journal article·2018-08

A new approach for preparation of metal-containing polyamide/carbon textile laminate composites with tunable electrical conductivity

Filipa Oliveira, Nadya Dencheva, Pedro Martins, Senentxu Lanceros-Méndez, Zlatan Denchev

Journal of Materials Science· Volume 53· Issue 16
Publisher page

Abstract

Multiscale thermoplastic laminate composites based on polyamide 6 (PA6) dually reinforced by carbon fiber woven textile structures (CFT) and different micron-sized metal particles are prepared for the first time by microencapsulation strategy. In a first step, activated anionic ring-opening polymerization (AAROP) of e-caprolactam is carried out in suspension, in the presence of different metal particles, to produce shell-core PA6 microcapsules (PAMC) loaded with 13–19% metal. In a second step, the loaded PAMC are distributed between CFT plies with fiber volume fractions Vf = 0.25 or Vf = 0.50 and then the ply arrays are consolidated by compression molding. Separately, metal-loaded PA6 hybrid composites are prepared by direct compression molding of PAMC and used to compare their properties to the CFT-metal laminates. Light- and scanning electron microscopy are used to study the morphology and the interfaces between the fillers and the polymeric matrix. These structural results are related to the mechanical behavior in tension and the electrical properties. A notable increase of the d.c. electrical conductivity in 7 orders of magnitude is observed for the CFT-metal laminates with respect to the neat PA6. This increase is accompanied by a 2.5–3.0 times growth of the Young’s modulus and of the strength at break. It is concluded that the microencapsulation strategy can be applied to produce multifunctional CFT-metal-PA6 thermoplastic composites with tailored electrical and improved mechanical properties for advanced applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Polymer composites and self-healing · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Fogel M, Parlevliet P, Olivier P, Dantras É (2017) Manufacturing of conductive structural composites through spraying of CNTs/epoxy dispersions on dry carbon fiber plies. Compos Part A Appl Sci Manuf 100:40–4710.1016/j.compositesa.2017.04.020 ↗
2. Hine PJ, Bonner M, Ward IM et al (2014) Hybrid carbon fibre/nylon 12 single polymer composites. Compos Part A Appl Sci Manuf 65:19–2610.1016/j.compositesa.2014.05.020 ↗
3. Stavrov D, Bersee HEN (2005) Resistance welding of thermoplastic composites-an overview. Compos Part A Appl Sci Manuf 36:39–5410.1016/S1359-835X(04)00182-4 ↗
4. Steenkamer DA, Sullivan JL (1998) On the recyclability of a cyclic thermoplastic composite material. Compos Part B Eng 29:745–75210.1016/S1359-8368(98)00016-X ↗
5. Chang IY, Lees JK (1988) Recent development in thermoplastic composites: a review of matrix systems and processing methods. J Thermoplast Compos Mater 1:277–29610.1177/089270578800100305 ↗
6. Khondker OA, Ishiaku US, Nakai A, Hamada H (2005) Fabrication mechanical properties of unidirectional jute/PP composites using jute yarns by film stacking method. J Polym Environ 13:115–12610.1007/s10924-005-2943-y ↗
7. Svensson N, Shishoo R, Gilchrist M (1998) Manufacturing of thermoplastic composites from commingled yarns: a review. J Thermoplast Compos Mater 11:22–5610.1177/089270579801100102 ↗
8. Bernet N, Michaud V, Bourban P-E, Månson J-A (2001) Commingled yarn composites for rapid processing of complex shapes. Compos Part A Appl Sci Manuf 32:1613–162610.1016/S1359-835X(00)00180-9 ↗
9. Sakaguchi M, Nakai A, Hamada H, Takeda N (2000) The mechanical properties of unidirectional thermoplastic composites manufactured by a micro-braiding technique. Compos Sci Technol 60:717–72210.1016/S0266-3538(99)00175-X ↗
10. van Rijswijk K, Bersee HEN (2007) Reactive processing of textile fiber-reinforced thermoplastic composites: an overview. Compos Part A Appl Sci Manuf 38:666–68110.1016/j.compositesa.2006.05.007 ↗
11. Sekiguchi H, Coutin B (1973) Polymerizability and related problems in the anionic polymerization of lactams. J Polym Sci Polym Chem Ed 11:1601–161410.1002/pol.1973.170110710 ↗
12. Provazník M, Puffr R, Šebenda J (1988) Dielectric properties of lactams and their significance in the polymerization process. Eur Polym J 24:511–51410.1016/0014-3057(88)90041-9 ↗
13. Luisier A, Bourban P-E, Månson J-AE (2003) Reaction injection pultrusion of PA12 composites: process and modelling. Compos Part A Appl Sci Manuf 34:583–59510.1016/S1359-835X(03)00101-5 ↗
14. Cho B-G, McCarthy SP, Fanucci JP, Nolet SC (1996) Fiber reinforced nylon-6 composites produced by the reaction injection pultrusion process. Polym Compos 17:673–68110.1002/pc.10659 ↗
15. van Rijswijk K, Bersee HEN, Jager WF, Picken SJ (2006) Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: choice of activator and initiator. Compos Part A Appl Sci Manuf 37:949–95610.1016/j.compositesa.2005.01.023 ↗
16. van Rijswijk K, Bersee HEN, Beukers A et al (2006) Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: influence of polymerisation temperature on matrix properties. Polym Test 25:392–40410.1016/j.polymertesting.2005.11.008 ↗
17. Harkin-Jones E, Crawford R (1996) Rotational molding of liquid plastic systems: an assessment of material moldability. Adv Polym Technol 15:71–10010.1002/adv.1996.060150106 ↗
18. Harkin-Jones E, Crawford RJ (1996) Mechanical properties of rotationally molded nyrim. Polym Eng Sci 36:615–62510.1002/pen.10449 ↗
19. Ying G, Yang G (2009) Manufacturing and physical properties of all-polyamide composites. J Mater Sci 44:4639–4644. https://doi.org/10.1007/s10853-009-3708-010.1007/s10853-009-3708-0 ↗
20. Dencheva N, Sampaio AS, Oliveira FM et al (2014) Preparation and properties of polyamide-6-based thermoplastic laminate composites by a novel in-mold polymerization technique. J Appl Polym Sci 131:4008310.1002/app.40083 ↗
21. Guo Z, Sang L, Wang Z et al (2016) Deposition of copper thin films by plasma enhanced pulsed chemical vapor deposition for metallization of carbon fiber reinforced plastics. Surf Coatings Technol 307:1059–106410.1016/j.surfcoat.2016.07.029 ↗
22. Lupoi R, O’Neill W (2010) Deposition of metallic coatings on polymer surfaces using cold spray. Surf Coatings Technol 205:2167–217310.1016/j.surfcoat.2010.08.128 ↗
23. Zhou XL, Chen AF, Liu JC et al (2011) Preparation of metallic coatings on polymer matrix composites by cold spray. Surf Coatings Technol 206:132–13610.1016/j.surfcoat.2011.07.005 ↗
24. Che H, Vo P, Yue S (2017) Metallization of carbon fibre reinforced polymers by cold spray. Surf Coatings Technol 313:236–24710.1016/j.surfcoat.2017.01.083 ↗
25. Archambault G, Jodoin B, Gaydos S, Yandouzi M (2016) Metallization of carbon fiber reinforced polymer composite by cold spray and lay-up molding processes. Surf Coatings Technol 300:78–8610.1016/j.surfcoat.2016.05.008 ↗
26. Kong K, Cheedarala RK, Kim M et al (2016) Electrical thermal heating and piezoresistive characteristics of hybrid CuO–woven carbon fiber/vinyl ester composite laminates. Compos Part A 85:103–11210.1016/j.compositesa.2016.03.015 ↗
27. Oliveira F, Dencheva N, Martins P (2016) Reactive microencapsulation of carbon allotropes in polyamide shell-core structures and their transformation in hybrid composites with tailored electrical properties. EXPRESS Polym Lett 10:160–17510.3144/expresspolymlett.2016.15 ↗
28. Brêda C, Dencheva N, Lanceros-Mendez S, Denchev Z (2016) Preparation and properties of metal-containing polyamide hybrid composites via reactive microencapsulation. J Mater Sci 51:10534–10554. https://doi.org/10.1007/s10853-016-0274-010.1007/s10853-016-0274-0 ↗
29. Dencheva N, Denchev Z, Lanceros-Méndez S, Ezquerra Sanz T (2016) One-step in situ synthesis of polyamide microcapsules with inorganic payload and their transformation into responsive thermoplastic composite materials. Macromol Mater Eng 301:119–12410.1002/mame.201500194 ↗
30. Dencheva NV, Vale DM, Denchev ZZ (2016) Dually reinforced all-polyamide laminate composites via microencapsulation strategy. Polym Eng Sci 57:806–82010.1002/pen.24456 ↗
31. Gürdal Z, Haftka RT, Hajela P (1999) Design and optimization of laminated composite materials. Wiley, New York
32. Dan F, Vasiliu-Oprea C (1998) Anionic polimerization of caprolactama in organic media. Morphological aspects. Colloid Polym Sci 276:483–49510.1007/s003960050270 ↗
33. Vasiliu-Oprea C, Dan F (1996) On the relation between synthesis parameters and morphology of anionic polycaproamide obtained in organic media. I. Influence of the Na[O(CH2)2OCH3]2AlH2/isophorone diisocyanate catalytic system. J Appl Polym Sci 62:1517–152710.1002/(SICI)1097-4628(19961205)62:10<1517::AID-APP4>3.0.CO;2-R ↗
34. Ricco L, Monticelli O, Russo S et al (2002) Fast-activated anionic polymerization of ε-caprolactam in suspension, 1. Role of the continuous phase on characteristics and properties of powdered PA6. Macromol Chem Phys 203:1436–144410.1002/1521-3935(200207)203:10/11<1436::AID-MACP1436>3.0.CO;2-V ↗
35. Mendes SF, Costa CM, Serra RS et al (2012) Influence of filler size and concentration on the low and high temperature dielectric response of poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3 composites. J Polym Res 19:996710.1007/s10965-012-9967-5 ↗
36. Lopes AC, Costa CM, Serra RS et al (2013) Dielectric relaxation, ac conductivity and electric modulus in poly(vinylidene fluoride)/NaY zeolite composites. Solid State Ionics 235:42–5010.1016/j.ssi.2013.01.013 ↗
37. Costa P, Silva J, Lanceros-Méndez S (2016) Strong increase of the dielectric response of carbon nanotube/poly(vinilidene fluoride) composites induced by carbon nanotube type and pre-treatment. Compos Part B Eng 93:310–31610.1016/j.compositesb.2016.03.010 ↗