Effect of microstructure on the fatigue behavior of aluminum titanate ceramics
Source abstract
Abstract
The effect of microstructures, such as grain size and internal pores, on the fatigue behavior of aluminum titanate (AT, Al2TiO5) ceramics was investigated at room temperature and 973 K. When the average grain size of the AT ceramics was decreased from 22 to 13 μm, the flexural strength was approximately doubled at both temperatures. The decrease in the grain size is considered to reduce the size and amount of microcracks present at the grain boundaries. Fatigue deterioration of the ceramics was accelerated by applying cyclic stress. The cyclic fatigue behavior of the ceramics with smaller grains suggested control by a “grain bridging degradation mechanism” at both temperatures. However, that of the ceramics with larger grains was governed by the fatigue mechanism, depending on the testing temperatures. There was little effect from internal pores on the cyclic fatigue behavior of the AT ceramics at room temperature. On the other hand, at 973 K, the lifetime of the cyclic fatigue was decreased due to the presence of pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Kitaoka S (2003) Ceramics 38:283
2. Thomas HAJ, Stevens R (1987) Brit Ceram Trans J 88:144
3. Morosin B, Lynch RW (1972) Acta Cryst B28:104010.1107/S0567740872003681 ↗
4. Ohya Y, Nakagawa Z, Hamano K (1987) J Am Ceram Soc 70:C18410.1111/j.1151-2916.1987.tb05720.x ↗
5. Ohya Y, Nakagawa Z (1996) J Mater Sci 31:1555. doi: https://doi.org/10.1007/BF0035786410.1007/BF00357864 ↗
6. Jin G, Honjoh A, Awaji H (2000) J Ceram Soc Jpn 108:61410.2109/jcersj.108.1258_614 ↗
7. Matsudaira T, Kitaoka S, Kuzushima Y, Awaji H, Igimi D (2004) J Soc Mat Sci 53:60710.2472/jsms.53.607 ↗
8. Matsudaira T, Kuzushima Y, Kitaoka S, Awaji H, Yokoe D (2004) J Ceram Soc Jpn 112:S327 (Suppl, 112–1, PacRim5 Special Issue)
9. Japan Industrial Standard (1997) Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method. JIS R 1611, UDC 666.59:536.2, Japan Standards Association, Tokyo, Japan
10. Japan Industrial Standard (1989) Testing methods for elastic modulus of high performance ceramics at elevated temperatures. JIS R 1605, UDC 666.59:620.173.22, Japan Standards Association, Tokyo, Japan
11. Awaji H (2001) Strength of ceramic materials (Serammiku-Zairyokyodogaku). Corona Publishers Co. Ltd, Tokyo, Japan, p 71
12. Awaji H, Choi S-M, Jayaseelan DD (2001) J Ceram Soc Jpn 109:59110.2109/jcersj.109.1271_591 ↗
13. Newman JC Jr, Raju IS (1981) Eng Fract Mech 15:18510.1016/0013-7944(81)90116-8 ↗
14. Grathwohl G (1988) Mat wiss Werkstofftech 19:11310.1002/mawe.19880190402 ↗