journal article·2016-02

Novel multiwalled carbon nanotube grafted with polyethylene glycol-block-polystyrene nanohybrids: ATRP synthesis and detection of benzene vapor

Yan-Ling Luo, Rui-Xue Bai, Feng Xu, Ya-Shao Chen, Hua Li, Si-Si Dai, Wen-Bo Ma

Journal of Materials Science· Volume 51· Issue 3
Publisher page

Abstract

Novel multiwalled carbon nanotube graft polyethylene glycol-block-polystyrene copolymer nanohybrids (MWCNTs-g-PEG-b-PS) were prepared via atom transfer radical polymerization using carboxylated MWCNTs (MWCNTs–COOH) as a conductive carrier. The chemical structure and the compositions of graft copolymer nanohybrids were characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetry, and gas chromatography, and the morphologies and dispersion behavior were observed by ultraviolet visible spectrophotometer, scanning electron microscope, and transmission electron microscope etc. The MWCNTs-g-PEG-b-PS-grafted copolymer nanohybrids were fabricated into conductive composite thin film sensors to investigate their responsiveness to benzene vapor. The influence of the molecular weights or compositional ratios of PEG and PS blocks on the conductivity of the conducting polymer nanohybrids and responsibility towards benzene vapor was investigated. The conducting polymer nanohybrid film sensors were demonstrated to possess the characteristics of quick response and good restorability, repeatability, and stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Polydiacetylene-based materials and applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Pang H, Xu L, Yan DX, Li ZM (2014) Conductive polymer composites with segregated structures. Prog Polym Sci 39:1908–193310.1016/j.progpolymsci.2014.07.007 ↗
2. Ma LF, Bao RY, Huang SL, Liu ZY, Yang W, Xie BH, Yang MB (2013) Electrical properties and morphology of carbon black filled PP/EPDM blends: effect of selective distribution of fillers induced by dynamic vulcanization. J Mater Sci 48:4942–4951. doi: 10.1007/s10853-013-7275-z10.1007/s10853-013-7275-z ↗
3. Deng H, Lin L, Ji MZ, Zhang SM, Yang MB, Fu Q (2014) Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials. Prog Polym Sci 39:627–65510.1016/j.progpolymsci.2013.07.007 ↗
4. Zribi K, Feller JF, Elleuch K, Bourmaud A, Elleuch B (2006) Conductive polymer composites obtained from recycled poly(carbonate) and rubber blends for heating and sensing applications. Polym Adv Technol 17:727–73110.1002/pat.776 ↗
5. Kumar B, Castro M, Fell JF (2012) Tailoring the chemo-resistive response of self-assembled polysaccharide-CNT sensors by chain conformation at tunnel junctions. Carbon 50:3627–363410.1016/j.carbon.2012.03.034 ↗
6. Villmow T, Pegel S, John A, Rentenberger R, Pötschke P (2011) Liquid sensing: smart polymer/CNT composites. Mater Today 14:340–34510.1016/S1369-7021(11)70164-X ↗
7. Tang CY, Long GC, Hu X, Wong KW, Lau WM, Fan MK, Mei J, Xu T, Wang B, Hui D (2015) Conductive polymer nanocomposites with hierarchical multi-scale-structure via self-assembling carbon-nanotubes on grapheme on polymer-microspheres. Nanoscale 6:7877–7888. doi: 10.1039/C3NR06056J10.1039/C3NR06056J ↗
8. Tiusanen J, Vlasveld D, Vuorinen J (2012) Review on the effects of injection moulding parameters on the electrical resistivity of carbon nanotube filled polymer parts. Compos Sci Technol 72:1741–175210.1016/j.compscitech.2012.07.009 ↗
9. Mechrez G, Suckeveriene RY, Zelikman E, Rosen J, Ariel-Sternberg N, Cohen R, Narkis M, Segal E (2012) Highly-tunable polymer/carbon nanotubes systems: preserving dispersion architecture in solid composites via rapid microfiltration. ACS Macro Lett 1:848–85210.1021/mz300145a ↗
10. Zhang MQ, Rong MZ, Chen SG (2007) Conductive polymer composites serving as gas sensors. Key Eng Mater 334–335:561–56410.4028/www.scientific.net/KEM.334-335.561 ↗
11. Sartore L, Sassi A, Barbaglio M (2011) Properties of multifunctional polymers-carbon black composite vapor detectors. Chem Chem Technol 5:67–7410.23939/chcht05.01.067 ↗
12. Mangu R, Rajaputra S, Singh VP (2011) MWCNT-polymer composites as highly sensitive and selective room temperature gas sensors. Nanotechnology 22:215502–21550810.1088/0957-4484/22/21/215502 ↗
13. Smith Martyn T (2010) Advances in understanding benzene health effects and susceptibility. Ann Rev Public Health 31:133–14810.1146/annurev.publhealth.012809.103646 ↗
14. Huff J (2007) Benzene-induced cancers: abridged history and occupational health impact. Int J Occup Environ Health 13:213–22110.1179/oeh.2007.13.2.213 ↗
15. Rana SV, Verma Y (2005) Biochemical toxicity of benzene. J Environ Biol 26:157–168
16. Villmow T, Kretzschmar B, Potschke P (2010) Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites. Compos Sci Technol 70:2045–205510.1016/j.compscitech.2010.07.021 ↗
17. Spitalsky Z, Tasis D, Papagelis K, Galiotis C (2010) Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties. Prog Polym Sci 35:357–40110.1016/j.progpolymsci.2009.09.003 ↗
18. Wang HC, Li Y, Yang MJ (2007) Sensors for organic vapor detection based on composites of carbon nanotubes functionalized with polymers. Sens Actuators B 124:360–36710.1016/j.snb.2006.12.047 ↗
19. Bilalis P, Katsigiannopoulos D, Avgeropoulos A, Sakellariou G (2014) Non-covalent functionalization of carbon nanotubes with polymers. RSC Adv 4:2911–293410.1039/C3RA44906H ↗
20. Braunecker WA, Matyjaszewski K (2007) Controlled/living radical polymerization: features, developments, and perspectives. Prog Polym Sci 32:93–14610.1016/j.progpolymsci.2006.11.002 ↗
21. Shen J, Champagne MF, Gendron R, Guo S (2012) The development of conductive carbon nanotube networks in polypropylene-based composites during simultaneous biaxial stretching. Eur Polym J 48:930–93910.1016/j.eurpolymj.2012.03.005 ↗
22. Sahoo NG, Rana S, Cho JW, Li L, Chan SH (2010) Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci 35:837–86710.1016/j.progpolymsci.2010.03.002 ↗
23. Shrivastava NK, Khatua BB (2011) Development of electrical conductivity with minimum possible percolation threshold in multi-wall carbon nanotube/polystyrene composites. Carbon 49:4571–457910.1016/j.carbon.2011.06.070 ↗
24. Prashantha K, Soulestin J, Lacrampe MF, Claes M, Dupin G, Krawczak P (2008) Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: improvement of dispersion and mechanical properties through PP-g-MA addition. Express Polym Lett 2:735–74510.3144/expresspolymlett.2008.87 ↗
25. Pötschke P, Krause B, Buschhorn ST, Köpke U, Müller MT, Villmow T, Schulte K (2013) Improvement of carbon nanotube dispersion in thermoplastic composites using a three roll mill at elevated temperatures. Compos Sci Technol 74:78–8410.1016/j.compscitech.2012.10.010 ↗
26. Majeed S, Filiz V, Shishatskiy S, Wind J, Abetz C, Abetz V (2012) Pyrene-POSS nanohybrid as a dispersant for carbon nanotubes in solvents of various polarities: its synthesis and application in the preparation of a composite membrane. Nanoscale Res Lett 7:296–30610.1186/1556-276X-7-296 ↗
27. Crescenzo AD, Ettorre V, Fontana A (2014) Non-covalent and reversible functionalization of carbon nanotubes. Beilstein J Nanotechnol 5:1675–169010.3762/bjnano.5.178 ↗
28. Li JR, Xu JR, Zhang MQ, Rong MZ (2003) Electrical response to organic vapor of conductive composites from amorphous polymer/carbon black prepared by polymerization filling. Macromol Mater Eng 288:103–10710.1002/mame.200390002 ↗
29. Lala NL, Thavasi V, Ramakrishna S (2009) Preparation of surface adsorbed and impregnated multiwalled carbon nanotube/nylon-6 nanofiber composites and investigation of their gas sensing ability. Sensors 9:86–10110.3390/s90100086 ↗
30. Luo YL, Wang SH, Li ZQ (2008) Characterization, microstructure, and gas sensitive response behavior of PEG/lithium salt polymer electrolyte films. J Mater Sci 43:174–184. doi: 10.1007/s10853-007-2125-510.1007/s10853-007-2125-5 ↗
31. Xu JW, Xu F, Luo YL (2015) Core cross-linked H-type poly(methacrylic acid)-block-hydroxyl terminated polybutadiene-block-poly(methacrylic acid) four-armed star block copolymer micelles for intercellular drug release. J Bioact Comp Polym 30:349–36510.1177/0883911515578871 ↗
32. Gao C, Vo CD, Jin YZ, Li W, Armes SP (2005) Multihydroxy polymer-functionalized carbon nanotubes: synthesis, derivatization, and metal loading. Macromolecules 38:8634–864810.1021/ma050823e ↗
33. Sarafraz-Yazdi A, Amiri A, Rounaghi G, Hosseini HE (2011) A novel solid-phase microextraction using coated fiber based sol–gel technique using poly(ethylene glycol) grafted multi-walled carbon nanotubes for determination of benzene, toluene, ethylbenzene and o-xylene in water samples with gas chromatography-flam ionization detector. J Chromatogr A 1218:5757–576410.1016/j.chroma.2011.06.099 ↗
34. Wen Y, Wu H, Chen S, Lu Y, Shen H, Jia N (2009) Direct electrochemistry and electrocatalysis of hemoglobin immobilized in poly(ethylene glycol) grafted multi-walled carbon nanotubes. Electrochim Acta 54:7078–708410.1016/j.electacta.2009.07.038 ↗
35. Kong H, Gao C, Yan D (2004) Controlled functionalization of multiwalled carbon nanotubes by in situ atom transfer radical polymerization. J Am Chem Soc 126:412–41310.1021/ja0380493 ↗
36. Wu HX, Tong R, Qiu XQ, Yang HF, Lin YH, Cai RF, Qian SX (2007) Functionalization of multiwalled carbon nanotubes with polystyrene under atom transfer radical polymerization conditions. Carbon 45:152–15910.1016/j.carbon.2006.07.011 ↗
37. Ma XT, Zhan HJ (2008) Study of DMF catalytic air epoxidation of styrene under mild conditions. China Surfactant Deterg Cosmet 38:319–321
38. Wei C, Dai L, Roy A, Tolle TB (2006) Multifunctional chemical vapor sensors of aligned carbon nanotube and polymer composites. J Am Chem Soc 128:1412–141310.1021/ja0570335 ↗
39. Zhang T, Mubeen S, Myung NV, Deshusses MA (2008) Recent progress in carbon nanotube-based gas sensors. Nanotechnology 19:332001–33201410.1088/0957-4484/19/33/332001 ↗
40. Kar P, Choudhury A (2013) Carboxylic acid functionalized multi-walled carbon nanotube doped polyaniline for chloroform sensors. Sens Actuators B 183:25–3310.1016/j.snb.2013.03.093 ↗
41. Shang S, Zeng W, Tao X (2012) Investigation on the electrical response behaviors of multiwalled carbon nanotube/polyurethane composite in organic solvent vapors. Sens Actuators B 166–167:330–33710.1016/j.snb.2011.12.113 ↗