Tungsten film as a hard and compatible carrier for antibacterial agent of silver
Source abstract
Abstract
Silver-containing tungsten (W–Ag) films for antibacterial applications were deposited on glass, silicon, and 316L stainless-steel substrates by magnetron sputtering with the silver target current of 0–2.0 A. The addition of silver improves adhesion of the films on glass substrate due to the reduced residual stress in the films. SEM and EDX analyses reveal Ag-rich tiny dots (~ 20 nm) at the surface of W–Ag films with high silver contents. In XRD patterns, silver peaks are present for the samples deposited at 1.5 and 2.0 A, and tungsten grain size is decreased from ~ 23 to 10 nm by silver addition. XPS analysis shows that tungsten is slightly oxidized (WO3) at the top surface of the film, and silver presents mainly in metallic state. The low Ag/W ratios and the small surface roughness (< 8 nm) indicate that silver segregation at the film surface is not obvious. Microhardness of the samples with ≤ 6.7 at.% silver is nearly seven times that of the stainless steel (~ 250 HV). The coated samples are hydrophobic tested by contact angle measurement. The potentiodynamic polarization and the soaking test simulating the inflammatory state show that even corrosion occurs and silver addition decreases corrosion resistance of the films. The antibacterial ratio of the coated samples increases with silver content, being 91% at 4.2 at.% silver content tested by agar plate counting method. In agar disk diffusion assay, no inhibition zone is observed for all samples. The antibacterial property of the W–Ag films is localized, long-lasting, and reusable, which would be beneficial for their potential biomedical and environmental applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoparticles: synthesis and applications · Nanotechnology research and applications · Laser-Ablation Synthesis of Nanoparticles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Gould IM (2006) Costs of hospital-acquired methicillin-resistant Staphylococcus aureus (MRSA) and its control. Int J Antimicrob Agents 28:379–38410.1016/j.ijantimicag.2006.09.001 ↗
2. Dong Y, Li X, Tian L, Bell T, Sammons RL, Dong H (2011) Towards long-lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding. Acta Biomater 7:447–45710.1016/j.actbio.2010.08.009 ↗
3. Kawakami H, Yoshida K, Nishida Y, Kikuchi Y, Sato Y (2008) Antibacterial properties of metallic elements for alloying evaluated with application of JIS Z 2801:2000. ISIJ Int 48:1299–130410.2355/isijinternational.48.1299 ↗
4. Mihailescu IN, Bociaga D, Socol G, Stan GE, Chifiriuc M-C, Bleotu C, Husanu MA, Popescu-Pelin G, Duta L, Luculescu CR, Negut I, Hapenciuc C, Besleaga C, Zgura I, Miculescu F (2016) Fabrication of antimicrobial silver-doped carbon structures by combinatorial pulsed laser deposition. Int J Pharm 515:592–60610.1016/j.ijpharm.2016.10.041 ↗
5. Raucci MG, Adesanya K, Di Silvio L, Catauro M, Ambrosio L (2010) The biocompatibility of silver-containing Na2O·CaO·2SiO2 glass prepared by sol-gel method: In vitro studies. J Biomed Mater Res Part B 92B:102–11010.1002/jbm.b.31495 ↗
6. Bellantone M, Williams HD, Hench LL (2002) Broad-spectrum bactericidal activity of Ag2O-doped bioactive glass. Antimicrob Agents Chemother 46:1940–194510.1128/AAC.46.6.1940-1945.2002 ↗
7. Cazalini EM, Miyakawa W, Teodoro GR, Sobrinho ASS, Matieli JE, Massi M, Koga-Ito CY (2017) Antimicrobial and anti-biofilm properties of polypropylene meshes coated with metal-containing DLC thin films. J Mater Sci Mater Med 28:9710.1007/s10856-017-5910-y ↗
8. Chang Y-Y, Huang H-L, Chen Y-C, Weng J-C, Lai C-H (2013) Characterization and antibacterial performance of ZrNO–Ag coatings. Surf Coat Technol 231:224–22810.1016/j.surfcoat.2012.05.084 ↗
9. Hsieh JH, Yeh TH, Li C, Chang SY, Chiu CH, Huang CT (2013) Mechanical properties and antibacterial behaviors of TaN-(Ag,Cu) nanocomposite thin films after annealing. Surf Coat Technol 228:S116–S11910.1016/j.surfcoat.2012.07.022 ↗
10. Xu R, Yang X, Jiang J, Li P, Zhang X, Wu G, Chu PK (2015) Effects of silver plasma immersion ion implantation on the surface characteristics and cytocompatibility of titanium nitride films. Surf Coat Technol 279:166–17010.1016/j.surfcoat.2015.08.033 ↗
11. Manninen NK, Calderon S, Carvalho I, Henriques M, Cavaleiro A, Carvalho S (2016) Antibacterial Ag/a-C nanocomposite coatings: the influence of nano-galvanic a-C and Ag couples on Ag ionization rates. Appl Surf Sci 377:283–29110.1016/j.apsusc.2016.03.113 ↗
12. Wang LJ, Zhang F, Fong A, Lai KM, Shum PW, Zhou ZF, Gao ZF, Fu T (2018) Effects of silver segregation on sputter deposited antibacterial silver-containing diamond-like carbon films. Thin Solid Films 650:58–6410.1016/j.tsf.2018.02.015 ↗
13. Calderon Velasco S, Cavaleiro A, Carvalho S (2016) Functional properties of ceramic-Ag nanocomposite coatings produced by magnetron sputtering. Prog Mater Sci 84:158–19110.1016/j.pmatsci.2016.09.005 ↗
14. Wojcieszak D, Mazur M, Kaczmarek D, Mazur P, Szponar B, Domaradzki J, Kepinski L (2016) Influence of the surface properties on bactericidal and fungicidal activity of magnetron sputtered Ti–Ag and Nb–Ag thin films. Mater Sci Eng C 62:86–9510.1016/j.msec.2016.01.029 ↗
15. Bai L, Hang R, Gao A, Zhang X, Huang X, Wang Y, Tang B, Zhao L, Chu PK (2015) Nanostructured titanium–silver coatings with good antibacterial activity and cytocompatibility fabricated by one-step magnetron sputtering. Appl Surf Sci 355:32–4410.1016/j.apsusc.2015.07.064 ↗
16. Lopes C, Goncalves C, Borges J, Polcar T, Rodrigues MS, Barradas NP, Alves E, Le Bourhis E, Couto FM, Macedo F, Fonseca C, Vaz F (2015) Evolution of the functional properties of titanium-silver thin films for biomedical applications: influence of in-vacuum annealing. Surf Coat Technol 261:262–27110.1016/j.surfcoat.2014.11.020 ↗
17. Velicu I-L, Tiron V, Porosnicu C, Burducea I, Lupu N, Stoian G, Popa G, Munteanu D (2017) Enhanced properties of tungsten thin films deposited with a novel HiPIMS approach. Appl Surf Sci 424:397–40610.1016/j.apsusc.2017.01.067 ↗
18. Yang L, Zhang K, Wen M, Hou ZP, Gong C, Liu XC, Hu CQ, Cui XQ, Zheng WT (2017) Highly hard yet toughened bcc-W coating by doping unexpectedly low B content. Sci Rep 7:935310.1038/s41598-017-09807-9 ↗
19. Fu T, Zhou ZF, Li KY, Shen YG (2005) Characterization of sputter deposited W–Si–N coatings based on α-W structure. Mater Lett 59:618–62310.1016/j.matlet.2004.10.051 ↗
20. Li H, Zheng Y, Pei YT, De Hosson JTM (2014) TiNi shape memory alloy coated with tungsten: a novel approach for biomedical applications. J Mater Sci Mater Med 25:1249–125510.1007/s10856-014-5158-8 ↗
21. Antunes RA, de Lima NB, Rizzutto MdA, Higa OZ, Saiki M, Costa I (2013) Surface interactions of a W-DLC-coated biomedical AISI 316L stainless steel in physiological solution. J Mater Sci Mater Med 24:863–87610.1007/s10856-013-4871-z ↗
22. Mansano RD, Ruas R, Mousinho AP, Zambom LS, Pinto TJA, Amoedo LH, Massi M (2008) Use of diamond-like carbon with tungsten (W-DLC) films as biocompatible material. Surf Coat Technol 202:2813–281610.1016/j.surfcoat.2007.10.012 ↗
23. Swiatek L, Olejnik A, Grabarczyk J, Jedrzejczak A, Sobczyk-Guzenda A, Kaminska M, Jakubowski W, Szymanski W, Bociaga D (2016) Multi-doped diamond like-carbon coatings (DLC-Si/Ag) for biomedical applications fabricated using the modified chemical vapour deposition method. Diam Relat Mater 67:54–6210.1016/j.diamond.2016.03.005 ↗
24. Handzlik P, Fitzner K (2013) Corrosion resistance of Ti and Ti–Pd alloy in phosphate buffered saline solutions with and without H2O2 addition. Trans Nonferrous Met Soc China 23:866–87510.1016/S1003-6326(13)62541-8 ↗
25. Lan W-C, Ou S-F, Lin M-H, Ou K-L, Tsai M-Y (2013) Development of silver-containing diamond-like carbon for biomedical applications. Part I: microstructure characteristics, mechanical properties and antibacterial mechanisms. Ceram Int 39:4099–410410.1016/j.ceramint.2012.10.264 ↗
26. Baba K, Hatada R, Flege S, Ensinger W, Shibata Y, Nakashima J, Sawase T, Morimura T (2013) Preparation and antibacterial properties of Ag-containing diamond-like carbon films prepared by a combination of magnetron sputtering and plasma source ion implantation. Vacuum 89:179–18410.1016/j.vacuum.2012.04.015 ↗
27. Wen SP, Guo JG (2013) Development of arrayed nanoporous Ag/W films by alternate deposition. Mater Technol 28:165–16810.1179/1753555712Y.0000000031 ↗
28. Peng MJ, Yang JJ, Zhang FF, Lu CY, Wang LM, Liao JL, Yang YY, Liu N (2017) Improved irradiation tolerance of W thin films with homogeneously multilayered structure. Surf Coat Technol 313:230–23510.1016/j.surfcoat.2017.01.091 ↗
29. Cloutier M, Tolouei R, Lesage O, Levesque L, Turgeon S, Tatoulian M, Mantovani D (2014) On the long term antibacterial features of silver-doped diamondlike carbon coatings deposited via a hybrid plasma process. Biointerphases 9:02901310.1116/1.4871435 ↗
30. Rebelo R, Calderon SV, Fangueiro R, Henriques M, Carvalho S (2016) Influence of oxygen content on the antibacterial effect of Ag–O coatings deposited by magnetron sputtering. Surf Coat Technol 305:1–1010.1016/j.surfcoat.2016.07.064 ↗
31. Ferreri I, Calderon SV, Escobar Galindo R, Palacio C, Henriques M, Piedade AP, Carvalho S (2015) Silver activation on thin films of Ag–ZrCN coatings for antimicrobial activity. Mater Sci Eng C 55:547–55510.1016/j.msec.2015.05.071 ↗
32. Bociaga D, Jakubowski W, Komorowski P, Sobczyk-Guzenda A, Jedrzejczak A, Batory D, Olejnik A (2016) Surface characterization and biological evaluation of silver-incorporated DLC coatings fabricated by hybrid RF PACVD/MS method. Mater Sci Eng C 63:462–47410.1016/j.msec.2016.03.013 ↗
33. Cloutier M, Turgeon S, Busby Y, Tatoulian M, Pireaux JJ, Mantovani D (2016) Controlled distribution and clustering of silver in Ag-DLC nanocomposite coatings using a hybrid plasma approach. ACS Appl Mater Interfaces 8:21020–2102710.1021/acsami.6b06614 ↗
34. Tung SC, Cheng YT (1993) Microstructures and tribological characteristics of electron-beam co-deposited Ag/Mo thin-film coatings. Wear 162:763–77210.1016/0043-1648(93)90077-Y ↗
35. Tamisari M, Spizzo F, Sacerdoti M, Battaglin G, Ronconi F (2011) Correlation between structural and giant magnetoresistance properties of Fe–Ag nanogranular films. J Nanopart Res 13:5203–521010.1007/s11051-011-0505-x ↗
36. Takahashi M, Notohara Y, Sunakawa Y, Ishio S (1985) Magnetic properties of Co/Cr and Co/Ag layered films. IEEE Transl J Magn Jpn 1:829–83010.1109/TJMJ.1985.4548979 ↗
37. Ponsonnet L, Reybier K, Jaffrezic N, Comte V, Lagneau C, Lissac M, Martelet C (2003) Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour. Mater Sci Eng C 23:551–56010.1016/S0928-4931(03)00033-X ↗
38. Echeverry-Rendon M, Galvis O, Aguirre R, Robledo S, Guillermo Castano J, Echeverria F (2017) Modification of titanium alloys surface properties by plasma electrolytic oxidation (PEO) and influence on biological response. J Mater Sci Mater Med 28:16910.1007/s10856-017-5972-x ↗
39. Fu T, Shen YG, Alajmi Z, Yang SY, Sun JM, Zhang HM (2015) Sol–gel preparation and properties of Ag–TiO2 films on surface roughened Ti–6Al–4V alloy. Mater Sci Technol 31:501–50510.1179/1743284714Y.0000000650 ↗
40. Alajmi Z, Fu T, Zhao YT, Yang SY, Sun JM (2016) Ag-enhanced antibacterial property of MgO film. Mater Sci Forum 859:90–9510.4028/www.scientific.net/MSF.859.90 ↗
41. Loza K, Diendorf J, Sengstock C, Ruiz-Gonzalez L, Gonzalez-Calbet JM, Vallet-Regi M, Koller M, Epple M (2014) The dissolution and biological effects of silver nanoparticles in biological media. J Mater Chem B 2:1634–164310.1039/c3tb21569e ↗
42. Li W-R, Xie X-B, Shi Q-S, Zeng H-Y, Ou-Yang Y-S, Chen Y-B (2010) Antibacterial activity and mechanism of silver nanoparticles on Escherichia coli. Appl Microbiol Biotechnol 85:1115–112210.1007/s00253-009-2159-5 ↗
43. Shrivastava S, Bera T, Roy A, Singh G, Ramachandrarao P, Dash D (2007) Characterization of enhanced antibacterial effects of novel silver nanoparticles. Nanotechnology 18:22510310.1088/0957-4484/18/22/225103 ↗