journal article·2014-07

Determination of thermodynamic interactions of poly(l-lactide) and biphasic calcium phosphate/poly(l-lactide) composite by inverse gas chromatography at infinite dilution

Aleksandra B. Nastasović, Nenad L. Ignjatović, Dragan P. Uskoković, Dana D. Marković, Bojana M. Ekmeščić, Danijela D. Maksin, Antonije E. Onjia

Journal of Materials Science· Volume 49· Issue 14
Publisher page

Abstract

Inverse gas chromatography at infinite dilution was applied to determine the thermodynamic interactions of poly(l-lactide) (PLLA) and the composite of biphasic calcium phosphate and PLLA (BCP/PLLA). The specific retention volumes, V0g , of 11 organic compounds of different chemical nature and polarity (non-polar, donor or acceptor) were determined in the temperature range of 308–378 K for PLLA and 308–398 K for BCP/PLLA. The weight fraction activity coefficients of test sorbates, Ω∞1 , and the Flory–Huggins interaction parameters, χ∞12 , were estimated and discussed in terms of interactions of the sorbates with PLLA and BCP/PLLA. Also, the partial molar free energy, ΔG∞1 , the partial molar heat of mixing, ΔH∞1 , the sorption molar free energy, ΔGS1 , the sorption enthalpy, ΔHS1 , and the sorption entropy, ΔSS1 , were analyzed. A different chromatographic behavior of the two investigated samples, PLLA and BCP/PLLA, was observed. The values of Ω∞1 indicated n-alkanes, diethyl ether, tetrahydrofurane (THF), cyclohexane, benzene, dioxane (except for 338 K), and ethyl acetate (EtAc) (except for 338 K) as non-solvents, and chloroform (CHCl3) as good solvent (except for 378 K) for PLLA. For BCP/PLLA, CHCl3, EtAc (for 378 K), dioxane (except for 378 K), and THF were indicated as good solvents.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption, diffusion, and thermodynamic properties of materials · biodegradable polymer synthesis and properties · Chemical Thermodynamics and Molecular Structure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Roeder RK, Converse GL, Kane RJ, Yue W (2008) Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes. JOM 60:38–4510.1007/s11837-008-0030-2 ↗
2. Zhou H, Lawrence JG, Bhaduri SB (2012) Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: a review. Acta Biomater 8:1999–201610.1016/j.actbio.2012.01.031 ↗
3. Ignjatović N, Plavšić M, Miljković M, Živković LJ, Uskoković D (1999) Microstructural characteristic of Ca-hydroxyapatite/poly-l-lactide based composites. J Microsc 196:243–24810.1046/j.1365-2818.1999.00623.x ↗
4. Nazhat SN, Kellomäki M, Törmälä P, Tanner KE, Bonfield W (2001) Dynamic mechanical characterization of biodegradable composites of hydroxyapatite and polylactides. J Biomed Mater Res 58:335–34310.1002/jbm.1026 ↗
5. Roeder RK, Sproul MM, Turner CH (2003) Hydroxyapatite whiskers provide improved mechanical properties in reinforced polymer composites. J Biomed Mater Res A 67:801–81210.1002/jbm.a.10140 ↗
6. Ignjatović N, Tomić S, Dakić M, Miljković M, Plavšić M, Uskoković D (1999) Synthesis and properties of hydroxyapatite/poly-l-lactide composite biomaterials. Biomaterials 20:809–81610.1016/S0142-9612(98)00234-8 ↗
7. Furukawa T, Matsusue Y, Yasunaga T, Shikinami Y, Okuno M, Nakamura T (2000) Biodegradation behavior of ultra-high-strength hydroxyapatite/poly (l-lactide) composite rods for internal fixation of bone fractures. Biomaterials 21:889–89810.1016/S0142-9612(99)00232-X ↗
8. Ajduković Z, Najman S, Đorđević LJ, Savić V, Mihailović D, Petrović D, Ignjatović N, Uskoković D (2005) Repair of bone tissue affected by osteoporosis with hydroxyapatite/poly-l-lactide (HAp-PLLA) with and without blood plasma. J Biomater Appl 20:179–19010.1177/0885328205050519 ↗
9. Dorozhkin SV (2009) Calcium orthophosphate-based biocomposites and hybrid biomaterials. J Mater Sci 44:2343–238710.1007/s10853-008-3124-x ↗
10. Uskoković V, Uskoković D (2011) Nanosized hydroxyapatite and other calcium phosphates: chemistry of formation and application as drug and gene delivery agents. J Biomed Mater Res Part B 96B(152):152–19110.1002/jbm.b.31746 ↗
11. Russias J, Saiz E, Nalla RK, Tomsia AP (2006) Microspheres as building blocks for hydroxyapatite/polylactide biodegradable composites. J Mater Sci 41:5127–5133. doi: 10.1016/j.actbio.2008.04.00610.1007/s10853-006-0449-1 ↗
12. Middleton JC, Tipton AJ (2000) Synthetic biodegradable polymers as orthopedic devices. Biomaterials 21:2335–234610.1016/S0142-9612(00)00101-0 ↗
13. Ignjatović NL, Liu CZ, Czernuszka JT, Uskoković DP (2007) Micro and nano/injectable composite biomaterials of calcium phosphate coated with poly(dl-lactide-co-glycolide). Acta Biomater 3:927–93510.1016/j.actbio.2007.04.001 ↗
14. Shikinami Y, Okuno M (1999) Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-l-lactide (PLLA): part I basic characteristics. Biomaterials 20:859–87710.1016/S0142-9612(98)00241-5 ↗
15. Surrao DC, Waldman SD, Amsden BG (2012) Biomimetic poly(lactide) based fibrous scaffolds for ligament tissue engineering. Acta Biomater 8:3997–400610.1016/j.actbio.2012.07.012 ↗
16. Jung MR, Shim IK, Kim ES, Park YJ, Yang YI, Lee SK, Lee SJ (2011) Controlled release of cell-permeable gene complex from poly(l-lactide) scaffold for enhanced stem cell tissue engineering. J Control Release 152:294–30210.1016/j.jconrel.2011.03.002 ↗
17. Verheyen C, Klein C, de Blieckhogervorst J, Wolke J, van Blitterswijn C, de Groot K (1993) Evaluation of hydroxyapatite/poly(l-lactide) composites: physicochemical properties. J Mater Sci Mater Med 4:58–6510.1007/BF00122979 ↗
18. Fabbri M, Celotti G, Ravaglioli (1995) A hydroxyapatite-based aggregates: physico-chemical nature, structure, texture and architecture. Biomaterials 16:225–22810.1016/0142-9612(95)92121-L ↗
19. Ignjatović N, Suljovrujić E, Budinski-Simendić J, Krakovsky I, Uskoković D (2004) Evaluation of hot-pressed hydroxyapatite/poly-l-lactide composite biomaterial characteristics. J Biomed Mater Res Part B 71B:284–29410.1002/jbm.b.30093 ↗
20. Ignjatović N, Ninkov P, Ajduković Z, Vasiljević-Radović D, Uskoković D (2007) biphasic calcium phosphate/poly-d,l-lactide-co-glycolide composite biomaterial as bone substitute. J Eur Ceram Soc 27:1589–159410.1016/j.jeurceramsoc.2006.04.104 ↗
21. Lloyd DR, Ward TC, Schreiber HP (1989) Inverse gas chromatography. Characterization of Polymers and other materials. ACS Symposium Series, 391 Washington, DC10.1021/bk-1989-0391 ↗
22. Conder JR, Young CL (1979) Physicochemical measurements in gas chromatography. Wiley, New York
23. Kaya I, Ilter Z, Senol D (2002) Thermodynamic interactions and characterisation of poly[(glycidyl methacrylate-co-methyl, ethyl, butyl) methacrylate] by inverse gas chromatography. Polymer 43:6455–646310.1016/S0032-3861(02)00554-2 ↗
24. Reid RC, Prausnitz JM, Sherwood TK (1977) The properties of gases and liquids. Mc Graw-Hill, New York
25. DiPaola-Baranyi G, Guillet JE (1978) Estimation of polymer solubility parameters by gas chromatography. Macromolecules 11:228–23510.1021/ma60061a043 ↗
26. Voelkel A, Strzemiecka B, Adamska K, Milczewska K (2009) Inverse gas chromatography as a source of physiochemical data. J Chromatogr A 1216:1551–156610.1016/j.chroma.2008.10.096 ↗
27. Zhao L, Choi P (2001) Determination of solvent-independent polymer–polymer interaction parameter by an improved inverse gas chromatographic approach. Polymer 42:1075–108110.1016/S0032-3861(00)00412-2 ↗
28. Huang JC (2006) Anomalous solubility parameter and probe dependency of polymer–polymer interaction parameter in inverse gas chromatography. Eur Polym J 42:1000–100710.1016/j.eurpolymj.2005.11.001 ↗
29. Panayiotou C (2013) Polymer–polymer miscibility and partial solvation parameters. Polymer 54:1621–163810.1016/j.polymer.2013.01.028 ↗
30. Héberger K, Milczewska K, Voelkel A (2005) Principal component analysis of polymer–solvent and filler–solvent interactions by inverse gas chromatography. Colloids Surf A 260:29–3710.1016/j.colsurfa.2005.02.029 ↗
31. Hamieh T, Fadlallah MB, Schultz J (2002) New approach to characterize physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution: III. Determination of the acid–base properties of some solid substrates (polymers, oxides and carbon fibres): a new model. J Chromatogr A 969:37–4710.1016/S0021-9673(02)00369-2 ↗
32. Nastasović AB, Onjia A, Milonjić SK, Jovanović SM (2005) Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography. Eur Polym J 41:1234–124210.1016/j.eurpolymj.2004.12.020 ↗
33. Cava D, Gavara R, Lagarón JM, Voelkel A (2007) Surface characterization of poly(lactic acid) and polycaprolactone by inverse gas chromatography. J Chromatogr A 1148:86–9110.1016/j.chroma.2007.02.110 ↗
34. Hamieh T, Schultz J (2002) New approach to characterize physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution: II. Study of the transition temperatures of poly(methyl methacrylate) at various tacticities and of poly(methyl methacrylate) adsorbed on alumina and silica. J Chromatogr A 969:27–3610.1016/S0021-9673(02)00358-8 ↗
35. Nastasović AB, Onjia AE, Milonjić SK, Jovanović SM (2005) Determination of thermodynamic properties of macroporous glycidyl methacrylate-based copolymers by inverse gas chromatography under finite surface coverage. J Polym Sci Part B 43:2524–253310.1002/polb.20538 ↗
36. Benabdelghani Z, Etxeberria A, Djadoun S, Iruin JJ, Uriarte C (2006) The phase behaviour of poly(styrene-co-methacrylic acid)/poly(2,6-dimethyl-1,4-phenylene oxide) by inverse gas chromatography. J Chromatogr A 1127:237–24510.1016/j.chroma.2006.05.093 ↗
37. Nastasović AB, Onjia A (2008) Determination of glass temperature of polymers by inverse gas chromatography (review). J Chromatogr A 1195:1–1510.1016/j.chroma.2008.05.009 ↗
38. Zhong B, Al-Saigh ZY (2012) Characterization of biodegradable polymers by inverse gas chromatography. III. Blends of amylopectin and poly(l-lactide). J Appl Polym Sci 123:2616–262710.1002/app.34516 ↗
39. Eser H, Tihminlioglu F (2006) Determination of thermodynamic and transport properties of solvents and non solvents in poly(l-lactide-co-glycolide). J Appl Polym Sci 102:2426–243210.1002/app.24516 ↗
40. Al-Saigh ZY (1999) Inverse gas chromatographic characterization of poly(ethylene oxide). Polymer 40:3479–348510.1016/S0032-3861(98)00534-5 ↗
41. Miličević D, Trifunović S, Dojčilović J, Ignjatović N, Suljovrujić E (2010) The influence of gamma radiation on the molecular weight and glass transition of PLLA and HAp/PLLA nanocomposite. Nucl Instrum Methods Phys Res Sect B 268:2744–274910.1016/j.nimb.2010.06.036 ↗
42. Fox TG, Flory PJ (1948) Viscosity-molecular weight and viscosity-temperature relationships for polystyrene and polyisobutylene. J Am Chem Soc 70:2384–239510.1021/ja01187a021 ↗
43. Qian R, Wu L, Shen D, Napper DH, Mann RA, Sangster DF (1993) Single-chain polystyrene glasses. Macromolecules 26:2950–295310.1021/ma00063a046 ↗
44. Liao K, Quan D, Lu Z (2002) Effects of physical aging on glass transition behavior of poly(dl-lactide). Eur Polym J 38:157–16210.1016/S0014-3057(01)00166-5 ↗
45. Lavoie A, Guillet JE (1969) Estimation of glass transition on temperatures from gas chromatographic studies on polymers. Macromolecules 2:443–44610.1021/ma60010a027 ↗
46. Davis PK, Danner RP, Duda JL, Romdhane IH (2004) Use of inverse gas chromatography to study binary polymer–solvent systems near the glass transition temperature. Macromolecules 37:9201–921010.1021/ma0347767 ↗
47. Ignjatović N, Nastasović A, Laninović V, Onjia A, Miljković M (2004) Preparation and properties of polymeric and composite bioresorbable barrier membranes. Mater Sci Forum 453–454:537–54210.4028/www.scientific.net/MSF.453-454.537 ↗
48. Milczewska K, Voelkel A (2002) Characterization of the interactions in polymer-filler systems by inverse gas chromatography. J Chromatogr A 969:255–25910.1016/S0021-9673(02)00891-9 ↗
49. Guillet JE, Purnell JH (1973) Advances in analytical chemistry and instrumentation gas chromatography. Wiley, New York
50. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, New York
51. Santos JMRCA, Guthrie JT (2005) Analysis of interactions in multicomponent polymeric systems: The key-role of inverse gas chromatography. Mater Sci Eng R 50:79–10710.1016/j.mser.2005.07.003 ↗
52. Liu Y, Shi B (2008) Determination of Flory interaction parameters between polyimide and organic solvents by HSP theory and IGC. Polym Bull 61:501–50910.1007/s00289-008-0963-1 ↗
53. Voelkel A (2012) Physicochemical measurements (inverse gas chromatography). In: Poole CF (ed) Gas chromatography. Elsevier, Amsterdam, pp 477–49410.1016/B978-0-12-385540-4.00020-1 ↗
54. Barton AFM (1991) CRC handbook of solubility parameter and other cohesion parameters. CRC Press, Boca Raton
55. Blanks RF, Prausnitz JM (1964) Thermodynamics of polymer solubility in polar and nonpolar systems. Ind Eng Chem Fundam 3:1–810.1021/i160009a001 ↗
56. Klein J, Jeberien HE (1980) Chainlength dependence of thermodynamic properties of poly(ethylene glycol). Macromol Chem 181:1237–124910.1002/macp.1980.021810608 ↗