journal article·2013-05

Nanocomposites of poly(ε-caprolactone) doped with titanium species

A. V. Machado, S. Amorim, G. Botelho, I. C. Neves, A. M. Fonseca

Journal of Materials Science· Volume 48· Issue 9
Publisher page

Abstract

Organic–inorganic hybrid nanocomposites were prepared via in situ sol–gel process. The organic phase is a biodegradable polymer, poly(e-caprolactone) (PCL), while the tetrabutyl titanate (TBT, Ti(OBu)4) was used as inorganic precursor. Synthesis parameters like acidity medium and precursor amount were investigated in order to assess their influence on hybrid properties. The obtained nanocomposites were characterised by thermal analysis, spectroscopic techniques, transmission electronic microscopy (TEM) and X-ray diffraction to gather information on the structure of the nanocomposites. Mechanical properties and biodegradability were also evaluated. A reaction mechanism based on Fourier transform infrared spectroscopy and NMR results was proposed using methyl acetate as model compound. TEM micrographs of the nanocomposites show a fine good nanoparticles dispersion. Acidic conditions and 10 wt% of precursor lead to a nanocomposite with higher mechanical properties and biodegradability than PCL.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Wu CS (2004) J Appl Polym Sci 92:174910.1002/app.20135 ↗
2. Liao HT, Wu CS (2004) J Polym Sci B 42:427210.1002/polb.20293 ↗
3. Siuzdak DA, Start PR, Mauritz KA (2000) J Appl Polym Sci 77:283210.1002/1097-4628(20000923)77:13<2832::AID-APP5>3.0.CO;2-K ↗
4. Judeinstein P, Sanchez C (1996) J Mater Chem 6:51110.1039/JM9960600511 ↗
5. Catauro M, Raucci MG, Marco D, Ambrosio L (2006) J Biomed Mater Res B 2(77A):34010.1002/jbm.a.30617 ↗
6. Boettcher SW, Bartl MH, Hu JG, Stucky GD (2005) J Am Chem Soc 127:972110.1021/ja050753r ↗
7. Li R, Nie K, Shen X, Wang S (2007) Mater Lett 61:136810.1016/j.matlet.2006.07.032 ↗
8. Brinker CJ, Scherer GW (1990) Sol–gel science: the physics and chemistry of sol–gel processing. Academic Press Limited, New York, p 42
9. Mazzocchetti L, Scandola M, Pollicino A (2008) Polymer 49:521510.1016/j.polymer.2008.09.029 ↗
10. Moura I, Machado AV, Duarte FM, Nogueira R (2011) J Appl Polym Sci 119:333810.1002/app.32966 ↗
11. Barlier V, Legaré VB, Boiteux G, Davenas J, Leonard D (2008) Appl Surf Sci 254:540810.1016/j.apsusc.2008.02.076 ↗
12. Piszczek P, Grodzicki A, Richert M, Wojtczak A (2004) Inorg Chim Acta 357:276910.1016/j.ica.2004.02.022 ↗
13. Caruso RA, Antonietti M, Giersig M, Hentze H-P (2001) Chem Mater 13:111410.1021/cm001222z ↗
14. Perrin FX, Nguyen V, Vernet JL (2003) J Sol-Gel Sci Technol 28:20510.1023/A:1026081100860 ↗
15. Lahav M, Kharitonov AB, Willner I (2001) Chem Eur J 7:399210.1002/1521-3765(20010917)7:18<3992::AID-CHEM3992>3.0.CO;2-G ↗
16. Zhang Z, Zuo F, Feng P (2010) J Mater Chem 20:220610.1039/b921157h ↗
17. Chiang PC, Whang W (2003) Polymer 44:224910.1016/S0032-3861(03)00086-7 ↗
18. Georgiev DG, Baird RD, Newaz G, Auner G, Witte R, Herfurth H (2004) Appl Surf Sci 236:7110.1016/j.apsusc.2004.03.261 ↗
19. Liaw WC, Chen KP (2007) Eur Polym J 43:226510.1016/j.eurpolymj.2007.01.015 ↗
20. Tang X, Li Y, Chen J, Xu Y, Shen W (2007) Microporous Mesoporous Mater 103:25010.1016/j.micromeso.2007.02.008 ↗
21. Casaletto MP, Lisi L, Mattogno G, Patrono P, Ruoppolo G (2004) Appl Catal A 267:15710.1016/j.apcata.2004.02.039 ↗
22. Moulder JF, Stickle WF, Sobol PE, Bomben KD (1995) In: Chastain J, King RC Jr (eds) Handbook of X-ray photoelectron spectroscopy. Eden Prairie, New York
23. Arillo MA, López ML, Pico C, Veiga ML, Jiménez-López A, Rodríguez-Castellón E (2001) J Alloy Compd 317–318:16010.1016/S0925-8388(00)01339-6 ↗