journal article·2014-04

Sintering behaviour and ac conductivity of dense Ce0.8Gd0.2O1.9 solid electrolyte prepared employing single-step and two-step sintering process

Zihua Wang, Girish M. Kale, Xue Tang

Journal of Materials Science· Volume 49· Issue 8
Publisher page

Abstract

High density sub-microcrystalline Ce0.8Gd0.2O1.9 (CGO) ceramics using an unconventional two-step sintering (TSS) process have been successfully obtained. Impedance spectroscopy has been used to measure conductivity of CGO samples between 283 and 422 °C. The CGO ceramic samples sintered using the TSS process have been found to deliver superior physical and electrical properties compared to those processed employing the single-step sintering process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Doshi R, Richards VL, Charter JD, Wang XP, Krumpelt M (1999) Development of solid-oxide fuel cells that operate at 500 degrees C. J Electrochem Soc 146:1273–127810.1149/1.1391758 ↗
2. Steele BCH (2000) Materials for IT-SOFC stacks 35 years R&D: the inevitability of gradualness. Solid State Ionics 134:3–2010.1016/S0167-2738(00)00709-8 ↗
3. Steele BCH (2000) Kinetic parameters influencing the performance of IT-SOFC composite electrodes. Solid State Ionics 135:445–45010.1016/S0167-2738(00)00393-3 ↗
4. Leng YJ, Chan SH, Jiang SP, Khor KA (2004) Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction. Solid State Ionics 170:9–1510.1016/j.ssi.2004.02.026 ↗
5. Sun C, Li H, Chen LQ (2012) Nanostructured ceria-based materials: synthesis, properties, and applications. Energy Environ Sci 5:8475–850510.1039/c2ee22310d ↗
6. Zhen QA, Kale GM, He WM, Liu JQ (2007) Microwave plasma sintered nanocrystalline Bi2O3–HfO2–Y2O3 composite solid electrolyte. Chem Mater 19:203–21010.1021/cm061197i ↗
7. Lee HY, Kale GM (2008) Hydrothermal synthesis and characterization of nano-TiO2. Int J Appl Ceram Technol 5:657–66510.1111/j.1744-7402.2008.02248.x ↗
8. Wang XT, Kale GM (2008) Microwave sintering of YSZ electrolyte materials for SOFC. Key Eng Mater 268:238–24010.4028/www.scientific.net/KEM.368-372.238 ↗
9. Zhen QA, Kale GM, Shi G, Li R, He WM, Liu JQ (2005) Processing of dense nanocrystalline Bi2O3–Y2O3 solid electrolyte. Solid State Ionics 176:2727–273310.1016/j.ssi.2005.07.004 ↗
10. Chen IW, Wang XH (2002) Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 404:168–17110.1038/35004548 ↗
11. Wang ZH, Comyn TP, Ghadiri M, Kale GM (2011) Maltose and Pectin assisted sol-gel production of Ce0.8Gd0.2O1.9 solid electrolyte nanopowders for solid oxide fuel cells. J Mater Chem 21:16494–1649910.1039/c1jm12344k ↗
12. Bellon O, Sammes NM, Staniforth J (1998) Mechanical properties and electrochemical characterisation of extruded doped cerium oxide for use as an electrolyte for solid oxide fuel cells. J Power Sources 75:116–12110.1016/S0378-7753(98)00104-9 ↗
13. Zhang TS, Ma J, Kong LB, Hing P, Leng YJ, Chan SH, Kilner JA (2003) Preparation and electrical properties of dense submicron-grained Ce0.8Gd0.2O2−δ ceramics. J Mater Sci Lett 22:1809–181110.1023/B:JMSL.0000005427.09933.9e ↗
14. Dikmen S, Shuk P, Greenblatt M, Gocmez H (2002) Hydrothermal synthesis and properties of Ce1−x Gd x O2−δ solid solutions. Solid State Sci 4:585–59010.1016/S1293-2558(02)01301-8 ↗
15. Wang ZH, Kale GM, Ghadiri M (2012) Synthesis and characterization of Ce x Gd1−x O2−δ nanopowders employing an alginate mediated ion-exchange process. Chem Eng J 198–199:149–15310.1016/j.cej.2012.05.063 ↗