journal article·2012-05

Prestressed double network thermoset: preparation and characterization

Zhan H. Yang, Andrew T. Detwiler, Alan J. Lesser

Journal of Materials Science· Volume 47· Issue 10
Publisher page

Abstract

An innovative scheme to prepare Prestressed double network (PDN) epoxies is presented using a judicious combination of tetrafunctional curatives that have similar molecular weights but different reaction kinetics. A diglycidyl ether of bisphenol A epoxy monomer was reacted stoichiometrically and sequentially with various molar ratios of an aliphatic polyetheramine curing agent and an aromatic curing agent. Deformation was imposed on the partially cured resins after the formation of the first network, and postcuring was conducted at 50% compressive strain. Physical properties of the resulting PDN epoxies were examined using thermomechanical analysis, dynamic mechanical analysis, uniaxial tensile test, and plane-strain fracture toughness test. The application of prestress resulted in no changes in glass transition temperature, coefficient of linear thermal expansion, and Young’s modulus. However, a marked increase in fracture toughness is observed, accompanied by strong birefringence and visible roughness on the fracture surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Polymer composites and self-healing · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Lipatov YS, Alekseeva TT (2007) Adv Polym Sci 208:1. doi: 10.1007/12_2007_11610.1007/12_2007_116 ↗
2. Sperling LH, Mishra V (1996) Polym Adv Technol 7(4):19710.1002/(SICI)1099-1581(199604)7:4<197::AID-PAT514>3.0.CO;2-4 ↗
3. Gong JP, Katsuyama Y, Kurokawa T, Osada Y (2003) Adv Mater (Weinheim, Ger) 15(14):1155. doi: 10.1002/adma.20030490710.1002/adma.200304907 ↗
4. Huang M, Furukawa H, Tanaka Y, Nakajima T, Osada Y, Gong JP (2007) Macromolecules 40(18):6658. doi: 10.1021/ma062482q10.1021/ma062482q ↗
5. Tanaka Y (2007) EPL 78(5). doi: 10.1209/0295-5075/78/5600510.1209/0295-5075/78/56005 ↗
6. Andrews RD, Tobolsky AV, Hanson EE (1946) J Appl Phys 17(5):35210.1063/1.1707724 ↗
7. Flory PJ (1960) Trans Faraday Soc 56(5):72210.1039/tf9605600722 ↗
8. Santangelo PG, Roland CM (1994) Rubber Chem Technol 67(2):35910.5254/1.3538681 ↗
9. Meissner B, Matjka L (2003) Polymer 44(16):4611. doi: 10.1016/S0032-3861(03)00412-910.1016/S0032-3861(03)00412-9 ↗
10. Kaang S, Gong D, Nah C (1997) J Appl Polym Sci 65(5):91710.1002/(SICI)1097-4628(19970801)65:5<917::AID-APP9>3.0.CO;2-Q ↗
11. Aprem AS, Joseph K, Thomas S (2004) J Appl Polym Sci 91(2):1068. doi: 10.1002/app.1322010.1002/app.13220 ↗
12. Singh NK, Lesser AJ (2010) J Polym Sci Part B: Polym Phys 48(7):778. doi: 10.1002/polb.2194310.1002/polb.21943 ↗
13. Singh NK, Lesser AJ (2011) Macromolecules 44(6):1480. doi: 10.1021/ma102805410.1021/ma1028054 ↗
14. Detwiler AT, Lesser AJ (2012) J Mater Sci 47(8):3493. doi: 10.1007/s10853-011-6182-410.1007/s10853-011-6182-4 ↗
15. ASTM (1999) In: ASTM D5045-99. ASTM international, West Conshohocken. doi: 10.1520/D5045-9910.1520/D5045-99 ↗
16. Lesser AJ, Crawford E (1997) J Appl Polym Sci 66(2):38710.1002/(SICI)1097-4628(19971010)66:2<387::AID-APP19>3.0.CO;2-V ↗
17. Shaw MT, MacKnight WJ (2005) Introduction to polymer viscoelasticity, 3rd edn. Wiley, Hoboken. doi: 10.1002/047174183310.1002/0471741833 ↗
18. Oleynik E (1989) Prog Colloid Polym Sci 80:140. doi: 10.1007/BFb011542510.1007/BFb0115425 ↗
19. Odian G (2004) In: Principles of polymerization. Wiley, Hoboken. doi: 10.1002/047147875X10.1002/047147875X ↗
20. Fox TG (1956) Bull Am Phys Soc 1:123
21. Eyring H (1936) J Chem Phys 4(4):28310.1063/1.1749836 ↗
22. Ogata M, Kinjo N, Kawata T (1993) J Appl Polym Sci 48(4):58310.1002/app.1993.070480403 ↗
23. Nielsen LE, Landel RF (1994) Mechanical properties of polymers and composites, 2nd edn. Marcel Dekker, New York
24. Heux L, Halary JL, Laupretre F, Monnerie L (1997) Polymer 38(8):176710.1016/S0032-3861(96)00694-5 ↗
25. Lee CYC, Jones WB (1982) Polym Eng Sci 22(18):119010.1002/pen.760221804 ↗
26. Yamini S, Young RJ (1977) Polymer 18(10):107510.1016/0032-3861(77)90016-7 ↗
27. Kinloch AJ, Shaw SJ, Tod DA, Hunston DL (1983) Polymer 24(10):134110.1016/0032-3861(83)90070-8 ↗
28. Archer JS, Lesser AJ (2009) J Appl Polym Sci 114(6):3704. doi: 10.1002/app.3044010.1002/app.30440 ↗
29. Weon JI, Creasy TS, Sue HJ, Hsieh AJ (2005) Polym Eng Sci 45(3):314. doi: 10.1002/pen.2026910.1002/pen.20269 ↗