Damage evaluation of refractories under cyclic loading–unloading processes using ultrasonic method
Source abstract
Abstract
Accumulation of damage by cyclic loading–unloading under uni-axial compressive stress was evaluated using ultrasonic method for two kinds of refractories: alumina/graphite (AG) and isotropic graphite (IG) refractories. Change of relative degradation in apparent sonic velocity VRD was used for a barometer on damage evaluation of IG and AG refractories. Measurement of change in VRD actualizes in-situ evaluation of damage during loading–unloading processes. Difference of change in VRD during loading–unloading processes was observed between both specimens, which suggested the damage mechanism is different in IG and AG. Accumulation of damage for AG specimens by cyclic loading–unloading was very little, while it is a little larger for IG specimens. An increase in applied stress ratio R contributed to an increase in degree of damage accumulation. To explain the damage mechanism for both AG and IG specimens, we consider damage models, respectively. In these models, loading–unloading processes were classified into 4 steps based on the behavior of change in VRD, and damage of the two kinds of specimens was explained by relating to crack nucleation and crack opening-closing mechanism in each step.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Lee WJ, Case ED (1989) Mater Sci Eng A119:113
2. Lee WJ, Case ED (1990) J Mater Sci 25:504310.1007/BF00580128 ↗
3. Kim Y et al (1990) The minerals, metals and materials society, p 479
4. Kim Y et al (1990) Proceedings of the American society for composites, 5th technical conference, p 871
5. Schmitt N et al (2002) Mech Mater 34:72510.1016/S0167-6636(02)00156-4 ↗
6. Manson SS (1979) ICM 3, Cambridge 1:1310.1080/02590123.1979.11964170 ↗
7. Dyson VD, McLean D (1977) Met Sci 2:3710.1179/msc.1977.11.2.37 ↗
8. Jonas JJ, Baudelet B (1977) Acta Metallur 25:4310.1016/0001-6160(77)90244-9 ↗
9. Bui-Quoc T et al (1971) J Basic Engng Trans ASME, p 69110.1115/1.3425328 ↗
10. Sidoroff F (1975) Arch Mech Poland 27(5–7):807
11. Germain P et al (1983) ASME J Appl Mech 50:101010.1115/1.3167184 ↗
12. El Bouazzaoui R, Baste S, Camus C (1996) Comp Sci Technol 56:137310.1016/S0266-3538(96)90008-1 ↗
13. Yoshida F et al (2002) Int J Plasticity 18:66110.1016/S0749-6419(01)00050-X ↗