journal article·2011-06

Effect of deformation temperature on microstructure and mechanical behaviour of warm working vanadium microalloyed steels

C. García-Mateo, B. López, J. M. Rodriguez-Ibabe

Journal of Materials Science· Volume 46· Issue 11
Publisher page

Abstract

Plane strain compression tests of two V microalloyed steels and one plain C-Mn steel have been done to analyse the influence of the deformation temperature, in the warm working range, on the final microstructure and subsequent mechanical behaviour. In the case of V microalloyed steels, the reheating temperature has an effect on the amount of vanadium in solution prior to deformation. This factor influences the austenite evolution during warm deformation and the transformation during cooling. As a consequence, in the microalloyed steels complex multiphase microstructures are obtained that lead to a wide range of strength-toughness combinations. In contrast, in the case of the plain C-Mn steel minor effects are observed in the deformation range from 800 to 870 °C. © 2011 Springer Science+Business Media, LLC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Fatemi A, Zoroufi M (2002) Fatigue performance evaluation of forged versus competing process technologies: a comparative study. 24th Forging industry technical conference, Cleveland, Ohio
2. Ghosh SK, Haldar A, Chattopadhyay PP (2009) J Mater Sci 44:580. doi: 10.1007/s10853-008-3051-x10.1007/s10853-008-3051-x ↗
3. Tonshoff HK (1982) VDI-Z Integrierte Produktion 124:841
4. Behrens BA, Suchmann P, Schott A (2008) Prod Eng 2:26110.1007/s11740-008-0114-4 ↗
5. Reynolds JH, Naylor DJ (1998) Mater Sci Technol 4:58610.1179/mst.1988.4.7.586 ↗
6. Sheljaskov S (1994) J Mater Proc Technol 46:310.1016/0924-0136(94)90099-X ↗
7. Sekiguchi H, Kobatake K, Tokizane M, Osakada K (1988) Development of new thermo-mechanical treatment in warm forging of carbon steel. International conference on physical metallurgy of thermo-mechanical processing of steels and other metals. The Iron and Steel Institute, Japan, p 856
8. Xinbo L, Fubao Z, Jianhua F, Zhiliang Z (2002) J Mater Proc Technol 122:3810.1016/S0924-0136(02)00031-6 ↗
9. Yan H, Li Z, Zhang Z (2006) J Zhejiang Univ Sci A 7:145310.1631/jzus.2006.A1453 ↗
10. Zhao P, Boyd JD (2007) Mater Sci Technol 23:118610.1179/174328407X213288 ↗
11. Xu YB, Yu YM, Xiao BL, Liu ZY, Wang GD (2010) J Mater Sci 45:2580. doi: 10.1007/s10853-010-4229-610.1007/s10853-010-4229-6 ↗
12. Korchynsky M, Paules JR (1989) Microalloyed forging steels. A state of the art review, SAE technical papers, no. 890801
13. Adamczyk J, Kalinowska-Ozgowicz E, Ozgowicz W, Wusatowski R (1995) J Mater Proc Technol 53:2310.1016/0924-0136(95)01958-H ↗
14. Garcia-Mateo C, Lopez B, Rodriguez-Ibabe JM (2001) Mater Sci Eng A 303:21610.1016/S0921-5093(00)01940-7 ↗
15. ASTM E 23-1992. Test methods for notched bar impact testing of metallic materials
16. MTDATA (2004) Phase diagram calculation software. National Physical Laboratory, Teddington, UK
17. Elwazzri AM, Wanjara P, Yue S (2006) ISIJ Int 46:135410.2355/isijinternational.46.1354 ↗
18. Rivas AL, Michal GM, Burnett ME, Musolff CF (1996) In: Van Tyne J, Krauss G, Matlock DK (eds) Microalloyed bar and forging steels. TMS, p 159
19. Aldazabal J, Garcia-Mateo C (2005) Mater Sci Forum 500–501:71910.4028/www.scientific.net/MSF.500-501.719 ↗
20. Aldazabal J, Garcia-Mateo C, Capdevila C (2006) Mater Trans JIM 47:273210.2320/matertrans.47.2732 ↗
21. Wagner C (1961) Z Electrochemie 65:581
22. Xu YB, Yu YM, Xiao BL, Liu ZY, Wang GD (2009) J Mater Sci 44:3928. doi: 10.1007/s10853-009-3526-410.1007/s10853-009-3526-4 ↗
23. Bengochea R, Lopez B, Gutierrez I (1999) ISIJ Int 39:58310.2355/isijinternational.39.583 ↗
24. Jorge-Badiola D, Iza-Mendia A, Rodriguez-Ibabe JM, Lopez B (2010) ISIJ Int 50:54610.2355/isijinternational.50.546 ↗
25. Medina SF, Mancilla JE (1996) ISIJ Int 36:106310.2355/isijinternational.36.1063 ↗
26. Atlas of Continuous Cooling Transformation Diagrams for Vanadium steels by Vanitec, KENT, UK, p 25, 1985
27. Staiger MP, Jessop B, Hodgson PD, Brownrigg A, Davies CHJ (1999) ISIJ Int 39:18310.2355/isijinternational.39.183 ↗
28. Gladman T (1997) The physical metallurgy of microalloyed steels. The Institute of Materials, London, UK
29. Wang HR, Wang W (2009) J Mater Sci 44:591. doi: 10.1007/s10853-008-3069-010.1007/s10853-008-3069-0 ↗
30. Misaka Y, Yoshimoto T (1967) J Jpn Soc Technol Plast 8:414
31. Kirihata A, Siciliano F, Maccagno TM, Jonas JJ (1998) ISIJ Int 38:18710.2355/isijinternational.38.187 ↗
32. Dutta B, Valdes E, Sellars CM (1992) Acta Metall Mater 40:65310.1016/0956-7151(92)90006-Z ↗
33. Parker SV, Wadsworth JEJ, Gutierrez I, Rodriguez R, Vandenberghe L, Lotter U (2003) Property models for mixed microstructures. Technical Steel Research, EUR 20880
34. Gladman T, McIvor ID, Pickering FB (1972) J Iron Steel Inst 210:916
35. Garcia-Mateo C, Romero JL, Rodriguez-Ibabe JM (1999) Microstructure and mechanical behaviour of warm forged V microalloyed steels. 41st Mechanical working and steel processing conference, vol XXXVII. Iron and Steel Society, p 653
36. Amer AE, Koo MY, Lee KH, Kim SH, Hong SH (2010) J Mater Sci 45:1248. doi: 10.1007/s10853-009-4074-710.1007/s10853-009-4074-7 ↗
37. Lu SP, Wei ST, Li DZ, Li Y (2010) J Mater Sci 45:2390. doi: 10.1007/s10853-010-4205-110.1007/s10853-010-4205-1 ↗
38. Mintz B (1997) Metall Mater Trans 28A:207310.1007/s11661-997-0164-9 ↗
39. Ollilainen V, Kasprzak W, Holappa L (2003) J Mater Proc Technol 134:40510.1016/S0924-0136(02)01131-7 ↗