journal article·2014-10

Application of high-pressure torsion to Al-6 %Cu-0.4 %Zr alloy for ultrafine-grain refinement and superplasticity

Ali Alhamidi, Zenji Horita

Journal of Materials Science· Volume 49· Issue 19
Publisher page

Abstract

An Al-6 %Cu-0.4 %Zr alloy was processed by high-pressure torsion to produce an ultrafine-grained structure with a grain size of ~200 nm at the steady-state level where the hardness remains constant with straining. Tensile testing showed that a maximum elongation of ~530 % was attained at 673 K with an initial strain rate of 1 × 10−3 s−1. Evaluation of the strain-rate sensitivity and the activation energy for the deformation confirmed that grain boundary sliding through grain boundary diffusion is the rate-controlling process for the superplastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Barnes AJ (1994) Superplastic forming of aluminum alloys. Langdon TG (ed.) Superplastic in advanced materials (ICSAM-1994). Mater Sci Forum 170–172:701–71410.4028/www.scientific.net/MSF.170-172.701 ↗
2. Langdon TG (2009) Seventy-five years of superplasticity: historic developments and new opportunities. J Mater Sci 44:5998–601010.1007/s10853-009-3780-5 ↗
3. Sakai G, Horita Z, Langdon TG (2005) Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion. Mater Sci Eng, A 393:344–35110.1016/j.msea.2004.11.007 ↗
4. Lee S, Furukawa M, Horita Z, Langdon TG (2003) Developing a superplastic forming capability in a commercial aluminum alloy without scandium or zirconium additions. Mater Sci Eng A342:294–30110.1016/S0921-5093(02)00319-2 ↗
5. Ota S, Akamatsu H, Neishi K, Furukawa M, Horita Z, Langdon TG (2002) Low-temperature superplasticity in aluminium alloys processed by equal-channel angular pressing. Mater Trans 43:2364–236910.2320/matertrans.43.2364 ↗
6. Dobatkin SV, Bastarache EN, Sakai G, Fujita T, Horita Z, Langdon TG (2005) Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion. Mater Sci Eng A408:141–14610.1016/j.msea.2005.07.023 ↗
7. Horita Z, Langdon TG (2008) Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion. Scripta Mater 58:1029–103210.1016/j.scriptamat.2008.01.043 ↗
8. Xu C, Dobatkin SV, Horita Z, Langdon TG (2009) Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion. Mater Sci Eng A50:170–17510.1016/j.msea.2008.09.049 ↗
9. Yang X, Miura H, Sakai T (2002) Continuous dynamic recrystallization in a superplastic 7075 aluminum alloys. Mater Trans 43:2400–240710.2320/matertrans.43.2400 ↗
10. Sherby OD, Wadsworth J (1989) Superplasticity recent-advances and future directions. Progress in Mater Sci 33:169–22110.1016/0079-6425(89)90004-2 ↗
11. Kawasaki M, Langdon TG (2007) Principles of superplasticity in ultrafine-grained materials. J Mater Sci 42:1782–179610.1007/s10853-006-0954-2 ↗
12. Katsas S, Dashwood R, Grimes R, Jackson M, Todda G, Henein H (2007) Dynamic recrystallisation and superplasticity in pure aluminium with zirconium addition. Mater Sci Eng A444:291–29710.1016/j.msea.2006.08.096 ↗
13. Kaibyshev R, Kazyhanov V (1999) Texture and microstructure evolution during superplasticity of the metal matrix composite PM 2014 Al-20% Al2O3. Texture Microstruct 32:83–9910.1155/TSM.32.83 ↗
14. Kovacs-Csetenyi E, Torma T, Turmezey T, Chinh NQ, Juhasz A, Kovacs I (1992) Superplasticity of AlMgSi alloys. J Mater Sci 27:6141–614510.1007/BF01133763 ↗
15. Eddahbi M, McNelley TR, Ruano OA (2001) The evolution of grain boundary character during superplastic deformation of an Al-6 Pct Cu-0.4 Pct Zr Alloy. Metall Mater Trans A32A:1093–110210.1007/s11661-001-0120-z ↗
16. Figueiredo RB, Kawasaki M, Xu C, Langdon TG (2008) Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing. Mater Sci Eng, A 493:104–11010.1016/j.msea.2007.06.090 ↗
17. Horita Z, Furukawa M, Nemoto M, Barnes AJ, Langdon TG (2000) Superplastic forming at high strain rates after severe plastic deformation. Acta Mater 48:3633–364010.1016/S1359-6454(00)00182-8 ↗
18. Neishi K, Horita Z, Langdon TG (2003) Achieving superplasticity in ultrafine-grained copper: influence of Zn and Zr additions. Mater Sci Eng A352:129–13510.1016/S0921-5093(02)00868-7 ↗
19. Figueiredo RB, Langdon TG (2009) Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing. Scripta Mater 61:84–8710.1016/j.scriptamat.2009.03.012 ↗
20. Garcia-Infanta JM, Zhilyaev AP, Sharafutdinov A, Ruano OA, Carreno FJ (2009) An evidence of high strain rate superplasticity at intermediate homologous temperatures in an Al–Zn–Mg–Cu alloy processed by high-pressure torsion. Alloys Compd 473:163–16610.1016/j.jallcom.2008.06.006 ↗
21. Edalati K, Toh S, Watanabe M, Horita Z (2012) In situ production of bulk intermetallic-based nanocomposites and nanostructured intermetallics by high-pressure torsion. Scripta Mater 66:386–38910.1016/j.scriptamat.2011.11.039 ↗
22. Zhilyaev AP, Langdon TG (2008) Using high-pressure torsion for metal processing: fundamentals and applications. Progress in Mater Sci 53:893–97910.1016/j.pmatsci.2008.03.002 ↗
23. Rentenberger C, Waitz T, Karnthaler HP (2004) HRTEM analysis of nanostructured alloys processed by severe plastic deformation. Scripta Mater 51:789–79410.1016/j.scriptamat.2004.05.008 ↗
24. Edalati K, Horita Z (2010) Application of high-pressure torsion for consolidation of ceramic powders. Scripta Mater 63:174–17710.1016/j.scriptamat.2010.03.048 ↗
25. Edalati K, Toh S, Ikoma Y, Horita Z (2011) Plastic deformation and allotropic phase transformations in zirconia ceramics during high-pressure torsion. Scripta Mater 65:974–97710.1016/j.scriptamat.2011.08.024 ↗
26. Hasegawa H, Komura S, Utsunomiya A, Horita Z, Furukawa M, Nemoto M, Langdon TG (1999) Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions. Mater Sci Eng A265:188–19610.1016/S0921-5093(98)01136-8 ↗
27. Wadsworth J, Henshall CA, Pelton AR, Ward B Mater (1985) Superplastic properties of an AI–Cu–Li–Zr alloy. J Sci Lett 4:674–67810.1007/BF00726958 ↗
28. Malek P, Turba K, Cieslar M, Drbohlav I, Kruml T (2007) Structure development during superplastic deformation of an Al–Mg–Sc–Zr alloy. Mater Sci Eng, A 462:95–9910.1016/j.msea.2006.01.171 ↗
29. Furukawa M, Berbon PB, Horita Z, Nemoto M, Tsenev NK, Valiev RZ, Langdon TG (1998) Age hardening and the potential for superplasticity in a fine-grained Al–Mg–Li–Zr Alloy. Metall Mater Trans A 29A:169–17710.1007/s11661-998-0170-6 ↗
30. Valiev RZ, Krasilnikov NA, Tsenev NK (1991) Plastic deformation of alloys with submicron-grained structure. Mater Sci Eng, A 137:35–4010.1016/0921-5093(91)90316-F ↗
31. Padmanabhan KA, Hirsch J, Lucke K (1991) Superplasticity-dislocation creep interactions in a coarse grained Al–Cu–Zr alloy. J Mater Sci 26:5309–531710.1007/BF01143226 ↗
32. Malek P, Cieslar M, Jezek J (1999) Superplasticity in a powder metallurgy Al–Cu–Zr Alloy. Phys Stat Sol 175:467–48010.1002/(SICI)1521-396X(199910)175:2<467::AID-PSSA467>3.0.CO;2-3 ↗
33. Nieh TG, Wadsworth J, Sherby OD (1997) Superplasticity in metals and ceramics. Cambridge University Press, UK10.1017/CBO9780511525230 ↗
34. Valiev RZ, Salimonenko DA, Tsenev NK, Berbon PB, Langdon TG (1997) Observation of high strain rate superplasticity in commercial aluminum alloys with ultrafine grain sizes. Scripta Mater 37:1945–195010.1016/S1359-6462(97)00387-4 ↗
35. Xu C, Horita Z, Langdon TG (2007) The evolution of homogeneity in processing by high-pressure torsion. Acta Mater 55:203–21210.1016/j.actamat.2006.07.029 ↗
36. Edalati K, Fujioka T, Horita Z (2008) Microstructure and mechanical properties of pure Cu processed by high-pressure torsion. Mater Sci Eng, A 497:168–17310.1016/j.msea.2008.06.039 ↗
37. Higashi K (1998) Advances and applications in high strain rate superplasticity. Met Mater Int 4:498–50210.1007/BF03187816 ↗
38. Langdon TG (1994) A unified approach to grain boundary sliding in creep and superplasticity. Acta Metal Mater 42:2437–244310.1016/0956-7151(94)90322-0 ↗
39. Mohamed FA (2011) Micrograin superplasticity: characteristics and utilization. Mater 4:1194–1223
40. Juhasz A, Chinh NQ, Tasnadi P, Kovacs I, Turmezey T (1987) Superplasticity of aluminium alloys grain-refined by zirconium. J Mater Sci 22:137–14310.1007/BF01160562 ↗
41. Mehrer H (1990) Numerical data and functional relationship in science and technology, diffusion in solid metals and alloys, vol. 26. Springer, Berlin10.1007/b37801 ↗
42. Bricknell RH, Bentley AP (1979) The activation energy for superplastic flow in Al-6Cu-0.4Zr. J Mater Sci 14:2547–255410.1007/BF00610621 ↗