Synthesis of a lightweight Ti–10Al–5Mg (wt.%) alloy by mechanical alloying followed by compaction and sintering
Source abstract
Abstract
A lightweight Ti–10Al–5Mg (wt.%) alloy was synthesized by mechanical alloying followed by cold compaction and sintering. A metastable hcp α-Ti(Al,Mg) solid solution was obtained after 5 h of milling. The c/a ratio of the hcp structure was found to increase with milling time. The particle size distribution of the mixture becomes broader and the dp50 value decreases as the milling time increases. The structure of the 900 and 1,100 °C sintered samples consist of an α-Ti(Al) solid solution matrix with α2-Ti3Al and MgO precipitates. Values of 11 and 188 GPa were obtained for the Hardness and Young’s modulus of 1,100 °C sintered sample, respectively, confirming the strength improvement of the Ti-based alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Froes FH, Yau T-L, Weidinger HG (1996) In: Matucha KH (ed) Materials science and technology, vol. 8, Structure and properties of nonferrous alloys, Wiley-VCH, p 399
2. Froes FH (2001) In: Wessel J.K. (ed) Handbook of advanced materials. MacGraw-Hill, New York, p 271
3. Froes FH, Mashl SJ, Moxson VS, Hebeisen JC, Duz VA (2004) JOM 56(11):4610.1007/s11837-004-0252-x ↗
4. Dias L, Coelho C, Trindade B, Froes FH (2004) Mater Sci Eng A 364:27310.1016/j.msea.2003.08.029 ↗
5. Simões F, Trindade B (2005) Mater Sci Eng A 397:25710.1016/j.msea.2005.02.014 ↗
6. Trindade B, Caetano M, Duarte N (2006) Mat Sci Forum 514–516:60910.4028/www.scientific.net/MSF.514-516.609 ↗
7. Zhou JB, Rao KP (2004) J Alloys Compd 384(1–2):12510.1016/j.jallcom.2004.03.127 ↗
8. Murray JL (1992) ASM handbook: alloy phase diagrams, vol. 3. ASM, Metals Park, Ohio, p 2560
9. Murray JL (1992) ASM handbook: alloy phase diagrams, vol. 3. ASM, Metals Park, Ohio, p 226
10. Murray JL (1992) ASM handbook: alloy phase diagrams, vol. 3, ASM, Metals Park, Ohio, p 3370
11. Antunes JM, Cavaleiro A, Menezes LF, Simões MI, Fernandes JV (2002) Surf Coat Technol 149:2710.1016/S0257-8972(01)01413-X ↗
12. Benjamin JS (1976) Sci Amer 234(5):4010.1038/scientificamerican0576-40 ↗
13. Williamson G, Hall WH (1953) Acta Met 1:2210.1016/0001-6160(53)90006-6 ↗
14. Dias L, Coelho C, Trindade B, Froes FH (2002) Key Eng Mater 230–232:28310.4028/www.scientific.net/KEM.230-232.283 ↗
15. Hida M, Asai K, Takemoto Y, Sakakibara A (1997) Mater Sci Forum 235:53
16. Zhou E, Suryanarayana C, Froes FH (1995) Mater Lett 23:2710.1016/0167-577X(95)00009-7 ↗
17. Wardclose M, Lu G, Partridge PG (1994) Mater Sci Eng A 1–2:24710.1016/0921-5093(94)90422-7 ↗
18. Sujata M, Bhargava S, Sangal S (1996) ISIJ Intl 36(3):25510.2355/isijinternational.36.255 ↗