journal article·2020-10

Multilayered epoxy composites by a macroscopic anisotropic design strategy with excellent thermal protection

Dong Liu, Jiapeng Li, Ping Zhang, Jia Shen, Lin Chen, Tao Wu, Mao Chen, Yeping Wu, Xiuli Zhao

Journal of Materials Science· Volume 55· Issue 30
Publisher page

Abstract

Controlling thermal anisotropy structure is important for emerging heat management applications such as thermal shield, thermal camouflage, and heat concentration. In this work, alternating stack epoxy composites (AECs) are prepared, inspired by the multilayer structure of an onion. Hexagonal boron nitride (h-BN) and expanded vermiculite (E-ver) are used as fillers in epoxy resin (Epon), taking as heat-dissipation layers and heat-insulation layers, respectively. Vertical heat isolation and local hotspot protection are endowed by the effective structural design. The temperature rise time of top surface is delayed by 404.2%, and the stabilized temperature is reduced by 10–15 °C (the bottom is heated to 120 °C); meanwhile, the whole composites are heated to 80 °C with good heat-dissipation performance, compared with those of homogeneous materials. There are two thermal phenomena synergistically in the anisotropy structure: excellent thermal protection when heating and good heat dissipation when cooling. Further, a thermal transfer mechanism of heat insulation and heat dissipation is analyzed based on numerical simulation and experiment. The multilayer epoxy composites are promising for the development of high-performance thermal products such as heat spreader, equipment cooling, and thermal hose.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Polymer Nanocomposites and Properties · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Ma QL, Wang JX, Dong XT, Yu WS, Liu GX (2015) Flexible Janus nanoribbons array: a new strategy to achieve excellent electrically conductive anisotropy, magnetism, and photoluminescence. Adv Funct Mater 25(16):2436–244310.1002/adfm.201500348 ↗
2. Tawfick S, De Volder M, Copic D, Park SJ, Oliver CR, Polsen ES et al (2012) Engineering of micro- and nanostructured surfaces with anisotropic geometries and properties. Adv Mater 24(13):1628–167410.1002/adma.201103796 ↗
3. Wan JY, Song JW, Yang Z, Kirsch D, Jia C, Xu R et al (2017) Highly anisotropic conductors. Adv Mater 29(41):170323810.1002/adma.201703331 ↗
4. Henninger SK, Ernst SJ, Gordeeva L, Bendix P, Fröhlich D, Grekova AD et al (2017) New materials for adsorption heat transformation and storage. Renew Energy 110:59–6810.1016/j.renene.2016.08.041 ↗
5. Sano K, Ishida Y, Aida T (2018) Synthesis of anisotropic hydrogels and their applications. Angew Chem Int Ed Engl 57(10):2532–254310.1002/anie.201708196 ↗
6. Zhang Y, Zhang CH, Feng Y, Zhang TD, Chen QG, Chi QG et al (2019) Excellent energy storage performance and thermal property of polymer-based composite induced by multifunctional one-dimensional nanofibers oriented in-plane direction. Nano Energy 56:138–15010.1016/j.nanoen.2018.11.044 ↗
7. Wang ZG, Liu W, Liu YH, Ren Y, Li YP, Zhou L et al (2020) Highly thermal conductive, anisotropically heat-transferred, mechanically flexible composite flm by assembly of boron nitride nanosheets for thermal management. Compos Part B-Eng 180:1756910.1016/j.compositesb.2019.107569 ↗
8. Hu ZY, Zhang P, Xie RS, Li MT, Lu ZY, Xu X et al (2018) Controlled synthesis of train-structured montmorillonite/layered double hydroxide nanocomposites by regulating the hydrolysis of polylactic acid. J Mater Sci 53(23):15859–1587010.1007/s10853-018-2758-6 ↗
9. Li J, Wang ZX, Chu JW, Cheng ZZ, He P, Wang JJ et al (2019) Oriented layered Bi2O2Se nanowire arrays for ultrasensitive photodetectors. Appl Phys Lett 114(15):15110410.1063/1.5094192 ↗
10. Nazir S, Jiang SC, Cheng JL, Yang KS (2019) Enhanced interfacial perpendicular magnetic anisotropy in Fe/MgO heterostructure via interfacial engineering. Appl Phys Lett 114(7):07240710.1063/1.5081834 ↗
11. Shi A, Li Y, Liu W, Xu JZ, Yan DX, Lei J et al (2019) Highly thermally conductive and mechanically robust composite of linear ultrahigh molecular weight polyethylene and boron nitride via constructing nacre-like structure. Compos Sci Technol 184:10785810.1016/j.compscitech.2019.107858 ↗
12. Hirota K, Hara S, Wada H, Shimojima A, Kuroda K (2019) Fabrication of uniaxially aligned silica nanogrooves with sub-5 nm periodicity on centimeter-scale si substrate using poly(dimethylsiloxane) stamps. ACS Nano 13(3):2795–280310.1021/acsnano.8b07714 ↗
13. Hu ZH, Wu ZT, Han C, He J, Ni Z, Chen W (2018) Two-dimensional transition metal dichalcogenides: interface and defect engineering. Chem Soc Rev 47(9):3100–312810.1039/C8CS00024G ↗
14. Teng CC, Ma CCM, Chiou KC, Lee TM (2012) Synergetic effect of thermal conductive properties of epoxy composites containing functionalized multi-walled carbon nanotubes and aluminum nitride. Compos Part B-Eng 43(2):265–27110.1016/j.compositesb.2011.05.027 ↗
15. Nony-Davadie C, Peltier L, Chemisky Y, Surowiec B, Meraghni F (2018) Mechanical characterization of anisotropy on a carbon fiber sheet molding compound composite under quasi-static and fatigue loading. J Compos Mater 53(11):1437–145710.1177/0021998318804612 ↗
16. Shen J, Zhang P, Xie RS, Chen L, Li MT, Li JP et al (2019) Controlled self-assembled nife layered double hydroxides/reduced graphene oxide nanohybrids based on the solid-phase exfoliation strategy as an excellent electrocatalyst for the oxygen evolution reaction. ACS Appl Mater Inter 11(14):13545–1355610.1021/acsami.8b22260 ↗
17. Thorkelsson K, Bai P, Xu T (2015) Self-assembly and applications of anisotropic nanomaterials: a review. Nano Today 10(1):48–6610.1016/j.nantod.2014.12.005 ↗
18. Li JP, Zhang P, Zhao XL, Chen L, Shen J, Li MT et al (2019) Structure-controlled Co–Al layered double hydroxides/reduced graphene oxide nanomaterials based on solid-phase exfoliation technique for supercapacitors. J Colloid Interf Sci 549:236–24510.1016/j.jcis.2019.04.062 ↗
19. Xue Y, Li XF, Wang HS, Zhao F, Zhang DH, Chen YF et al (2019) Improvement in thermal conductivity of through-plane aligned boron nitride/silicone rubber composites. Mater Design 165:10758010.1016/j.matdes.2018.107580 ↗
20. Wang ZG, Chen MZ, Liu YH, Duan HJ, Xu L, Zhou L et al (2019) Nacre-like composite films with high thermal conductivity, flexibility, and solvent stability for thermal management applications. J Mater Chem C 7(29):9018–902410.1039/C9TC02845E ↗
21. Xiao C, Chen L, Tang YL, Zhang X, Zheng K, Tian XY (2019) Three dimensional porous alumina network for polymer composites with enhanced thermal conductivity. Compos Part A-Appl S 124:10551110.1016/j.compositesa.2019.105511 ↗
22. Liu RYF, Jin Y, Hiltner A, Baer E (2003) Probing nanoscale polymer interactions by forced-assembly. Macromol Rapid Comm 24(16):943–94810.1002/marc.200300051 ↗
23. Decker JJ, Meyers KP, Paul DR, Schiraldi DA, Hiltner A, Nazarenko S (2015) Polyethylene-based nanocomposites containing organoclay: a new approach to enhance gas barrier via multilayer coextrusion and interdiffusion. Polymer 61:42–5410.1016/j.polymer.2015.01.061 ↗
24. Shi A, Li Y, Liu W, Lei J, Xu L, Li ZM (2019) Enhanced thermal conductivity of multilayered sheets of polyethylene and boron nitride via promoting molecular diffusion between layers. J Appl Phys 125(20):20510110.1063/1.5093686 ↗
25. Kamdar AR, Ayyer RK, Poon BC, Marchand GR, Hiltner A, Baer E (2009) Effect of tie-layer thickness on the adhesion of ethylene–octene copolymers to polypropylene. Polymer 50(14):3319–332810.1016/j.polymer.2009.04.048 ↗
26. Wolak MA, Pan MJ, Wan A, Shirk JS, Mackey M, Hiltner A et al (2008) Dielectric response of structured multilayered polymer films fabricated by forced assembly. Appl Phys Lett 92(11):11330110.1063/1.2897029 ↗
27. Zhao K, Li SS, Huang M, Shi XZ, Zheng GQ, Liu CT et al (2019) Remarkably anisotropic conductive MWCNTs/polypropylene nanocomposites with alternating microlayers. Chem Eng J 358:924–93510.1016/j.cej.2018.10.078 ↗
28. Yang SY, Huang YF, Lei J, Zhu L, Li ZM (2018) Enhanced thermal conductivity of polyethylene/boron nitride multilayer sheets through annealing. Compos Part A-Appl S 107:135–14310.1016/j.compositesa.2017.12.031 ↗
29. Ren L, Zhao J, Wang SJ, Zha JW, Hu GH, Dang ZM (2015) Remarkably variable dielectric and magnetic properties of poly(vinylidene fluoride) nanocomposite films with triple-layer structure. Compos Sci Technol 107:107–11210.1016/j.compscitech.2014.12.008 ↗
30. Jeong SH, Song JB, Kim KL, Choi YH, Lee H (2016) Enhanced thermal properties of epoxy composite containing cubic and hexagonal boron nitride fillers for superconducting magnet applications. Compos Part B-Eng 107:22–2810.1016/j.compositesb.2016.09.066 ↗
31. Jiang F, Cui SQ, Song N, Shi LY, Ding P (2018) Hydrogen bond-regulated boron nitride network structures for improved thermal conductive property of polyamide-imide composites. ACS Appl Mater Inter 10(19):16812–1682110.1021/acsami.8b03522 ↗
32. Jiji LM (2009) Heat convection. Springer, Berlin10.1007/978-3-642-02971-4 ↗
33. Aadmi M, Karkri M, El Hammouti M (2015) Heat transfer characteristics of thermal energy storage for PCM (phase change material) melting in horizontal tube: numerical and experimental investigations. Energy 85:339–35210.1016/j.energy.2015.03.085 ↗
34. Wu CY, Huang YH, Wu HH, Hsieh TE (2018) Evaluation of the thermal conductance of flip-chip bonding structure utilizing the measurement based on Fourier’s law of heat conduction at steady-state. AIP Adv 8(6):06520810.1063/1.5028318 ↗
35. Domun N, Hadavinia H, Zhang T, Sainsbury T, Liaghat GH, Vahid S (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials—a review of the current status. Nanoscale 7(23):10294–1032910.1039/C5NR01354B ↗
36. Tsekmes IA, Kochetov R, Morshuis PHF, Smit JJ (2014) Modeling the thermal conductivity of polymeric composites based on experimental observations. IEEE T Dielect El In 21(2):412–42310.1109/TDEI.2013.004142 ↗
37. Zhang XM, Zhang JM, Xia LC, Li CH, Wang JF, Xu F et al (2017) Simple and consecutive melt extrusion method to fabricate thermally conductive composites with highly oriented boron nitrides. ACS Appl Mater Inter 9(27):22977–2298410.1021/acsami.7b05866 ↗
38. Hamed A, Ndao S (2018) High anisotropy metamaterial heat spreader. Int J Heat Mass Tran 121:10–1410.1016/j.ijheatmasstransfer.2017.12.146 ↗