journal article·2011-09

Comments on “Model and analysis of size-stiffening in nanoporous cellular solids” by Wang and Lam [J. Mater. Sci. 44, 985–991 (2009)]

Harm Askes, Elias C. Aifantis

Journal of Materials Science· Volume 46· Issue 18
Publisher page

Abstract

The mechanical response of microstructured materials can be modelled with sufficient accuracy and efficiently through gradient elasticity. Compared to classical elasticity, the governing equations of gradient elasticity are equipped with additional spatial gradients of relevant variables (such as strains and/or accelerations). Through the inclusion of these additional gradients, phenomena that are dominated by microstructural influences can be modelled accurately and realistically, such as stress and strain concentrations around crack tips [2–5] or dislocation cores [6–8], and the size-dependent mechanical behaviour of specimens [4, 9, 10]. For a more recent account on the use of gradient theory to eliminate elastic singularities in dislocation lines and crack tips, as well as to interpret size effects, one may consult [11]. In dynamics, there is the additional motivation of simulating dispersive wave propagation, but this is beyond the scope of this short note. Since the partial differential equations (p.d.e.) of gradient elasticity are typically fourth-order equations in terms of displacements, finite element discretisation is usually not straightforward. However, various solutions methods have been suggested and demonstrated. Of particular interest in the context of this short discussion is the solution strategy of Ru and Aifantis, whereby the fourth-order p.d.e. are split into two sets of second-order p.d.e. which can be solved in a decoupled manner [3]. This particular strategy thus enables the use of standard finite element discretisation with continuity of the displacements only [4, 5, 12]. However, it also requires a specific format of the governing equations, in particular, with respect to the constitutive coefficients (or internal length parameters) that accompany the higher-order terms. Below, we will discuss the particular version of gradient elasticity as developed by Wang and Lam with its finite element implementation. Wang et al. [13] developed a version of gradient elasticity whereby the additional contributions are cast in terms of rotation gradients and the conjugated couple stresses . They have also argued how the solutions of gradient elasticity can be retrieved from the solutions of classical elasticity, see [1] and the follow-up study in [14]. We will discuss their work, in particular, the relation between the solutions of classical elasticity and gradient elasticity. We will also outline amendments that would allow this theory to be implemented via the methodology of Ru and Aifantis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nonlocal and gradient elasticity in micro/nano structures · Numerical methods in engineering · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Wang J, Lam DCC (2009) J Mater Sci 44:985. doi: https://doi.org/10.1007/s10853-008-3219-410.1007/s10853-008-3219-4 ↗
2. Altan SB, Aifantis EC (1992) Scr Metall Mater 26:31910.1016/0956-716X(92)90194-J ↗
3. Ru CQ, Aifantis EC (1993) Acta Mech 101:5910.1007/BF01175597 ↗
4. Askes H, Morata I, Aifantis EC (2008) Comput Struct 86:126610.1016/j.compstruc.2007.11.002 ↗
5. Askes H, Gitman IM (2009) Int J Fract 156:21710.1007/s10704-009-9357-0 ↗
6. Gutkin MY, Aifantis EC (1999) Scr Mater 40:55910.1016/S1359-6462(98)00424-2 ↗
7. Aifantis EC (2003) Mech Mater 35:25910.1016/S0167-6636(02)00278-8 ↗
8. Lazar M, Maugin GA, Aifantis EC (2005) Phys Status Solidi B 242:236510.1002/pssb.200540078 ↗
9. Aifantis EC (1999) Int J Fract 95:29910.1023/A:1018625006804 ↗
10. Askes H, Aifantis EC (2002) Int J Fract 117:34710.1023/A:1022225526483 ↗
11. Aifantis EC (2009) Int J Eng Sci 47:108910.1016/j.ijengsci.2009.07.003 ↗
12. Tenek LT, Aifantis EC (2002) Comput Model Eng Sci 3:731
13. Lam DCC, Yang F, Chong ACM, Wang J, Tong P (2003) J Mech Phys Solids Solids 51:147710.1016/S0022-5096(03)00053-X ↗
14. Wang J, Lam DCC (2010) Comput Mater Contin 17:215
15. Zervos A (2008) Int J Numer Method Eng 73:56410.1002/nme.2093 ↗
16. Askes H, Aifantis EC (2011) Int J Solids Struct 48:196210.1016/j.ijsolstr.2011.03.006 ↗