journal article·2003-05

Titanium oxy-nitride films deposited on stainless steel by an ion beam assisted deposition technique

K. Yokota, K. Nakamura, T. Kasuya, S. Tamura, T. Sugimoto, K. Akamatsu, K. Nakao

Journal of Materials Science· Volume 38· Issue 9
Publisher page

Abstract

Surfaces of stainless steel SUS304 were coated with titanium oxy-nitride (TiON) films at temperatures of 400–770°C using an ion-beam assisted deposition technique constructed from an electron beam evaporator for Ti evaporation and a microwave ion source for ionizing nitrogen gas. The N ions were accelerated at energies of 0.5–2.0 keV. Most of the deposited TiON films consisted of (60–80)% TiN and (40–20)% TiO2, and the fraction of TiO2 increased with increasing substrate temperature. Hardness of the TiNO films varied in the range from 160 GPa to 260 GPa with increasing substrate temperature. The titanium oxy-nitride film could be deposited on stainless steel without a significant deterioration surface layer at 600°C. However, when TiNO films were deposited at temperatures higher than 700°C, the thickness of the TiNO films were significantly thinner and a thick layer containing nitride such as Cr2N, CrFe, Fe2N and Fe4N was formed in a near surface region of stainless steel because more nitrogen diffused into stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. N. Kumar, K. Pourrezaei, B. Lee and E. C. Douglas, Thin Solid Films 164 (1988) 417.10.1016/0040-6090(88)90171-X ↗
2. H. Joswig, A. Kohlhase and P. Hucher, ibid 175 (1989) 17.10.1016/0040-6090(89)90802-X ↗
3. J. P. Bucher, K. P. Ackermann and F. W. Buschor, ibid. 122 (1984) 63.10.1016/0040-6090(84)90379-1 ↗
4. J. S. Cho, S. W. Nam and P. Hucher, J. Mater. Sci. 17 (1982) 2495.10.1007/BF00543880 ↗
5. M. Komiya, Ion Nitriding and Ion Carborizing (eds.) “Materials Science Society of Japan, Surface Treatment in Materials” (Shokabo, Tokyo, 1966) p. 131.
6. E. Moll and H. Daxinger, US Patent no. 4,197,175 (April 8, 1980).
7. A. Matthews and D. G. Teer, Thin Solid Films 80 (1981) 41.10.1016/0040-6090(81)90204-2 ↗
8. W. D. Munz, Surf. Coat. Technol. 48 (1991) 81.10.1016/0257-8972(91)90130-O ↗
9. A. Matthews, K. Fancey, A. S. James and A. Leylaand, ibid 61 (1993) 121.10.1016/0257-8972(93)90213-8 ↗
10. J. Pelleg, L. Z. Zevin and S. Lungo, Thin Solid Films 197 (1991) 11.10.1016/0040-6090(91)90225-M ↗
11. O. Kubaschewski and C. B. Alcock, “Metallurgical Thermochemistry” (Pergamon, Oxford, 1979) Tables.
12. M. H. Kazemeini, A. A. Berezin and N. Fukahara, Thin Solid Films 372 (2000) 70.10.1016/S0040-6090(00)01048-8 ↗
13. Joint Committee for Powder Diffraction Standards, Powder Diffraction File (International Center for Diffraction Data, Park Lane).
14. L. R. Doolittle, Nucl. Instrum. Methods Phys. Res. B9 (1985) 344.10.1016/0168-583X(85)90762-1 ↗
15. M. H. Khrushchef and M. A. Babichev, Friction and Wear of Machine 9 (1987) 22.
16. V. G. Rivlin and G. V. Raynor, Int. Met. Rev. 25 (1987) 21.
17. Y. Ando, K. Ogata, H. Yamaki and S. Sakai, Nucl. Instr. and Meth. B39 (1989) 158.10.1016/0168-583X(89)90761-1 ↗
18. S. Veprek, Thin Solid Films 130 (1985) 135.10.1016/0040-6090(85)90303-7 ↗
19. J. E. Sundgren, ibid 128 (1985) 21.10.1016/0040-6090(85)90333-5 ↗
20. J. Pelleg, L. Z. Zevin and S. Lungo, ibid. 197 (1991) 117.10.1016/0040-6090(91)90225-M ↗
21. A. D. Baker and D. Betteridge, “Photoelectron Spectroscopy” (Pergamon, New York, 1972) Appendix 2.
22. W. Y. Yang, H. Iwakura, H. Yagi, T. Kuroda and S. Nakamura, Jpn. J. Appl. Phys. 23 (1984) 1560.10.1143/JJAP.23.1560 ↗
23. “Simadzu Data Handbook” (Simadzu, Kyouto, 1980) Table 1.
24. N. Yasumaru, J. Japan Inst. Metals 61 (1997) 424.10.2320/jinstmet1952.61.5_424 ↗
25. D. R. Lide, “Handbook of Chemistry and Physics,” 80th ed. (CRC, Boca Raton, 1999) 12.
26. Japan Institute of Metals, Data Book for Metals (Maruzen, Toukyo, 1987) p. 128.