Effect of heat-treatment on phase stability and grain coarsening in a powder-processed Al–Ni–Co–Zr–Y alloy
Source abstract
Abstract
Processing of Al alloys via metastable amorphous intermediates can give much higher volume fractions of dispersed strengthening phases than in conventional precipitation- or dispersion-hardened systems. Here, we report a study on an Al–Ni–Co–Zr–Y alloy processed by gas atomization and consolidated/devitrified by warm extrusion. X-ray diffraction and electron microscopy are used to reveal the effects of heat-treatments at 300–500 °C for up to 96 h on the phase stability and coarsening behavior of the alloy. In all samples, the microstructure contains 22 % by volume of Al19(Ni,Co)5Y3 plates surrounded by grains of FCC Al. Samples heat-treated at 350 °C and above also contain fine Al3Y and Al3Zr particles as minority phases. The softening of the alloy is limited for heat-treatment temperatures of up to 400 °C, and the Al19(Ni,Co)5Y3 plates coarsen slowly. At higher temperatures, abnormal coarsening is observed with the development of a secondary population of much larger Al19(Ni,Co)5Y3 plates. An analysis of the coarsening kinetics gives a constant coarsening exponent of 3, but a distinct transition in the activation energies. These values suggest that the normal coarsening at lower temperatures occurs by short-circuit diffusion, whereas the abnormal coarsening at higher temperatures involves lattice diffusion. The Al grain size is dictated by the Al19(Ni,Co)5Y3 inter-plate separation, and grain growth is limited by the extent of plate coarsening. Such systems could form the basis of new high-strength high-temperature Al alloys for structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. He Y, Poon SJ, Shiflet GJ (1988) Synthesis and properties of metallic glasses that contain aluminum. Science 241:1640–164210.1126/science.241.4873.1640 ↗
2. Chen H, He Y, Shiflet GJ, Poon SJ (1991) Mechanical properties of partially crystallized aluminum based metallic glasses. Scr Metall Mater 25:1421–142410.1016/0956-716X(91)90426-2 ↗
3. Greer AL (1995) Metallic glasses. Science 267:1947–195310.1126/science.267.5206.1947 ↗
4. Inoue A, Kimura H (1997) High-strength Al-based nanostructure alloys. Curr Opin Solid State Mater Sci 2:305–31010.1016/S1359-0286(97)80120-9 ↗
5. Battezzati L, Kusy M, Rizzi P, Ronto V (2004) Devitrification of Al–Ni-rare earth amorphous alloys. J Mater Sci 39:3927–393410.1023/B:JMSC.0000031473.19334.5b ↗
6. Suryanarayana C, Klassen T, Ivanov E (2011) Synthesis of nanocomposites and amorphous alloys by mechanical alloying. J Mater Sci 46:6301–631510.1007/s10853-011-5287-0 ↗
7. Inoue A, Nakamura T, Sugita T, Zhang T, Masumoto T (1993) Bulky La–Al–TM (TM = transition metal) amorphous alloys with high tensile strength produced by a high-pressure die casting method. Mater Trans JIM 34:351–35810.2320/matertrans1989.34.351 ↗
8. Calin M, Koster U (1998) Nanocrystallization of Al–Ni–Y and Al–Ni–Nd metallic glasses. Mater Sci Forum 269–272:749–75410.4028/www.scientific.net/MSF.269-272.749 ↗
9. Allen DR, Foley JC, Perepezko JH (1998) Nanocrystal development during primary crystallization of amorphous alloys. Acta Mater 46:431–44010.1016/S1359-6454(97)00279-6 ↗
10. Gangopadhyay AK, Kelton KF (2000) Effect of rare-earth atomic radius on the devitrification of Al88RE8Ni4 amorphous alloys. Philos Mag A 80:1193–120610.1080/01418610008212110 ↗
11. Magdefrau NJ, Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2004) Effect of heat-treatment on the microstructure and hardness of a devitrified Al-3.0Y-3.0Gd-5.0Ni-1.0Fe-1.0Co alloy. Scr Mater 51:485–48910.1016/j.scriptamat.2004.05.050 ↗
12. Gordillo MA, Zhang LC, Watson TJ, Aindow M (2013) Effect of upset forging on microstructure and tensile properties in a devitrified Al–Y–Ni–Co alloy. J Mater Sci 48:3841–385110.1007/s10853-013-7185-0 ↗
13. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2004) Phase stability and microstructure in devitrified Al-rich Al–Y–Ni alloys. Intermetallics 12:349–36210.1016/j.intermet.2003.11.007 ↗
14. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2005) phase formation during the devitrification of al-rich melt-spun Al-8.5Ni-5.0Y-3.0(Co, Fe) alloys. Scr Mater 52:699–70410.1016/j.scriptamat.2004.12.024 ↗
15. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2005) The structure of ternary compounds in Al–Gd–Ni alloys. Intermetallics 13:741–74810.1016/j.intermet.2004.11.004 ↗
16. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2003) Crystallization of aluminum in powder-processed al-rare earth-transition metal alloys. Mater Res Soc Symp Proc 754:CC11.710.1557/PROC-754-CC11.7 ↗
17. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2004) Devitrification mechanisms in Al–Y–Ni glasses. Mater Res Soc Symp Proc 806:MM2.11
18. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2004) TEM studies of devitrification products in Al–Gd–Ni–(Fe) alloys, Mater Res Soc Symp Proc 806:MM5.910.1557/PROC-806-MM5.9 ↗
19. Vasiliev AL, Aindow M, Blackburn MJ, Watson TJ (2004) Microstructure and ternary phases in Al-rich Al–Y–Ni alloys. Mater Res Soc Symp Proc 806:MM5.10
20. Rykhal RM, Zarechnyuk OS (1977) Isothermal 800 °C section of the ternary system Y–Ni–Al in the range 0–33.3 at.%. Dopov Acad Nauk Ukr SSRA 4:375–377
21. Latuch J, Matyja H, Fadeeva VI (1994) Crystallization of amorphous Al85Y10Ni5 and Al85Y5Ni10 alloys. Mater Sci Eng A 179:506–51010.1016/0921-5093(94)90256-9 ↗
22. Bassim N, Kiminami CS, Kaufman MJ (2000) phases formed during crystallization of amorphous Al84Y9Ni5Co2 alloy. J Non Cryst Solids 273:271–27610.1016/S0022-3093(00)00135-6 ↗
23. Abrosimova GE, Aronin AS, Zver’kova II, Kir’yanov YV (2002) Phase transformations upon crystallization of amorphous Al–Ni–RE alloys. Phys Metal Metallogr 94:102–107
24. Gibson MA, Bettles CJ (2002) Crystallization of an amorphous Al75Ni21Y4 alloy melt-spun ribbon. Mater Lett 57:982–98710.1016/S0167-577X(02)00910-2 ↗
25. Raggio R, Borzone G, Ferro R (2000) The Al-rich region in the Y–Ni–Al system: microstructures and phase equilibria. Intermetallics 8:247–25710.1016/S0966-9795(99)00100-4 ↗
26. Gladyshevskii RE, Cenzual K, Parthé E (1992) The crystal structure of orthorhombic Gd3Ni5Al19: a new representative of the structure series R2+mT4+mAl15+4m. J Solid State Chem 100:9–1510.1016/0022-4596(92)90150-T ↗
27. Gordillo MA, Cernatescu I, Aindow TT, Watson TJ, Aindow M (2014) Phase stability in a powder-processed Al–Mn–Ce alloy. J Mater Sci 49:3742–375410.1007/s10853-014-8086-6 ↗
28. Bailey DM (1967) The structures of two polymorphic forms of YAl3. Acta Crystallogr A 23:729–73310.1107/S0365110X67003603 ↗
29. Raghavan V (2010) Al–Ni–Y (aluminum–nickel–yttrium). J Phase Equilib Diffus 31:57–5810.1007/s11669-009-9625-8 ↗
30. Neumann G, Tuijn C (2009) Self-diffusion and impurity diffusion in pure metals, 1st edn. Elsevier, Oxford, pp 121–148
31. Corti CW, Cotterill P, Fitzpatrick G (1974) Evaluation of the interparticle spacing in dispersion alloys. Int Metall Rev 19:77–8810.1179/095066074790137088 ↗
32. Muoto CK, Jordan EH, Gell M, Aindow M (2011) Phase homogeneity in Y2O3–MgO nanocomposites synthesized by thermal decomposition of nitrate precursors with ammonium acetate additions. J Am Ceram Soc 94:4207–421710.1111/j.1551-2916.2011.04787.x ↗