journal article·2006-09

Sn–Sb–Se crystalline phases formed by melt-quenching technique

A. B. Adam, S. Sakrani, Y. Wahab

Journal of Materials Science· Volume 41· Issue 17
Publisher page

Abstract

Preperation of alloy percentages of Sn-Sb-Se(TAS) of shaking furnace and melt sealing evacuated quartz ampoule using melt quenching technique (MQT) was analyzed. XRD measurement was carried out to identify whether the prepared samples were amorphous or crystalline structure and to determine the boundary between the two states. SEM morphological studies revealed that increasing Sn and Sb mole % modify the microstructure of the ternary Sn-Sb-Se based systems. Under the same conditions of preparation and maintaining Sn mol% at 15, the dendrite shapes of crystals were enlarged when Sb mol% increased. The Sn occurred in ternary compositions and supports the theoretical argument which considered Sb-mol %=14.3 is the boundary line between the crystalline and crystalline phase is dominant in the region with Sb-mol% more than or equal to 15. MQT proved its ability in preparing alloy of Sn-Sb-Se in crystalline structure and there was no excessive loss of the materials during the preparation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase-change materials and chalcogenides · Chalcogenide Semiconductor Thin Films · Mineralogy and Gemology Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Elliott SR (1991) In: Zarzychi JW (ed) Glasses and amorphous materials, vol 9. New York, VCH
2. Hilton AR, Jones CE, Brau M (1966a) Phys Chem Glasses 7(4):105
3. Chelikowsky JR, Philips JC (1978) Phys Rev B 17(6):245310.1103/PhysRevB.17.2453 ↗
4. Zhenhua L (1991) J. Non-Cryst Solids 127:29810.1016/0022-3093(91)90482-L ↗
5. Fouad SS, Fayek SA, Ali MH (1998) Vacuum 49:2510.1016/S0042-207X(97)00122-X ↗
6. Philips JC (1979) J Non-Cryst Solids 34:15310.1016/0022-3093(79)90033-4 ↗
7. Lezal D (2003) J Optoelectron Adva Mater 5(1):23
8. Elliott SR (1990) Physics of amorphous materials. Longman Scientific & Technical Press, New York
9. Adam AB, Sakrani S, Wahab Y (2005) J Mat Sci 40(7):157110.1007/s10853-005-0655-2 ↗
10. Adam AB (2002) PhD-Thesis. University of Technology, Malaysia
11. Adam AB, Sakrani S, Wahab Y (2004) Physical Characterizations of Snx–Sb15–Se85-x Chalcogenide Glasses. Paper submitted on Dec.7, 2004, to be published in Journal of Materials Science
12. Adam AB, Sakrani S, Wahab Y (2002) J. Solid State Sci Tech 10(1&2):139
13. Wahab Y, Adam AB, Sakrani S (2002) J Solid State Sci Tech 10(1&2):60
14. Adam AB, Sakrani S, Wahab Y (2000) J. Solid State Sci Tech 8(1&2):42
15. Adam AB, Sakrani S, Wahab Y (1998) J Solid State Sci Tech 6(1):78
16. Sakrani S, Adam AB, Wahab Y (1997) J Solid State Sci Tech 5(1):1
17. Das GC, Platakis NS, Bever MB (1974) J Non-Cryst Solids 15:3010.1016/0022-3093(74)90109-4 ↗
18. Agnihotri AK, Kumar A, Nigam A (1988) J Non-Cryst Solids 101:12710.1016/0022-3093(88)90379-1 ↗
19. Kakinuma F, Fukunaga T, Misawa M, Susuki K (1992) J Non-Cryst Solids 150:5310.1016/0022-3093(92)90094-Z ↗
20. Mukherjee AK, Dhawan U, Kundra KD, Mondal M, Ali SZ (1982) Indian J Pure Appl Phys 20:681
21. Sreeram AN, Swiler DR, Varshneya AK (1991) J Non-Cryst Solids 127:28710.1016/0022-3093(91)90481-K ↗
22. Kislitskaya EA, Kokorina VF (1971) Translated from Zhurnal Prikladnoi Khimii 44(3):646
23. McNeil LE, Mikrut JM, Peters MJ (1987) Solid State Commun 62(2):10110.1016/0038-1098(87)91121-5 ↗