journal article·2021-06

Dissolution and isothermal solidification behaviour of commercially pure titanium brazed using a pure nickel filler under TLPB conditions

Colin A. Tadgell, Stephen F. Corbin

Journal of Materials Science· Volume 56· Issue 17
Publisher page

Abstract

Transient liquid phase bonding of Ti using elemental Ni foils represents a potential low-cost manufacturing route to join aerospace components. To fully develop this technique, the dissolution behaviour and kinetics of isothermal solidification in Ti/Ni joints were determined in this study. During heating, Ti-Ni intermetallic compounds form at the solid/liquid interface, which slows down the dissolution of the Ni foil, while promoting diffusion of Ni into the Ti base metal. These two features limit the amount of liquid gap widening that occurs during initial heating such that it only reaches 55% of the theoretical maximum. Once at the braze temperature of 1050 °C, the rate of isothermal solidification becomes constant with the square root of braze time. The IS rate in the Ti-Ni joints was twice as high as that reported for Ti-Cu joints. Comparison of experimental IS rates with model predictions indicated excellent agreement and demonstrated that the difference in IS rate in Ti-Ni compared to Ti-Cu was largely due to a higher rate of diffusion of Ni in Ti compared to Cu in Ti. The actual time required to achieve isothermal solidification depended both on the amount of dissolution/gap widening and on the rate of IS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Lütjering G, Williams JC (2007) Titanium, 2nd edn. Springer-Verlag, Berlin Heidelberg, pp 6–10
2. Veiga C, Davim JP, Loureiro AJR (2012) Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci 32(2):133–148
3. Rahman AHME, Cavalli MN (2010) Strength and microstructure of diffusion bonded titanium using silver and copper interlayers. Mater Sci Eng A 527:5189–519310.1016/j.msea.2010.04.065 ↗
4. Jing Y, Su D, Yue X, Britton TB, Jiang J (2017) The development of high strength brazing technique for Ti-6Al-4V using TiZrCuNi amorphous filler. Mater Charact 131:526–53110.1016/j.matchar.2017.07.039 ↗
5. Wells RR (1976) Microstructural control of thin-film diffusion-brazed titanium. Weld J 55(1):20
6. Elrefaey A, Tillmann W (2009) Evaluation of transient liquid phase bonding between titanium and steel. Adv Eng Mater 11(7):556–56010.1002/adem.200900021 ↗
7. Chang CT, Yeh TY, Shiue RK, Chang CS (2011) Microstructural evolution of infrared brazed CP-Ti using Ti-Cu-Ni brazes. J Mater Sci Technol 27(2):131–13810.1016/S1005-0302(11)60038-8 ↗
8. Wu ZY, Yeh TY, Shiue RK, Chang CS (2010) The effect of substrate dissolution in brazing CP-Ti and Ti-15-3 using clad Ti–15Cu–15Ni filler. ISIJ Int 50(3):450–45410.2355/isijinternational.50.450 ↗
9. Onzawa T, Suzumura A, Ko MW (1990) Brazing of Titanium using low-melting-point ti-based filler metals. Weld J 69(12):S462–S467
10. Ganjeh E, Sarkhosh H (2013) Microstructural, mechanical and fractographical study of titanium-CP and Ti–6Al–4V similar brazing with Ti-based filler. Mater Sci Eng A 559:119–12910.1016/j.msea.2012.08.043 ↗
11. Yeh TY, Shiue RK, Chang CS (2013) Microstructural evolution of brazed CP-Ti using the clad Ti-20Zr-20Cu-20Ni Foil. Met. Mater Trans A 44A:9–1410.1007/s11661-012-1534-5 ↗
12. Lee SK, Lim SS, Shin YC, Choi HJ, Kim TB, Kim JB, Choi DK, Cho CD, Jung TK (2019) Brazing characteristics and bonding strength of pure Titanium joints brazed with low-melting Zr-17Ti-22Ni filler metal. J Nanosci Nanotechnol 19:1592–215910.1166/jnn.2019.16158 ↗
13. Deng Y, Sheng G, Wang F, Yuan X, An Q (2016) Microstructure evolution and mechanical properties of transient liquid phase bonded Ti–6Al–4V joint with copper interlayer. Mater Des 92:1–710.1016/j.matdes.2015.11.103 ↗
14. Song XG, Cao J, Chen HY, Wang HQ, Feng JC (2013) Contact reactive brazing of Ti53311S alloy using Cu foil as interlayer: interfacial microstructure and joining properties. Mater Des 46:895–90110.1016/j.matdes.2012.11.044 ↗
15. Elrefaey A, Wojarski L, Tillmann W (2012) Preliminary investigation on brazing performance of Ti/Ti and Ti/Steel joints using copper film deposited by PVD technique. J Mat Eng Perform 21(5):696–70010.1007/s11665-012-0121-7 ↗
16. Elrefaey A, Wojarski L, Janczak-Rusch J, Tillmann W (2013) Vacuum brazing titanium using thin nickel layer deposited by PVD technique. Mater Sci Eng, A 565:180–18610.1016/j.msea.2012.12.028 ↗
17. Tadgell CA, Corbin SF (2020) Determining the mechanisms of dissolution and isothermal solidification kinetics during transient liquid phase bonding of commercially pure titanium using a pure copper interlayer. Mater Today Commun. In press July 2020
18. Kundu S, Chatterjee S (2006) Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer. Mater Sci Eng A 425:107–11310.1016/j.msea.2006.03.034 ↗
19. Thirunavukarasu G, Kundu S, Mishra B, Chatterjee S (2014) Effect of bonding time on interfacial reaction and mechanical properties of diffusion-bonded joint between Ti-6Al-4V and 304 stainless steel using Nickel as an intermediate material. Met And Mater Trans A 45A:2078–209010.1007/s11661-013-2135-7 ↗
20. Handbook ASM (1992) Alloy Phase Diagrams. ASM International, Cleveland, p 319
21. Moreau ED, Corbin SF (2020) Initial Boron Uptake and Kinetics of Transient Liquid Phase Bonding in NI-based Superalloys. Mat Mater Trans A. Early Access March 2020
22. Murray D, Corbin SF (2017) Determining the Kinetics of Transient Liquid Phase Bonding (TLPB)of Inconel 625/BNi-2 couples using differential scanning calorimetry. J Mater Process Technol 248:92–10210.1016/j.jmatprotec.2017.05.013 ↗
23. Povoden-Karadeniz E, Cirstea DC, Lang P, Wojcik T, Kozeschnik E (2013) Thermodynamics of Ti–Ni shape memory alloys. Calphad 41:128–13910.1016/j.calphad.2013.02.004 ↗
24. Tadgell CA (2019) Examining the mechanisms and kinetics of transient liquid phase bonding of titanium alloys using copper and nickel filler metals, PhD Thesis, Dalhousie University
25. Tuah-Poku I, Dollar M, Massalski TB (1988) A study of the transient liquid phase bonding process applied to a Ag/Cu/Ag sandwich joint. Metall Trans A 19(3):675–68610.1007/BF02649282 ↗
26. Ikawa H, Nakao Y, Isai T (1979) Theoretical considerations on the metallurgical process in TLP bonding of nickel-base superalloys. Trans Jpn Weld Soc 10:25–29
27. Zhou Y, Gale WF, North TH (1995) Modelling of transient liquid phase bonding. Int Mater Rev 40:181–19610.1179/imr.1995.40.5.181 ↗
28. Arafin A, Medraj M, Turner DP, Bocher P (2007) Transient liquid phase bonding of Inconel 718 and Inconel 625 with BNi-2: modeling and experimental investigations. Mat Sci. Eng. A 447(1–2):125–13310.1016/j.msea.2006.10.045 ↗
29. Ojo OA, Richards NL, Chaturvedi MC (2004) Isothermal solidification during transient liquid phase bonding of Inconel 738 superalloy. Sci. Technol. Weld. Join. 9(6):532–54010.1179/174329304X8702 ↗
30. Kuntz M, Zhou Y, Corbin SF (2006) A study of transient liquid-phase bonding of Ag-Cu using differential scanning calorimetry. Metall Mater Trans A 37A(8):2493–250410.1007/BF02586222 ↗
31. Neumann G, Tuijn C (2008) Self Diffusion and Impurity Diffusion in Pure Metals: Handbook of Experimental Data. Pergamon, London
32. Zhang XP, Shi YW (2004) A dissolution model of base metal in liquid brazing filler metal during high temperature brazing. Scripta Mater 50:1003–100610.1016/j.scriptamat.2003.12.032 ↗