Growth temperature dependence of strain in a GaN epilayer, grown on a c-plane sapphire substrate
Source abstract
Abstract
Despite the large mismatch in the lattice constants and thermal-expansion coefficients between the epilayer and the sapphire substrate, GaN epilayer is commonly grown on a c-plane sapphire substrate due to the lack of other suitable substrates [1–3]. The GaN epilayer on a c-plane sapphire substrate is widely grown with the use of the twostep metalorganic chemical vapor deposition (MOCVD), employing an AlN [4] or a low-temperature GaN buffer layer [5]. It was reported that a biaxial strain and a hydrostatic strain could coexist in the GaN epilayer [6, 7]. In GaN, the biaxial stress is due to thermal mismatch stress and growth [6–10]. The growth stress can be caused by lattice mismatch, island coalescence, grain growth, or surface stress [8–10]. Some in-situ measurements on the growth stress have been reported during MOCVD of GaN [8–10]. The internal hydrostatic strain was shown to have been introduced by the presence of point defects, which can be compressive or expansive depending on their size [6, 7]. A study was reported on a high-resolution X-ray diffraction (HRXRD) strain–stress analysis of a GaN/sapphire heterostructure grown through molecular beam epitaxy (MBE), particularly in the deformation state, depending on the relative content of N in the Ga1-xNx buffer layer by Harutyunyan et al. [11]. In the authors previous study [12], the strain analysis of a GaN epilayer with different growth times on a c-plane sapphire substrate via a two-step growth, using low-pressure, metalorganic chemical vapor deposition was conducted on the basis of precise measurement of the lattice parameters, using HRXRD. In this continuing study, the growth temperature dependence of the residual strain in a GaN epilayer at room temperature on a c-plane sapphire was studied. The final growth temperature in a fixed two-step MOCVD was varied from 850 to 1,050 C. The cand a-lattice parameters were measured using HRXRD, followed by the out-of-plane and in-plane strains. We have extracted the levels of biaxial and hydrostatic components of strain in the GaN films on sapphire. An undoped GaN epilayer was grown on a c-plane sapphire substrate in a horizontal MOCVD reactor at a low pressure of 300 Torr, as described in the authors’ previous articles [12, 13]. We employed a two-step growth method of GaN—consisting of the deposition of the low-temperature GaN buffer layer and high-temperature GaN epitaxial growth. The growth temperature of the high-temperature GaN was varied from 850 to 1,050 C so that the temperature dependence of the strain of the GaN epilayer induced after the two-step MOCVD growth process could be studied. The V/III ratios were 2,740 and 1,370 for buffer growth and the main high-temperature growth, respectively [12]. The growth rate was fixed at 0.07 lm/min; as such, the thickness of the GaN layer that was grown for 20 min was estimated to be 1.5 lm. The c-lattice and a-lattice parameters of the GaN epilayers were measured with a x-2h scan of the wurtzite GaN epilayer through triple-axis, HRXRD, to obtain precise measurements (PANalytical X’Pert PRO MRD), as described in the authors’ previous article [12]. S. I. Cho K. Chang Department of Chemical Engineering, University of Seoul, 90 Jeonnong-dong, Dongdaemun-gu, Seoul 130-743, South Korea
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor Quantum Structures and Devices · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Pankove JI, Moustakas TD (1998) Gallium Nitride (GaN) I. Academic Press, San Diego, p 20
2. Gil B (1998) Group III nitride semiconductor compounds. Oxford University Press Inc., p 70
3. Edgar JH, Strite S, Akasaki I, Amano H, Wetzel C (1999) Properties, processing and applications of gallium nitride and related semiconductors. INSPEC, London, p 381
4. Amano H, Sawaki N, Akasaki I, Toyoda Y (1986) Appl Phys Lett 48:35310.1063/1.96549 ↗
5. Nakamura S (1991) Jpn J Appl Phys 30:L170510.1143/JJAP.30.L1705 ↗
6. Kisielowski C, Kruger J, Ruvimov S, Suski T, Ager JW, Jones E, Liliental-Weber Z, Rubin M, Weber ER, Bremser MD, Davis RF (1996) Phys Rev B 54:1774510.1103/PhysRevB.54.17745 ↗
7. Kisielowski C (1999) Semicon Semimet 57:27510.1016/S0080-8784(08)62620-4 ↗
8. Hearne S, Chason E, Han J, Floro JA, Figiel J, Hunter J, Amano H, Tsong IST (1999) Appl Phys Lett 74:35610.1063/1.123070 ↗
9. Raghavan S, Acord J, Redwing JM (2005) Appl Phys Lett 86:26190710.1063/1.1968436 ↗
10. Bottcher T, Einfeldt S, Figge S, Chierchia R, Heinke H, Hommel D, Speck JS (2001) Appl Phys Lett 78:197610.1063/1.1359780 ↗
11. Harutyunyan VS, Aivazyan AP, Weber ER, Kim Y, Park Y, Subramanya SG (2001) J Phys D: Appl Phys 34:A3510.1088/0022-3727/34/10A/308 ↗
12. Cho SI, Chang K, Kwon MS (2007) J Mat Sci 42:3569. doi: 10.1007/s10853-007-1562-510.1007/s10853-007-1562-5 ↗
13. Kwon MS, Cho SI (2004) J Cryst Growth 266:43510.1016/j.jcrysgro.2004.03.003 ↗
14. Leszczynski M, Teisseyre H, Suski T, Grzegory I, Bockowski M, Jun J, Pakula K, Baranowski JM, Foxon CT, Cheng TS (1996) Appl Phys Lett 69:7310.1063/1.118123 ↗
15. Jain SC, Willander M, Narayan J, Van Overstraeten R (2000) J Appl Phys 87:96510.1063/1.371971 ↗
16. Polian A, Grimsditch M, Grzegory J (1996) J Appl Phys 79:334310.1063/1.361236 ↗