (1997) DSC studies of asphalts and asphalt components. Dekker, pp 59–101
29. Masson JF, Polomark GM, Collins P (2002) Time-dependent microstructure of bitumen and its fractions by modulated differential scanning calorimetry. Energy Fuels 16:470–47610.1021/ef010233r ↗
30. Masson JF, Polomark GM (2001) Bitumen microstructure by modulated differential scanning calorimetry. Thermochim Acta 374:105–11410.1016/S0040-6031(01)00478-6 ↗
31. Depardieu M, Janot R, Sanchez C, Deleuze H, Gervais C, Birot M, Morcrette M, Backov R (2014) Nano-spots induced break of the chemical inertness of boron: a new route toward reversible hydrogen storage applications. J Mater Chem A 2:7694–770110.1039/c4ta00736k ↗