journal article·2007-07

Effect of the thickness of Bi–Te compound and Cu electrode on the resultant Seebeck coefficient in touching Cu/Bi–Te/Cu composites

Osamu Yamashita, Hirotaka Odahara

Journal of Materials Science· Volume 42· Issue 13
Publisher page

Abstract

The resultant Seebeck coefficient α of the touching p- and n-type Cu/Bi–Te/Cu composites with different thicknesses of t Bi–Te and t Cu was measured as a function of t, where t Bi–Te was varied from 0.1 to 2.0 mm, t Cu from 0.3 to 4.0 mm and t is the lapse time after imposing the voltage. The temperature difference ΔT is produced by imposing a constant voltage of 1.70 V on two Peltier modules connected in series. The resultant α of composites was calculated from the relation α = ΔV/ΔT, where ΔV and ΔT were measured with two probes placed on both end coppers. ΔV decreases abruptly with an increase of t below t = 5 min, while above t = 7 min, it tends to saturate to a constant value. The resultant α and saturated ΔV vary significantly with changes in t Cu and t Bi–Te. When a composite has a combination of t Cu = 1.0 mm and t Bi–Te=0.1 mm, the generating powers ΔW (=(ΔV)2/4R) estimated using the saturated ΔV and calculated electrical resistance R for the p- and n-type composites have great local maximum values which are 4–5 times as large as those obtained for the conventional combination of t Bi-Te = 2.0 mm and t Cu = 0.3 mm. It is surprising that the generating power ΔW is enhanced significantly by sandwiching a very thin Bi–Te material between two thick coppers, unlike the conventional composition of thermoelectric modules. On the other hand, when a composite has a combination of t Bi–Te = 0.1 mm and t Cu = 0.3 mm, the resultant α of the p- and n-type composites exhibited great values of 711 and −755 μV/K, respectively, so that the maximum resultant ZT of the p- and n-type composites reached extremely large values of 8.81 and 5.99 at 298 K. However, the resultant ZT decreases rapidly with an increase of t Cu or t Bi–Te. The resultant ZT is thus found to be enhanced significantly not only in superlattice systems but also in macroscopic composites. The present enhancement in ZT is attributed to the large barrier thermo-emf generated in the Bi–Te region shallower than 50 μm from the boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Wood C (1988) Prog Phys 51:45910.1088/0034-4885/51/4/001 ↗
2. Mahan G, Sales B, Sharp J (1997) Phys Today 50:4210.1063/1.881752 ↗
3. Hicks LD, Dresselhaus MS (1993) Phys Rev B 47:1272710.1103/PhysRevB.47.12727 ↗
4. Hicks LD, Harman TC, Dresselhaus MS (1993) Appl Phys Lett 63:323010.1063/1.110207 ↗
5. Broido DA, Reinecke TL (1995) Appl Phys Lett 67:117010.1063/1.114998 ↗
6. Goldsmid HJ (1964) Thermoelectric refrigeration. Plenum, NewYork10.1007/978-1-4899-5723-8 ↗
7. Koga T, Rabin O, Dresselhaus MS (2000) Phys Rev B 62:1670310.1103/PhysRevB.62.16703 ↗
8. Venkatasubramanian R, Siivola E, Colpitts T, O’quinn B (2001) Nature 413:59710.1038/35098012 ↗
9. Bergman DJ, Levy O (1991) J Appl Phys 70:682110.1063/1.349830 ↗
10. Tauc J (1953) Czechosl J Phys 3:28210.1007/BF01687318 ↗
11. Balmush II, Dashevsky ZM, Kasiyan AI (1995) Semiconductors 29:937
12. Yamashita O, Odahara H, Satou K (2005) J Mater Sci 40:107110.1007/s10853-005-6919-z ↗
13. Yamashita O, Satou K, Odahara H, Tomiyoshi S (2005) J Appl Phys 98:07370710.1063/1.2081113 ↗
14. Odahara H, Yamashita O, Satou K, Tomiyoshi S, Tani J, Kido H (2005) J Appl Phys 97:10372210.1063/1.1895468 ↗
15. Yamashita O, Odahara H (2005) J Mater Sci 41:279510.1007/s10853-006-6133-7 ↗
16. Yamashita O, Odahara H (2005) J Mater Sci 41:743710.1007/s10853-006-0810-4 ↗
17. Yamashita O, Tomiyoshi S (2004) J Appl Phys 95:627710.1063/1.1712013 ↗
18. Yamashita O, Tomiyoshi S (2004) J Appl Phys 95:16110.1063/1.1630363 ↗
19. Yim WM, Rosi FD (1972) Solid State Electron 15:112110.1016/0038-1101(72)90172-4 ↗
20. Yamashita O, Tomiyoshi S (2003) Jpn J Appl Phys 42:49210.1143/JJAP.42.492 ↗
21. Dismukes JP, Ekstrom L, Steigmeier EF, Kudman I, Beers DS (1964) J Appl Phys 35:289910.1063/1.1713126 ↗
22. Mahan GD, Bartkowiak M (1999) Appl Phys Lett 74:95310.1063/1.123420 ↗
23. Bartkowiak M, Mahan GD (2001) In: Tritt TM (ed) Recent trends in thermoelectric materials research II: semiconductors and semimetals, vol 70. Academic, New York, p 24510.1016/S0080-8784(01)80142-3 ↗
24. Kittel C (1996) Introduction to solid state physics. John Wiley & Sons, NewYork