journal article·2013-12

ZrB2 nanoparticle induced nano-LPSO-grain and nano-LPSO-layer reinforced ultra-high strength Mg–RE alloy

Muralidharan Paramsothy, Manoj Gupta

Journal of Materials Science· Volume 48· Issue 24
Publisher page

Abstract

ZrB2 nanoparticles were used to modify a selected solidification processed Mg–RE alloy to give it ultrahigh strength (tensile yield strength >400 MPa). This approach did not involve time consuming and therefore cost incurring stages such as (1) ingot solutionizing and quenching prior to hot extrusion as well as (2) thermal aging beyond 24 h after hot extrusion. Rather, the ZrB2 nanoparticle induced finer LPSO phase (nano-LPSO-layer) formation due to nano-surface effects and the consequent nucleating effects of the fibrous LPSO ends during hot extrusion resulted in the formation of nanograins. Alternatively, free zirconium from ZrB2 nanoparticles reacting with the magnesium matrix may have had a significant nanoscale grain refining effect on the alloy. During the 24 h period of lower temperature (200 °C) thermal aging in this study, the LPSO phase formed in nanograins containing sufficient dissolved Gd, Y, and Zn, this being nano-LPSO-grain formation which “auto-locked” the nanoscale grain size during thermal aging due to the thermal stability of the high melting point rare earth containing LPSO phase. Compared to the surrounding alloy matrix, the nano-LPSO-grain cluster with random grain striation orientation was more robust. This was confirmed by the observation of predominantly non-basal or 〈c+a〉 type dislocations requiring higher CRSS around as well as within the room temperature tensile deformed nano-LPSO-grains. The LPSO phase generally constricted the flow of dislocations during deformation. The nano-LPSO-layer also acted as finely divided nanoscale reinforcement for the alloy matrix, including nanoscale strengthening of selected micrograin boundaries by bridging. The higher robustness of the nano-LPSO-grain cluster (and nano-LPSO-layer), good stress transfer characteristics across the nano-LPSO-grain boundary (and nano-LPSO-layer–alloy matrix interface), and nanoscale bridging across selected micrograin boundaries by nano-LPSO-layers contributed to the ultra–high strength characteristic (tensile yield strength >400 MPa) of the selected Mg–RE alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Avedesian MM, Baker H (1999) ASM specialty handbook: magnesium and magnesium alloys. ASM International, Ohio
2. Inoue A, Kawamura Y, Matsushita M, Hayashi K, Koike J (2001) J Mater Res 16:189410.1557/JMR.2001.0260 ↗
3. Abe E, Kawamura Y, Hayashi K, Inoue A (2002) Acta Mater 50:384510.1016/S1359-6454(02)00191-X ↗
4. Itoi T, Seimiya T, Kawamura Y, Hirohashi M (2004) Scripta Mater 51:10710.1016/j.scriptamat.2004.04.003 ↗
5. Li DM, Bakker A (1997) Acta Mater 45(6):240710.1016/S1359-6454(96)00347-3 ↗
6. Suryanarayana C, Froes FM (1993) Adv Mater 5(2):9610.1002/adma.19930050205 ↗
7. Zheng L, Liu C, Wan Y, Yang P, Shu X (2011) J Alloys Compd 509:883210.1016/j.jallcom.2011.06.090 ↗
8. Gupta M, Lai MO, Lim SC (1997) J Alloys Compd 260:25010.1016/S0925-8388(97)00156-4 ↗
9. Tham LM, Gupta M, Cheng L (1999) Mater Sci Technol 15:113910.1179/026708399101505185 ↗
10. Xu C, Zheng MY, Wu K, Wang ED, Fan GH, Xu SW, Kamado S, Liu XD, Wang GJ, Lv XY, Li MJ, Liu YT (2013) Mater Sci Eng A 559:23210.1016/j.msea.2012.08.089 ↗
11. Xu C, Xu SW, Zheng MY, Wu K, Wang ED, Kamado S, Wang GJ, Lv XY (2012) J Alloys Compd 524:4610.1016/j.jallcom.2012.02.050 ↗
12. Wang J, Song P, Zhou X, Huang X, Pan F (2012) Mater Sci Eng A 556:6810.1016/j.msea.2012.06.059 ↗
13. De Cicco M, Konishi H, Cao G, Choi HS, Turng L-S, Perepezko JH, Kou S, Lakes R, Li X (2009) Metall Mater Trans A 40A:303810.1007/s11661-009-0013-0 ↗
14. Paramsothy M, Chan J, Kwok R, Gupta M (2011) Comp Part A 42:18010.1016/j.compositesa.2010.11.001 ↗
15. Hull D, Bacon DJ (2002) Introduction to dislocations, 4th edn. Butterworth-Heinemann, Oxford