Effects of Gravitational orientation on the microstructural evolution of gas tungsten arc welds in an Al-4 wt% Cu alloy
Source abstract
Abstract
Gas tungsten arc (GTA) welds on Al-4 wt% Cu alloys were investigated to determine effects of gravitational orientation on the weld solidification behavior. A bead-on-plate welding was performed by varying the relation between the arc translation direction and gravity vector, e.g., parallel-up, parallel-down, and perpendicular orientations. A solidification rate (V S) was calculated from the measured grain orientation, and a thermal gradient (G L) was estimated from the observed weld pool shape following a linear relation. A primary dendrite spacing (λ1) decreased continuously from the s-l boundary to the weld pool surface regardless of the gravitational orientations. Larger λ1 for the parallel-up weld was observed near the boundary and surface than that of the perpendicular and parallel-down welds, which is believed to be associated with a smaller G L due to larger weld pool dimension and with different solidification morphology. A solidification morphology and orientation in the perpendicular and parallel-up welds was comparable with a loss of columnar directionality near the weld surface and a continuous grain orientation. However, the parallel-down weld exhibited more columnar structure near the surface, which might be associated with the larger G L and relatively mild convection flows. Outward convection flows in the parallel-down weld might be inhibited because of its reverse direction with respect to the gravity vector. This resulted in abnormal ‘S’ shape of the trailing s-l interface and the V S, which was receded toward the weld pool center. Based on these findings, significant influence of gravitational orientation resulted in the variation on the weld pool shape associated with convection flows, which in turn affected solidification orientation/morphology and the primary dendrite spacing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. K. Nogi, Y. Aoki, H. Fujii and K. Nakata, Acta Materialia 46(12) (1998) 4405.10.1016/S1359-6454(98)00084-6 ↗
2. J. S. Foley and C. M. Banas, ICALEO'87 (1987) 47.10.2307/3328862 ↗
3. B. E. Paton, Autom. Weld. 25(6) (1972) 1.
4. D. K. Aidun, J. J. Domey and G. Ahmadi, Welding Journal 79(6) (2000) 145s.
5. C. C. Battaile, R. N. Grugel, A. B. Hmelo and T. G. Wang, Metall. and Mater. Trans. A 25A April (1994) 865.10.1007/BF02665463 ↗
6. H. Yu, K. N. Tandon and J. R. Cahoon, Metall. Trans. 28A (1997) 1245.10.1007/s11661-997-0290-4 ↗
7. R. P. Liu, J. H. Zhao, X. Y. Zhang, D. W. He, L. L. Sun, Z. C. Qin, Y. F. Xu and W. K. Wang, J. Mater. Sci. 33 (1998) 2679.10.1023/A:1004330008444 ↗
8. K. N. Tandon, F. Saadat, M. C. Chaturvedi and J. R. Cahoon, Microgr. Sci. and Techn. VI(1) (1991) 19.
9. G. L. Workman and W. F. Kaukler, ICALEO'90 (1990) 430.10.2351/1.5058386 ↗
10. D. K. Aidun and J. P. Dean, Welding Journal 78(10) (1999) 349s.
11. M. C. Flemings, “Solidification Processing” (McGraw-Hill, New York, 1974).
12. W. Kurz and D. J. Fisher, “Fundamentals of Solidification” (Aedermannsdorf, Switzerland, Trans Tech Publications, 1992).
13. X. Lin, W. Huang, J. Feng, T. Li and Y. Zhou, Acta Mater. 47(11) (1999) 3271.10.1016/S1359-6454(99)00166-4 ↗
14. M. GÜndÜz and E. Cadirli, Mater. Sci. and Eng A 327 (2002) 167.10.1016/S0921-5093(01)01649-5 ↗
15. R. M. Sharp and A. Hellawell, J. Cryst Growth 11 (1971) 71.10.1016/0022-0248(71)90165-5 ↗
16. Y. Miyata, T. Suzuki and J. I. Uno, Metall. Trans. 16A (1985) 1799.10.1007/BF02670367 ↗
17. J. T. Mason, J. D. Verhoeven and R. Trivedi, J. Cryst. Growth 59(3) (1982) 516.10.1016/0022-0248(82)90372-4 ↗
18. J. D. Hunt, “Solidification and Casting of Metals” (The Metal Society, London, 1979) p. 3.
19. W. Kurz and D. J. Fisher, Acta Metall. 29 (1981) 11.10.1016/0001-6160(81)90082-1 ↗
20. R. Trivedi, Metall. Trans. 15A (1984) 977.10.1007/BF02644689 ↗
21. M. Rappaz, S. A. David, J. M. Vitek and L. A. Boatner, ibid. 20A(6) (1989) 1125.10.1007/BF02650147 ↗
22. W. Kurz, B. Giovanola and R. Trivedi, Acta Metall. 34 (1986) 823.10.1016/0001-6160(86)90056-8 ↗
23. M. Gremaud, M. Carrard and W. Kurz, Acta Metall et Mater. 38(12) (1990) 2587.10.1016/0956-7151(90)90271-H ↗
24. M. Zimmermann, M. Carrard and W. Kurz, Acta Metall. 37(12) (1989) 3305.10.1016/0001-6160(89)90203-4 ↗
25. J. A. Brooks, M. Li and N. C. Y. Yang, Inst. Mater. (1997) 184.
26. S. Lu, J. D. Hunt, P. Gilgien and W. Kurz, Acta Metall. et Mater. 42(5) (1994) 1653.10.1016/0956-7151(94)90375-1 ↗
27. N. Kang, T. A. Mahank, A. K. Kulkarni and J. Singh, Mater. and Manuf. Proc. 18(2) (2003) 169.10.1081/AMP-120018903 ↗
28. R. E. Mueller, PhD thesis, York University, North York, Ontario, 1994.
29. F. Miyasaka, T. Yokogawa, H. Nishikawa, T. Oji, Y. Hirata and T. Masutani, Weld. Inter. 13(7) (1999) 536.10.1080/09507119909447409 ↗
30. J. Domey, D. K. Aidun, G. Ahmadi, L. L. Regel and W. R. Wilcox, Weld. Journal 74(8) (1995) 263s.
31. T. Ganaha, B. P. Pearce and H. W. Kerr, Metall. Trans. A 11A(8) (1980) 1351.10.1007/BF02653489 ↗
32. S. Kou and D. K. Sun, ibid. 16A(2) (1985) 203.10.1007/BF02816047 ↗
33. L. S. Chao and J. A. Dantzig, in Proceedings of 10th National Congress on Applied Mechanics, Austin, TX, 1986, p. 249.
34. M. Gaumann and W. Kurz, “Mathematical Modelling of Weld Phenomena 4” (Institute of Materials, 1997) p. 125.
35. O. Grong, “Metallurgical Modelling of Welding,” 2nd ed. (The Institute of Materials, London, 1997) p. 251.
36. J. R. Clarke, D. C. Weckman and H. W. Kerr, International Conference onTrends inWelding Research, Pine Mountain, GA, 1998, p. 72.
37. T. Zacharia, A. H. Eraslan, D. K. Aidun and S. A. David, Metall. Trans. B 20B(10) (1989) 645.10.1007/BF02655921 ↗
38. J. Choi and J. Mazumder, J. Mater. Sci. 37(10) (2002) 2143.10.1023/A:1015258322780 ↗