Gas phase hydrogenation reaction using a ‘metal nanoparticle–polymer’ composite catalyst
Source abstract
Abstract
A facile synthesis route is described here for the preparation of a poly (anthranilic acid)-palladium nanoparticle composite material by polymerization of anthranilic acid (AA) monomer using palladium acetate (PA) as the oxidant. It was found that oxidative polymerization of AA leads to the formation of poly-AA (PAA), while the reduction of PA results in the formation of palladium nanoparticles with an average size of ~2 nm. The palladium nanoparticles were uniformly dispersed and highly stabilized within the macromolecular matrix resulting in a uniform metal–polymer composite material. The resultant composite material was characterized by means of different techniques, such as IR and Raman spectroscopy, which yielded information about the chemical structure of polymer, whereas electron microscopy images provided information concerning the morphology of the composite material and the distribution of the metal particles in the composite material. The composite material was tested as a catalyst for ethylene hydrogenation reaction and showed a catalytic activity at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Covalent Organic Framework Applications · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Gangopadhyay R, De A (2000) Chem Mater 12:60810.1021/cm990537f ↗
2. Selvan ST, Spatz JP, Klok HA, Möller M (1998) Adv Mater 10:13210.1002/(SICI)1521-4095(199801)10:2<132::AID-ADMA132>3.0.CO;2-Y ↗
3. Lee J, Sundar VC, Heine JR, Bawendi MG, Jensen KF (2000) Adv Mater 12:110210.1002/1521-4095(200008)12:15<1102::AID-ADMA1102>3.0.CO;2-J ↗
4. Corbierre MK, Cameron NS, Sutton M, Mochrie SGJ, Lurio LB, Rühm A, Lennox RB (2001) J Am Chem Soc 123:1041110.1021/ja0166287 ↗
5. Mallick K, Witcomb MJ, Scurrell MS (2007) Phys Status Solidi (RRL) 1:R110.1002/pssr.200600028 ↗
6. Dai X, Tan Y, Xu J (2002) Langmuir 18:901010.1021/la025926u ↗
7. Kinyanjui JM, Hatchett DW, Smith JA, Josowicz M (2004) Chem Mater 6:339010.1021/cm049478i ↗
8. Vijaya Kumar R, Mastai Y, Diamant Y, Gedanken A (2001) J Mater Chem 11:120910.1039/b005769j ↗
9. O’Mullane AP, Dale SE, Macpherson JV, Unwin PR (2004) Chem Commun 160610.1039/b404636f ↗
10. Hasik M, Wenda E, Bernasik A, Kowalski K, Sobczak JW, Sobczak E, Bielańska E (2003) Polymer 44:780910.1016/j.polymer.2003.10.036 ↗
11. Deschamps A, Lagier JP, Fievert F, Aeiyach S, Lacaze PC (1992) J Mater Chem 2:121310.1039/jm9920201213 ↗
12. Mallick K, Witcomb MJ, Dinsmore A, Scurrell MS (2005) Macromol Rapid Commun 26:23210.1002/marc.200400513 ↗
13. Mallick K, Witcomb MJ, Scurrell MS (2006) Eur Polym J 42:67010.1016/j.eurpolymj.2005.09.020 ↗
14. Mallick K, Witcomb MJ, Dinsmore A, Scurrell MS (2006) J Mater Sci 41:1733. doi:https://doi.org/10.1007/s10853-006-3950-710.1007/s10853-006-3950-7 ↗
15. Mallick K, Witcomb MJ, Scurrell MS (2006) Gold Bull 39:13610.1007/BF03215550 ↗
16. Panshin BI, Perov BV, Fedorenko AG (1971) Mech Comp Mater 7:159
17. Kazim S, Ali V, Zulfequar M, Haq MM, Husain M (2007) Curr Appl Phys 7:6810.1016/j.cap.2005.11.072 ↗