journal article·2015-07

High-pressure torsion of thick Cu and Al–Mg–Sc ring samples

Hideaki Iwaoka, Zenji Horita

Journal of Materials Science· Volume 50· Issue 14
Publisher page

Abstract

Pure Cu and an Al–3 %Mg–0.2 %Sc alloy are processed by high-pressure torsion with ring-shape samples having an initial thickness of 4 mm. Microstructural observation across the thickness is carried out using optical microscopy and transmission electron microscopy to correlate with hardness variation. It is shown that the strain is introduced more intensely in the center of thickness on the cross sections for both pure Cu and the Al alloy. This area expands with an increasing number of revolutions but the expansion saturates before covering the entire cross section. Softening occurs with straining in pure Cu but saturation reaches without softening in the Al alloy. It is suggested that imposed strain is estimated using the thickness of severely deformed region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Bridgman PW (1935) Effects of high shearing stress combined with high hydrostatic pressure. Phys Rev 48:825–84710.1103/PhysRev.48.825 ↗
2. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45:103–18910.1016/S0079-6425(99)00007-9 ↗
3. Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu YT (2006) Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58(4):33–3910.1007/s11837-006-0213-7 ↗
4. Zhilyaev AP, Langdon TG (2008) Using high-pressure torsion for metal processing: fundamentals and applications. Prog Mater Sci 53:893–97910.1016/j.pmatsci.2008.03.002 ↗
5. Wei Q, Zhang HT, Schuster BE, Ramesh KT, Valiev RZ, Kecskes LJ, Dowding RJ, Magness L, Cho K (2006) Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion. Acta Mater 54:4079–408910.1016/j.actamat.2006.05.005 ↗
6. Lee S, Edalati K, Horita Z (2010) Microstructures and mechanical properties of pure V and Mo processed by high-pressure torsion. Mater Trans 51:1072–107910.2320/matertrans.M2009375 ↗
7. Korznikov AV, Tram G, Dimitrov O, Korznikova GF, Idrisova SR, Pakiela Z (2001) The mechanism of nanocrystalline structure formation in Ni3Al during severe plastic deformation. Acta Mater 49:663–67110.1016/S1359-6454(00)00345-1 ↗
8. Ciuca O, Tsuchiya K, Yokoyama Y, Todaka Y, Umemoto M (2010) Heterogeneous process of disordering and structural refinement in Ni3Al during severe plastic deformation by high-pressure torsion. Mater Trans 51:14–2210.2320/matertrans.MB200915 ↗
9. Edalati K, Matsuda J, Arita M, Daio T, Akiba E, Horita Z (2013) Mechanism of activation of TiFe intermetallics for hydrogen storage by severe plastic deformation using high-pressure torsion. Appl Phys Lett 103:14390210.1063/1.4823555 ↗
10. Edalati K, Toh S, Ikoma Y, Horita Z (2011) Plastic deformation and allotropic phase transformations in zirconia ceramics during high-pressure torsion. Scr Mater 65:974–97710.1016/j.scriptamat.2011.08.024 ↗
11. Levitas VI, Ma Y, Selvi E, Wu J, Patten JA (2012) High-density amorphous phase of silicon carbide obtained under large plastic shear and high pressure. Phys Rev B 85:05411410.1103/PhysRevB.85.054114 ↗
12. Edalati K, Horita Z (2010) Application of high-pressure torsion for consolidation of ceramic powders. Scr Mater 63:174–17710.1016/j.scriptamat.2010.03.048 ↗
13. Edalati K, Iwaoka H, Toh S, Sasaki K, Horita Z (2013) Application of high-pressure torsion to WC-Co ceramic-based composites for improvement of consolidation, microstructure and hardness. Mater Trans 54:1540–154810.2320/matertrans.MH201318 ↗
14. Islamgaliev RK, Kuzel R, Mikov SN, Igo AV, Burianek J, Chmelik F, Valiev RZ (1999) Structure of silicon processed by severe plastic deformation. Mater Sci Eng A 266:205–21010.1016/S0921-5093(99)00030-1 ↗
15. Ikoma Y, Hayano K, Edalati K, Saito K, Guo Q, Horita Z (2012) Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion. Appl Phys Lett 101:12190810.1063/1.4754574 ↗
16. Ikoma Y, Hayano K, Edalati K, Saito K, Guo Q, Horita Z, Aoki T, Smith DJ (2014) Fabrication of nanograined silicon by high-pressure torsion. J Mater Sci 49:6565–6569. doi: 10.1007/s10853-014-8250-z10.1007/s10853-014-8250-z ↗
17. Ikoma Y, Ejiri Y, Hayano K, Saito K, Guo Q, Horita Z (2014) Nanograin formation of GaAs by high-pressure torsion. Philos Mag Lett 94:1–810.1080/09500839.2013.852265 ↗
18. Harai Y, Ito Y, Horita Z (2008) High-pressure torsion using ring specimens. Scr Mater 58:469–47210.1016/j.scriptamat.2007.10.037 ↗
19. Harai Y, Edalati K, Horita Z, Langdon TG (2009) Using ring samples to evaluate the processing characteristics in high-pressure torsion. Acta Mater 57:1147–115310.1016/j.actamat.2008.10.046 ↗
20. Sakai G, Nakamura K, Horita Z, Langdon TG (2005) Developing high-pressure torsion for use with bulk samples. Mater Sci Eng A 406:268–27310.1016/j.msea.2005.06.049 ↗
21. Yoon SC, Horita Z, Kim HS (2008) Finite element analysis of plastic deformation behavior during high pressure torsion processing. J Mater Process Technol 201:32–3610.1016/j.jmatprotec.2007.11.204 ↗
22. Hohenwarter A, Bachmaier A, Gludovatz B, Scheriau S, Pippan R (2009) Technical parameters affecting grain refinement by high pressure torsion. Int J Mater Res 100:1653–166110.3139/146.110224 ↗
23. Iwaoka H, Harai Y, Horita Z (2010) High-pressure torsion for ring samples in different thicknesses. Mater Sci Forum 667–669:51–5610.4028/www.scientific.net/MSF.667-669.51 ↗
24. Iwaoka H, Fujioka T, Harai Y, Horita Z (2011) Development of intense plastic strain and ultrafine grains in thicker samples processed by high-pressure torsion and high-pressure sliding. J Japan Inst Metals 75:412–41810.2320/jinstmet.75.412 ↗
25. Figueiredo RB, Aguilar MTP, Cetlin PR, Langdon TG (2012) Analysis of plastic flow during high-pressure torsion. J Mater Sci 47:7807–7814. doi: 10.1007/s10853-012-6506-z10.1007/s10853-012-6506-z ↗
26. Song Y, Wang W, Gao D, Kim HS, Yoon EY, Lee DJ, Lee CS, Guo J (2012) Inhomogeneous hardness distribution of high pressure torsion processed IF steel disks. Mater Sci Appl 3:234–239
27. Hohenwarter A (2015) Incremental high pressure torsion as a novel severe plastic deformation process: processing features and application to copper. Mater Sci Eng A 626:80–8510.1016/j.msea.2014.12.041 ↗
28. Ito Y, Horita Z (2009) Microstructural evolution in pure aluminum processed by high-pressure torsion. Mater Sci Eng A 503:32–3610.1016/j.msea.2008.03.055 ↗
29. Xu C, Horita Z, Langdon TG (2007) The evolution of homogeneity in processing by high-pressure torsion. Acta Mater 55:203–21210.1016/j.actamat.2006.07.029 ↗
30. Edalati K, Horita Z (2011) Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion. Mater Sci Eng A 528:7514–752310.1016/j.msea.2011.06.080 ↗
31. Kawasaki M (2014) Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion. J Mater Sci 49:18–34. doi: 10.1007/s10853-013-7687-910.1007/s10853-013-7687-9 ↗
32. Edalati K, Fujioka T, Horita Z (2008) Microstructure and mechanical properties of pure Cu processed by high-pressure torsion. Mater Sci Eng A 497:168–17310.1016/j.msea.2008.06.039 ↗
33. Sakai G, Horita Z, Langdon TG (2005) Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion. Mater Sci Eng A 393:344–35110.1016/j.msea.2004.11.007 ↗
34. Horita Z, Langdon TG (2005) Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion. Mater Sci Eng A 410–411:422–42510.1016/j.msea.2005.08.133 ↗
35. Kawasaki M, Ahn B, Langdon TG (2010) Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion. J Mater Sci 45:4583–4593. doi: 10.1007/s10853-010-4420-910.1007/s10853-010-4420-9 ↗
36. Kawasaki M, Figueiredo RB, Langdon TG (2011) An investigation of hardness homogeneity throughout disks processed by high-pressure torsion. Acta Mater 59:308–31610.1016/j.actamat.2010.09.034 ↗
37. Edalati K, Yamamoto A, Horita Z, Ishihara T (2011) High-pressure torsion of pure magnesium: evolution of mechanical properties, microstructures and hydrogen storage capacity with equivalent strain. Scr Mater 64:880–88310.1016/j.scriptamat.2011.01.023 ↗
38. Edalati K, Cubero-Sesin JM, Alhamidi A, Mohamed IF, Horita Z (2014) Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of pure metals: investigation using high-pressure torsion. Mater Sci Eng A 613:103–11010.1016/j.msea.2014.06.084 ↗
39. Edalati K, Horita Z, Furuta T, Kuramoto S (2013) Dynamic recrystallization and recovery during high-pressure torsion: experimental evidence by torque measurement using ring specimens. Mater Sci Eng A 559:506–50910.1016/j.msea.2012.08.132 ↗
40. Edalati K, Ito Y, Suehiro K, Horita Z (2009) Softening of high purity aluminum and copper processed by high pressure torsion. Int J Mater Res 100:1668–167310.3139/146.110231 ↗
41. Wetscher F, Vorhauer A, Stock R, Pippan R (2004) Structural refinement of low alloyed steels during severe plastic deformation. Mater Sci Eng A 387–389:809–81610.1016/j.msea.2004.01.096 ↗