journal article·2013-10

Vibration-dependent morphology and crystal structure of isotactic polypropylene

Zhong-wu Wang, Juan Hu, Fang-zheng An, Jia-wei Gong, Xue-qin Gao, Cong Deng, Kai-zhi Shen

Journal of Materials Science· Volume 48· Issue 20
Publisher page

Abstract

A small homemade device was used to study the influence of mechanical vibration on the crystal structure and morphology of isotactic polypropylene (iPP) under different melting temperatures, vibration times, vibration frequencies, and cooling rates. The crystallite size, crystal structure, and crystallinity of iPP under or without vibration treatment were investigated by means of differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and polarized microscopy observation (PLM). The crystallization of iPP varied with the length of vibration time, vibration frequency, cooling rate, and melt temperature. Compared with the data of conventional samples measured by DSC, vibration could increase the crystallinity of iPP, make melting peak of α-crystal move toward higher temperature and make that of β-crystal shift to lower temperature. Meanwhile, WAXD measurements showed that the vibration could reduce the content of β-crystal evidently, particularly at the lower vibration frequency, lower cooling rate, and higher melting temperature. Furthermore, PLM measurements showed that the vibration made the spherulite size smaller.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Gao XQ, Deng C, Xu J, Li ZM, Zhang J, Shen KZ (2010) Polym Bull 65:5910.1007/s00289-010-0272-3 ↗
2. Lu Y, Peng H, Shen KZ, Yan Z (2011) Polym Bull 1(66):14710.1007/s00289-010-0317-7 ↗
3. Zhang J, Zhu J, Lei YW, Zeng T, Shen KZ, Fu Q (2008) Polym Bull 59:85510.1007/s00289-007-0831-4 ↗
4. Kaiyuan C, Nanqiao Z, Bin L, Shengping W (2009) Polym Int 2(58):11710.1002/pi.2500 ↗
5. Busico V, Cipullo R (2001) Prog Polym Sci 26(3):44310.1016/S0079-6700(00)00046-0 ↗
6. Yamamoto Y, Inoue Y, Onai T, Doshu C, Takahashi H, Uehara H (2007) Macromolecules 40:274510.1021/ma062784s ↗
7. De Rosa C, Auriemma F (2006) J Am Chem Soc 128(34):1102410.1021/ja063464r ↗
8. Norton DR, Keller A (1985) Polymer 26(5):70410.1016/0032-3861(85)90108-9 ↗
9. Turner-Jones A, Aizlewood J, Beckett D (1964) Macromol Chem Phys 75(1):13410.1002/macp.1964.020750113 ↗
10. Ellis G, Gomez MA, Marco C (2005) J Macromol Sci B 43(1):19110.1081/MB-120027758 ↗
11. Byelov D, Panine P, Remerie K, Biemond E, Alfonso GC (2008) Polymer 49(13–14):307610.1016/j.polymer.2008.04.051 ↗
12. Chen YH, Zhong GJ, Wang Y, Li ZM, Li LB (2009) Macromolecules 42:434310.1021/ma900411f ↗
13. Varga J (2002) J Macromol Sci B 41(4–6):112110.1081/MB-120013089 ↗
14. Grein C, Plummer CJG, Kausch HH (2002) Polymer 43(11):327910.1016/S0032-3861(02)00135-0 ↗
15. ShangGuan YG, Tong LF, Peng M, Zheng Q (2004) Chem Res Chin U 20(5):660
16. Zhang J, Shen KZ, Na S, Fu Q (2004) J Polym Sci B 42:238510.1002/polb.20110 ↗
17. Kalay G, Zhong ZP, Allan P, Bevis MJ (1996) Polymer 37(11):207710.1016/0032-3861(96)85852-6 ↗
18. Zheng Q, ShangGuan YG, Tong LF, Peng M (2004) J Appl Polym Sci 94(5):218710.1002/app.21166 ↗
19. Turner-Jones A, Cobbold AJ (1968) J Polym Sci B 6(8):53910.1002/pol.1968.110060802 ↗
20. Cho K, Saheb DN, Choi J (2002) Polymer 43(4):140710.1016/S0032-3861(01)00729-7 ↗
21. Gradys A, Sajkiewicz P, Minakov AA, Adamovsky S, Schick C (2005) Mater Sci Eng A 413–414(15):44210.1016/j.msea.2005.08.167 ↗