Processing of Fe-Al-C-Ce alloys through air induction melting with flux cover (AIMFC) and electroslag remelting (ESR)
Source abstract
Abstract
The effect of process parameters on recovery of reactive element, cerium, during air induction melting with flux cover (AIMFC) and electroslag remelting (ESR) of Fe-10.5 wt% Al-0.8 wt% C-(0.1 and 0.3) wt% Ce alloys and also the effect of melting techniques on hot workability, structure and tensile properties (at room temperature and at 873 K) of Fe-10.5 wt% Al-0.8 wt% C-0.3 wt% Ce alloy have been investigated. Good recovery of cerium was obtained by AIMFC. While conventional fluxes were found to be unsatisfactory, modified flux containing CeO2 gave better recovery of cerium during ESR. The best recovery of cerium was achieved by using calcium as a deoxident during ESR. The combination of AIMFC and ESR yields a sound ingot of Fe-Al-C-Ce quaternary alloys free from gas and shrinkage porosity with very low oxygen, nitrogen and sulphur contents. Processing of AIMFC ingots through ESR has resulted in improved hot-workability. The ESR processed and hot-rolled alloy exhibited superior tensile elongation as compared to hot-rolled AIMFC alloy. This may be attributed to the comparatively sound, homogeneous and clean ingot, with a refined microstructure and fine uniform distribution of precipitates observed in hot-rolled ESR ingots.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. C. G. MCkamey, J. H. DEvan, P. E. Tortorelli and V. K. Sikka, J. Mater. Res. 6 (1991) 1779.10.1557/JMR.1991.1779 ↗
2. V. K. Sikka, S. Viswanathan and C. G. MCkamey, in “Structural Intermetallics,” edited by R. Darolia, J. J. Leeandowsky, C. T Liu, P. L. Martin, D. B. Miracle and M.V. Nathal (The Minerals, Metals and Materials Society, TMS, Warrendale, PA. 1993) p. 483.
3. U. Prakash, R. A. Buckley, H. Jones and C. M. Sellars, ISIJ Int. 31 (1993) 1113.10.2355/isijinternational.31.1113 ↗
4. N. S. Stoloff and C. T. Liu, Intermetallics 2 (1994) 75.10.1016/0966-9795(94)90001-9 ↗
5. C. G. MCkamey and J. A. Horton, Metallurgical Transactions A 20 (1989) 751.10.1007/BF02667592 ↗
6. C. G. MCkamey, P. J. Maziasz and J. W. Jones, J. Mater. Res. 7 (1992) 2089.10.1557/JMR.1992.2089 ↗
7. C. G. MCkamey and C. T. Liu, Scripta Metall 24 (1990) 2219.
8. P. Kratochvil, M. Karlik, P. Housild and M. Cicslor, Intermetallics 7 (1999) 847.10.1016/S0966-9795(98)00134-4 ↗
9. S. Yangsham, Y. Zhengiun, Z. Zhonghua and H. Haibo, Scripta Mater 33 (1995) 811.10.1016/0956-716X(95)00282-Z ↗
10. Sun Yangshan, Zhang Zhonghua, Xue Feng and Weng Kunzhong, J. Mater Sci. Lett. 15 (1996) 820.10.1007/BF00274617 ↗
11. R. G. Baligidad, U. Prakash and A. Radhakrishna, Mater. Sci. Eng. A 225 (1998) 162.10.1016/S0921-5093(97)00859-9 ↗
12. R. G. Baligidad, U. Prakash and A. Radhakrishna, Mater. Sci. Eng. 249 (1998) 97.10.1016/S0921-5093(98)00580-2 ↗
13. R. G. Baligidad, U. Prakash and A. Radhakrishna, Mater. Sci. Eng. 231 (1997) 205.10.1016/S0921-5093(97)00078-6 ↗
14. R. G. Baligidad, U. Prakash and A. Radhakrishna, Mater. Sci. Eng. 283 (2000) 217.10.1016/S0921-5093(99)00796-0 ↗
15. R. G. Baligidad, U. Prakash and A. Radhakrishna, Intermetallics 6 (1998) 765.10.1016/S0966-9795(98)00050-8 ↗
16. R. Sundar, R. G. Baligidad, Y. V. R. K. Prasad and D. H. Sastry, Mater. Sci. Eng. A 258 (1998) 219.10.1016/S0921-5093(98)00937-X ↗
17. R. G. Baligidad and A. Radhakrishna, Mater. Sci. Eng. 287 (2000) 17.10.1016/S0921-5093(00)00832-7 ↗
18. R. G. Baligidad, U. Prakash, A. Radhakrishna, V. Ramakrishna rao, P. K. Rao and N. B. Ballal, Scripta Mater. 36 (1997) 105.10.1016/S1359-6462(96)00340-5 ↗
19. V. K. Sikka, in Proc. First. Int. Conf. on Heat Resistant Materials, edited by K. Natesan and D. J. Tillack (Fontana, Wisconsin, USA. 1991) p. 141.
20. V. K. Sikka, in Proc. First. Int. Conf. on Heat Resistant Materials, edited by K. Natesan and D. J. Tillack, in “High Temperature Ordered Intermetallic Alloys IV,” edited by L. A. Johson, D. P. Pope and J. O. Steigler, MRS Symp. Proceedings, Vol. 213 (MRS, Pittsburgh, CA, 1991) p. 907.
21. I. Barin, “Thermochemical Data of Pure Substances” (VCH, Weinheim, Germany, 1993).
22. S. D. Sastry, Y. V. R. K. Prasad, P. K. Rohatgi and K. P. ABRAHAM, in Symposium on Electroslag and Other Special Refining Processes, Bombay, 1979.
23. M. M. Klyuer, L. A. Dedusher, V. V. Topolin, Y. G. Grebstov, B. I. and S. E. Volkov, “Special Electro Metallurgy,” Part I (Nauleova Dumka, Kiev, 1972) p. 47.
24. P. I. Iontaine and D. J. Palmer, Iron and Steel, June (1972) 286.
25. R. G. Baligidad and A. Radhakrishna, J. Mater. Sci. Lett., communicated.