journal article·2019-07

Preparation of nanostructured TiO2 films with high catalytic activity and their 3D spatial distribution of anatase and rutile phases

M. T. Colomer, A. del Campo

Journal of Materials Science· Volume 54· Issue 13
Publisher page

Abstract

[EN] In this study, a facile, cheap, scalable, and environmentally friendly method has been developed to prepare nanostructured TiO2 coatings with a high catalytic activity. In addition, a protocol to characterize the prepared films in order to obtain consistent results between their structure, their microstructure, and their catalytic behavior, has been established. For that, two types of TiO2 coatings have been fabricated by applying once TiO2 aqueous suspensions, prepared form commercial nanopowders, by immersion followed by an adequate thermal treatment. The first type of films is constituted by coatings with anatase as single phase, and the second one by films with a rutile molar fraction of XR = 0.07  0.02, determined from grazing incidence X-ray diffraction (GI-XRD) data. High spatial resolution chemical imaging, obtained by confocal Raman microscopy (CRM), of the surface and of the cross-section for the films shows a good distribution of rutile without any segregation of this phase. Furthermore, high resolution electron microscopy (HREM) confirmed the presence of anatase/rutile biphasic domains in those areas in which both phases were previously found together by CRM. In addition, the catalytic data fit to a first-order kinetic model with high catalytic reaction constants (k’), especially when rutile is present. Furthermore, consistent results have been found in this study between textural, structural and microstructural features with catalytic properties for the prepared TiO2 films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Chen HH, Nanayakkara CE, Grassian VH (2012) Titanium dioxide photocatalysis in atmospheric chemistry. Chem Rev 112:5919–594810.1021/cr3002092 ↗
2. Henderson MA, Robbins MD (2011) Methylene bromide chemistry and photochemistry on rutile TiO2 (110). Surf Sci 605:1834–184110.1016/j.susc.2011.06.020 ↗
3. Yuan L, Weng XL, Zhou M, Zhang QY, Deng LJ (2017) Structural and visible-near infrared optical properties of Cr-doped TiO2 for colored pigments. Nano Res Lett 12:59710.1186/s11671-017-2365-5 ↗
4. O’Regan B, Grätzel M (1991) A low-cost, high efficiency solar-cell based on dye-sensitized colloidal TiO2 films. Nature 353:737–74010.1038/353737a0 ↗
5. Liu ZY, Zhang XT, Nishimoto S, Jin M, Tryk DA, Murakami T, Fujishima A (2007) Anatase TiO2 nanoparticles on rutile TiO2 nanorods: a hetereogeneous nanostructure via layer-by-layer assembly. Langmuir 23:10916–1091910.1021/la7018023 ↗
6. Baba K, Bulou S, Choquet P, Boscher ND (2017) Photocatalytic anatase TiO2 thin films on polymer optical fiber using atmospheric-pressure plasma. ACS Appl Mater Interfaces 9:13733–1374110.1021/acsami.7b01398 ↗
7. Mor GK, Varghese OK, Paulose M, Ong KG, Grimes CA (2006) Fabrication of hydrogen sensors with transparent titanium oxide nanotube-array thin films as sensing elements. Thin Solid Films 496:42–4810.1016/j.tsf.2005.08.190 ↗
8. Castaneda L (2007) Effect of palladium coatings on oxygen sensors of titanium dioxide thin films. Mater Sci Eng B 139:149–15410.1016/j.mseb.2007.01.046 ↗
9. Chibani O, Touam T, Chelouche A, Ouarez L (2018) Investigation of the effects of acidic pH and annealing on the properties of nanostructured TiO2 thin films for waveguiding applications. J Alloys Compd 768:866–87410.1016/j.jallcom.2018.07.338 ↗
10. Colomer MT (2006) Nanoporous anatase thin films as fast proton-conducting materials. Adv Mater 18:371–37410.1002/adma.200500689 ↗
11. Colomer MT (2006) Nanoporous anatase ceramic membranes as fat-proton-conducting materials. J Eur Ceram Soc 26:1231–123610.1016/j.jeurceramsoc.2005.01.035 ↗
12. Gerisher H (1993). In: Ollis DF, Al-Ekabi H (eds) Proceedings of photocatalytic purification and treatment of water and air (1st International Conference, London, Ontario, Canada). Elsevier
13. Negishi N, Takeuchi K, Ibusuki T (1997) The surface structure of titanium dioxide thin films photocatalyst. Appl Surf Sci 121:417–42010.1016/S0169-4332(97)00349-8 ↗
14. Guillard C, Beeaugiraud B, Durtriez C, Herrmann JM, Jaffrezic H, Jaffrezic-Renault N, Lacroix M (2002) Physicochemical properties and photocatalytic activities of TiO2-films prepared by sol-gel methods. Appl Catal B Environ 39:331–34210.1016/S0926-3373(02)00120-0 ↗
15. Liu XZ, Wen K, Deng CM, Yang K, Deng CG, Liu M, Zhou KS (2018) Nanostructured photocatalytic TiO2 coating deposited by suspension plasma spraying with different injection positions. J Therm Spray Technol 27:245–25410.1007/s11666-018-0693-3 ↗
16. Wang XY, Liu Z, Liao H, Klein D, Coddet C (2004) Microstructure and electrical properties of plasma sprayed porous TiO2 coatings containing anatase. Symp Thin Solid Films 451:37–4210.1016/j.tsf.2003.10.151 ↗
17. Toma F-L, Keller N, Bertrand G, Klein D, Coddet C (2003) Elaboration and characterization of environmental properties of TiO2 plasma sprayed coatings. Int J Photoenergy 5:141–14510.1155/S1110662X03000254 ↗
18. Colmenares-Angulo J, Zhao S, Young C, Orlov A (2009) The effects of thermal spray technique and post-deposition treatment on the photocatalytic activity of TiO2 coatings. Surf Coat Technol 204:423–42710.1016/j.surfcoat.2009.07.046 ↗
19. Toma F-L, Berger L-M, Jacquet D, Wicky D, Villaluenga I, de Miguel YR, Lindelov JS (2009) Comparative study on the photocatalytic behavior of titanium oxide thermal sprayed coatings from powders and suspensions. Surf Coat Technol 203:2150–215610.1016/j.surfcoat.2008.10.022 ↗
20. Manuputty MY, Dreyer JAH, Sheng Y, Bringley EJ, Botero ML, Akroyd J, Kraft M (2019) Polymorphism of nanocrystalline TiO2 prepared in a stagnation flame: formation of the TiO2-II phase. Chem Sci 10(5):1342–135010.1039/C8SC02969E ↗
21. Kozerski S, Toma F-L, Pawlowski L, Leupolt B, Latka L, Berger L-M (2010) Suspension plasma sprayed TiO2 coatings using different injectors and their photocatalytic properties. Surf Coat Technol 205(4):980–98610.1016/j.surfcoat.2010.04.068 ↗
22. Bannier E, Daraut G, Sánchez E, Denoijean A, Bordes MC, Salvador MD, Rayón E, Ageorges H (2011) Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates. Surf Coat Technol 206:378–38610.1016/j.surfcoat.2011.07.039 ↗
23. Bai M, Khammas R, Guan L, Murray JW, Hussain T (2017) Suspension high velocity oxy-fuel spraying of a rutile TiO2 feedstock: microstructure, phase evolution and photocatalytic behavior. Ceram Int 43:15288–1529510.1016/j.ceramint.2017.08.068 ↗
24. Islak S, Buytoz S, Ersoz E, Orhan N, Stokes J, Hashmi MS, Somuskiran I, Tosun N (2012) Effect on microstructure of TiO2 rate in Al2O3–TiO2 composite coating produced using plasma spray method. Optoelectron Adv Mater Rapid Commun 6:844–849
25. Podlesak H, Pawlowski L, Laurenys J, Jaworski R, Lampke T (2008) Advanced microstructural study of suspension plasma sprayed titanium oxide coatings. Surf Coat Technol 202:3723–373110.1016/j.surfcoat.2008.01.017 ↗
26. Bemporad E, Bolelli G, Canillo V, Felicis D, Gadow R, Killinger A, Lusvarghi L, Rauch J, Sebastiani M (2010) Structural characterisation of high velocity suspension flame sprayed (HVSFS) TiO2 coatings. Surf Coat Technol 204:3902–391010.1016/j.surfcoat.2010.05.011 ↗
27. Pala Z, Shaw E, Murray JW, Senin N, Hussain T (2017) Suspension high velocity oxy-fuel spraying of TiO2: a quantitative approach to phase composition. J Eur Ceram Soc 37(2):801–81010.1016/j.jeurceramsoc.2016.08.030 ↗
28. Bickley RI, Gonzalezcarreno T, Lees JS, Palmisano L, Tilley RD (1991) A structural investigation of titanium-dioxide photocatalysts. J Solid State Chem 92:178–19010.1016/0022-4596(91)90255-G ↗
29. Guimaraes RR, Parussulo ALA, Araki K (2016) Impact of nanoparticles preparation method on the synergic effect in anatase/rutile mixtures. Electrochim Acta 222:1378–138610.1016/j.electacta.2016.11.114 ↗
30. Wang W-K, Chen J-J, Zhang X, Huang Y-X, Li W-W, Yu H-Q (2016) Self-induced synthesis of phase-junction TiO2 with a tailored rutile to anatase ratio below phase transition temperature. Sci Rep 6:2049110.1038/srep20491 ↗
31. Su R, Bechstein R, So L, Vang RT, Sillassen M, Esbjornsson B, Palmqvist A, Besenbacher F (2011) How the anatase-to-rutile ratio influences the photoactivity of TiO2. J Phys Chem C 115:24287–2429210.1021/jp2086768 ↗
32. Kho YK, Iwase A, Teoh WY, Maedler L, Kudo A, Amal R (2010) Photocatalytic H2 evolution over TiO2 nanoparticles. The synergistic effect of anatase and rutile. J Phys Chem C 114:2821–282910.1021/jp910810r ↗
33. Tiwari A, Mondal I, Ghosh S, Chatttopadhyay N, Pal U (2016) Fabrication of mixed phase TiO2 heterojunction nanorods and their enhanced photoactivities. Phys Chem Chem Phys 18:15260–1526810.1039/C6CP00486E ↗
34. Staiger M, Bowen P, Ketterer J, Bohonek J (2002) Particle size distribution measurement and assessment of agglomeration of commercial nanosized ceramic particles. J Dispers Sci Techol 23(5):619–63010.1081/DIS-120015367 ↗
35. Criado J, Real C (1983) Mechanism of the inhibiting effect of phosphate on the anatase/rutile transformation induced by thermal and mechanical treatment of TiO2. J Chem Soc Faraday Trans I Phys Chem Condens Phases 79(12):2765–2771
36. Gullikson EM (2009) X-ray data booklet, compiled and edited by Thompson AC and Gullikson EM (2009) chapter 1, section 1.6., Lawrence Berkeley National Laboratory, USA, pp 1–38
37. Tompsett GA, Bowmaker GA, Cooney RP, Metson JB, Rodgers KA, Seakins JM (1995) The Raman spectrum of brookite, TiO2 (PBCA, Z = 8). J Raman Spectrosc 26(1):57–6210.1002/jrs.1250260110 ↗
38. Chen X, Mao SS (2007) Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications. Chem Rev 107(7):2891–295910.1021/cr0500535 ↗
39. Fazio S, Guzmán J, Colomer MT, Salomoni A, Moreno R (2008) Colloidal stability of nanosized titania aqueous suspensions. J Eur Ceram Soc 28:2171–217610.1016/j.jeurceramsoc.2008.02.017 ↗
40. Yan J, Wu G, Guan N, Li L, Li Z, Cao X (2013) Understanding the effect of surface/bulk defects on the photocatalytic activity of TiO2: anatase versus rutile. Phys Chem Phys 15:10978–1098810.1039/c3cp50927c ↗
41. Zhang WF, He YL, Zhang MS, Yin Z, Chen Q (2000) Raman scattering study on anatase TiO2 nanocrystals. J Phys D Appl Phys 33(8):912–91610.1088/0022-3727/33/8/305 ↗
42. Zhu K-R, Zhang M-S, Chen Q, Yin Z (2005) Size and phonon-confinement effects on low-frequency Raman mode of anatase TiO2 nanocrystal. Phys Lett A 340(1–4):220–22710.1016/j.physleta.2005.04.008 ↗
43. Parussulo ALA, Bonacin JA, Toma SH, Araki K, Toma HE (2009) Unravelling the chemical morphology of a mesoporous titanium dioxide interface by confocal Raman microscopy: new clues for improving the efficiency of dye solar cells and photocatalysts. Langmuir 25:11269–1127110.1021/la902551k ↗
44. Ruan P, Quian JS, Xu YF, Xie HX, Shao CL, Zhou XF (2013) Mixed-phase TiO2 nanorods assembled microsphere: crystal phase control and photovoltaic application. CrystEngComm 15:5093–509910.1039/c3ce40351c ↗
45. Hurum DC, Agrios AG, Gray KA, Rajh T, Thurnauer MC (2003) Explaining the enhanced photocatalytic activity of Degussa P25 mixed-phase TiO2 using EPR. J Phys Chem B 107:4545–454910.1021/jp0273934 ↗
46. Zhang X, Lin YH, He DQ, Zhang JF, Fan ZY, Xie TF (2011) Interface junction at anatase/rutile in mixed-phase TiO2: formation and photo-generated charge carriers properties. Chem Phys Lett 504:71–7510.1016/j.cplett.2011.01.060 ↗
47. Houas A, Lachheb H, Ksibi M, Elaoloui E, Guillard C, Hermann JM (2001) Photocatalytic degradation pathway of methylene blue in water. Appl Catal B Environ 31:145–14710.1016/S0926-3373(00)00276-9 ↗
48. Bordes MC, Vicent M, Moreno A, Moreno R, Borrell A, Salvador MD, Sánchez E (2013) Microstructure and photocatalytic activity of APS coatings obtained from different TiO2 nanopowders. Surf Coat Technol 220:179–18610.1016/j.surfcoat.2012.08.059 ↗