journal article·2007-10

Impact modification of SAN using NR-g-SAN copolymers

Benny George, S. N. Maiti, I. K. Varma

Journal of Materials Science· Volume 42· Issue 19
Publisher page

Abstract

The paper demonstrates the efficacy of natural rubber-g-poly (styrene-co-acrylonitrile) (NR-g-SAN) copolymers as impact modifier for SAN. The impact behaviour of SAN /NR-g-SAN blends were studied as a function of cross-link density of NR, percent grafting, rubber content in the blend and the AN content in the grafted chain. The cross-link density of NR had no significant effect on impact strength of the blends whereas increase in percent grafting (PG) of the rubber significantly improved the impact strength. Thus the impact strength increased four times when the PG of the rubber was increased from 34.2 to 65%. Further increase in PG decreased the impact strength. Similar trend was observed on increase in the rubber content, the maximum impact strength was observed at 20% rubber. The impact strength also depended on the acrylonitrile content of the grafted chain. Tensile and flexural strength and modulus of these blends were not influenced by PG and AN content in the grafted chain whereas these properties decreased with the increase in the rubber content. Scanning electron microscopic studies of the impact fractured surfaces showed cavitation of rubber particles and craze induced matrix deformation. Dynamic mechanical studies confirmed the two-phase structure of these blends.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Utracki LA (1998) In: Commercial polymer blends, Chap.10. Chapman and Hall, London10.1007/978-1-4615-5789-0 ↗
2. Keskkula H, Paul DR (1994) In: Collyer AA (ed) Rubber toughened engineering plastics. Chapman and Hall, London, p 146
3. Echte A, (1989) In: Riew CK (ed), Advances in chemistry series, 222. ACS, Washington D. C. p 17
4. Chauvel B, Daniel JC (1975) In: Platzer NAJ (ed) Advances in chemistry series, 142. ACS, Washington DC, p 159
5. Kidder KR (1993) (to General Electric) Eu Pat 564240
6. Ishiga N (1993) (to Mitsubishi Monsanto Chemical Company) US 5225494
7. Leng PB, Shields N, Hentone DE (1991) (to Dow Chemical company) US 5041498
8. Bubeck RA, Clipper RB, Hentone DE (1989) (to Dow Chemical company) US 4874815
9. Morbitzer L, Kranz D, Humme G, Ott KH (1976) J Appl Polym Sci 20:269110.1002/app.1976.070201007 ↗
10. Kranz D, Morbitzer L, Oh KH, Casper R (1977) Angew Makromol Chem 58/59:21310.1002/apmc.1977.050580109 ↗
11. Ricco T, Pavan A, Danusso F (1975) Polymer 16:68510.1016/0032-3861(75)90077-4 ↗
12. Rink M, Ricco T, Lubert W, Pavan A (1978) J Appl Polym Sci 22:42910.1002/app.1978.070220212 ↗
13. Kim H, Keskkula H, Paul DR (1990) Polym Eng Sci 30:137310.1002/pen.760300505 ↗
14. Kim H, Keskkula H, Paul DR (1990) Polymer 31:86910.1016/0032-3861(90)90049-5 ↗
15. Kim H, Keskkula H, Paul DR (1991) Polymer 32:144710.1016/0032-3861(91)90425-I ↗
16. Okaniwa M, Suzuki M. (2001) J Appl Polym Sci 81:346210.1002/app.1802 ↗
17. Keskkula H, Turly SG (1978) Polymer 19:79710.1016/0032-3861(78)90007-1 ↗
18. Tangboriboonrat P, Tiyapiboonchaiya CJ (1999) J Appl Polym Sci 71:133310.1002/(SICI)1097-4628(19990222)71:8<1333::AID-APP13>3.0.CO;2-B ↗
19. Schneider M, Pith T, Lambla M (1996) Polym Adv Technol 7:42510.1002/(SICI)1099-1581(199605)7:5/6<425::AID-PAT504>3.0.CO;2-N ↗
20. Schneider M, Pith T, Lambla M (1996) Polym Adv Technol 7:57710.1002/(SICI)1099-1581(199607)7:7<577::AID-PAT544>3.0.CO;2-A ↗
21. Schneider M, Pith T, Lambla M (1997) J Mater Sci 32:519110.1023/A:1018638021609 ↗
22. George B (June 2002) In: Studies on grafting of natural rubber and its blends with poly (styrene-co-acrylonitrile). Ph.D thesis submitted to Indian Institute of Technology, Delhi p.42
23. George B, Maiti SN, Varma IK (2006) J Elastomers and Plastics 38:31910.1177/0095244306067129 ↗
24. Walker I, Collyer AA (1994) In: Collyer AA (ed) Rubber toughened engineering plastics, Chapman and Hall, London, p 3810.1007/978-94-011-1260-4 ↗
25. Steenberg AC, Litvinov VM, Gaymans RJ (1998) Polymer 39:481710.1016/S0032-3861(97)10103-3 ↗
26. Makuuchi K, Hagiwara M (1984) J App Polym Sci 29:96510.1002/app.1984.070290324 ↗
27. Makuuchi K, Hagiwara M, Serizawa T (1984) Radiation Phy Chem 24:203
28. Mendelson RA (1985) J Polym Sci Polym Phy Edn 23:197510.1002/pol.1985.180231001 ↗
29. Bucknell CB, Cote FF, Partridge IK (1986) J Mater Sci 21:30110.1007/BF01144736 ↗
30. Cho K, Yang J, Park CE (1998) Polymer 39:307310.1016/S0032-3861(97)00410-2 ↗
31. Donald AM, Kramer EJ (1982) J Mater Sci 17:176510.1007/BF00540805 ↗
32. Bohn L (1975) In: Platzer NAJ (eds), Advances in chemistry series, 142. Chap. 6. ACS, Washington DC
33. Murayama T, Lawton EL (1973) J App Polym Sci 17:66910.1002/app.1973.070170301 ↗
34. Chua PS (1987) Polymer composites 8:30810.1002/pc.750080505 ↗