journal article·2011-12

Urea effect on the mechanism of mullite crystallization

L. S. Cividanes, D. D. Brunelli, C. A. Bertran, T. M. B. Campos, G. P. Thim

Journal of Materials Science· Volume 46· Issue 23
Publisher page

Abstract

Mullite is an excellent structural material due to its physical and mechanical properties. In this study, mullite was obtained by the sol–gel process, using silicic acid, aluminum nitrate, and urea. The urea effect was studied by evaluating samples obtained from urea/Al3+ ratio equal to 0, 1, and 3. The kinetic study was conducted using the isoconversional, non-isothermal, Flynn–Wall–Ozawa method. The sample prepared without urea, which is the least homogeneous one, formed spinel and α-alumina at 1150 °C, and Al-poor mullite together with α-alumina, at 1200 °C. The Al-poor mullite crystallization process from this sample showed the lowest yield. The sample prepared with urea/Al3+ ratio equal to 1, which has an intermediate behavior, formed spinel at 1100 °C, Al-poor mullite at 1150 °C, and α-alumina together with Al-poor mullite at 1250 °C. However, the sample prepared with urea/Al3+ ratio equal to 3, the most homogeneous, formed spinel and Al-rich mullite at 1100 °C. This sample formed Al-poor mullite at 1200 °C with the highest yield. Moreover, the sample synthesized without urea showed a higher porosity and a greater amount of hexacoordinated aluminum at 350 °C. All samples showed the same kinetic model, Sestak and Berggren (SB) for Al-poor mullite crystallization. The samples synthesized with urea crystallized mullite through the same kinetic parameters and constant values of the activation energy, but the sample prepared without urea followed different kinetic parameters and values of activation energy which changed over the course of the crystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Energetic Materials and Combustion · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Pascual JZ, Jiménez de Haro MC, Varona I, Justo A, Pérez-Rodríguez JL, Sánchez-Soto PJ (2000) J Mater Chem 10:140910.1039/a909380j ↗
2. Gerardin C (1994) Chem Mat 6:16010.1021/cm00038a011 ↗
3. Sola ER, Serrano FJ, Torres FJ, Reventós MM, Esteve VJ, Kojdecki MA, Amigó JM, Alarcón J (2006) Cryst Res Technol 41:103610.1002/crat.200610717 ↗
4. Fielitz P, Borchardt G, Schneider H, Schmucker M, Wiedenbeck M, Rhede D (2001) J Eur Ceram Soc 21:257710.1016/S0955-2219(01)00276-X ↗
5. Li DX, Thomson WJ (1991) J Am Ceram Soc 74:238210.1111/j.1151-2916.1991.tb06772.x ↗
6. Pask JA (1996) J Eur Ceram Soc 16:10110.1016/0955-2219(95)00147-6 ↗
7. Huling JC, Messing GL (1991) J Am Ceram Soc 74:237410.1111/j.1151-2916.1991.tb06771.x ↗
8. Chakraborty AK (2008) J Mater Sci 43:5313. doi: 10.1007/s10853-008-2775-y10.1007/s10853-008-2775-y ↗
9. Jaymes I et al (1996) J Mater Sci 31:4581. doi: 10.1007/BF0036635510.1007/BF00366355 ↗
10. Chakraborty AK (2008) J Mater Sci 43:5376. doi: 10.1007/s10853-008-2780-110.1007/s10853-008-2780-1 ↗
11. Niederberger M, Garnweitner G (1996) Chem-Eur J 12:728210.1002/chem.200600313 ↗
12. Hubert-Pfalzraf LG (1998) Coordin Chem Rev 178:96710.1016/S0010-8545(98)00080-0 ↗
13. Schubert U (2005) J Mater Chem 15:370110.1039/b504269k ↗
14. Mizukami F, Maeda K, Toba M, Sano T, Niwa S-I, Miyazaki M, Kojima K (1997) J Sol-Gel Sci Tech 8:101
15. Stefanescu M, Stoia M, Stefanescu O (2007) J Sol-Gel Sci Tech 41:7110.1007/s10971-006-0118-5 ↗
16. Bertran CA, Silva NT, Thim GP (2000) J Non-Cryst Solids 273:14010.1016/S0022-3093(00)00157-5 ↗
17. Campos TMB, Cividanes LS, Garcia RBR, Kawachi EY, Thim GP (2008) Efeito do tratamento térmico e do ácido cítrico na cristalização da mulita. In: Proceedings of the 63° Congresso Anual da ABM, Santos, July 28–Aug 110.5151/2594-5327-0104 ↗
18. Jaymes I, Douy A (1996) J Eur Ceram Soc 16:15510.1016/0955-2219(95)00138-7 ↗
19. Thim GP, Bertran CA, Barlette VE, Macêdo MIF, Oliveira MAS (2001) J Eur Ceram Soc 21:75910.1016/S0955-2219(00)00260-0 ↗
20. Cividanes LS, Campos TMB, Bertran CA, Thim GP (2010) J Non-Cryst Solids (Crystallization 2009) 356:301310.1016/j.jnoncrysol.2010.05.076 ↗
21. Vyazovkin S, Wight CA (1997) Annu Rev of Phys Chem 48:12510.1146/annurev.physchem.48.1.125 ↗
22. Schneider H, Komarneni S (2005) Mullite. Wiley-VCH, Weinheim10.1002/3527607358 ↗
23. Leivo J et al (2008) J Eur Ceram Soc 28:174910.1016/j.jeurceramsoc.2007.12.033 ↗
24. Ban T, Hayashi S, Yasumori A, Okada K (1996) J Eur Ceram Soc 16:12710.1016/0955-2219(95)00131-X ↗
25. Chakraborty AK (2005) Termochim Acta 427:10910.1016/j.tca.2004.09.021 ↗
26. Hatakeyama T, Quinn FX (1994) Thermal analysis: fundamentals and applications to polymer science. John Wiley & Sons, New York
27. López-Fonseca R et al (2005) J Therm Anal Calorim 80:6510.1007/s10973-005-0614-9 ↗
28. Khawam A, Flanagan DR (2005) Thermochim Acta 436:10110.1016/j.tca.2005.05.015 ↗
29. Azimi HR (2008) Thermochim Acta 474:7210.1016/j.tca.2008.05.009 ↗
30. Tan H, Ding Y, Yang J (2010) J Alloys Compd 492:39610.1016/j.jallcom.2009.11.118 ↗
31. Wei P, Rongti L (1999) J Mater Sci Eng A271:29810.1016/S0921-5093(99)00442-6 ↗
32. Campos AL, Silva NT, Melo FCL, Oliveira MAS, Thim GP (2002) J Non-Cryst Solids 304:1910.1016/S0022-3093(02)00998-5 ↗
33. Oliveira TC, Ribeiro CA, Brunelli DD, Rodrigues LA, Thim GP (2010) J Non Cryst Solids (Crystallization 2009) 356:298010.1016/j.jnoncrysol.2010.05.078 ↗
34. Malek J (2000) Termochim Acta 355:23910.1016/S0040-6031(00)00449-4 ↗
35. Málek J et al (1992) J Therm Anal 38:7110.1007/BF02109109 ↗
36. Koga N, Malek J (1996) Thermochim Acta 282–283:6910.1016/0040-6031(96)02822-5 ↗