journal article·2018-07

Interaction between primary dendrite arm spacing and velocity of fluid flow during solidification of Al–Si binary alloys

Hongda Wang, Mohamed S. Hamed, Sumanth Shankar

Journal of Materials Science· Volume 53· Issue 13
Publisher page

Abstract

A new and more efficient numerical algorithm to simulate the solidification of binary metallic alloys, wherein for the first time, the undercooling of the liquidus temperature prior to solidification event and optimized thermo-physical properties was incorporated, has been recently developed and validated by various experiments. Subsequently, experiments were carried out to evaluate the validity of various theoretical models in the literature used to predict the dendrite arm spacing (DAS) and quantify the critical interaction between fluid flow and transient DAS during unsteady state solidification. Typically, models of solidification processes such as casting, welding and galvanizing assume a constant value of fluid flow to predict the DAS and in many cases unable to obtain validation. This practice is erroneous and the transient fluid flow developed during solidification has a significant effect on the transient DAS, thermal gradient (G), solidification velocity (R) and morphology of the mushy zone. The Bouchard–Kirkaldy model (DAS prediction) coupled with the Lehmann model to incorporate fluid flow velocity was the only valid theoretical model in binary alloy solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. JMatPro, version 4.1, Sente Software Ltd., Surrey Technology Centre, Surrey, UK
2. Sekulic DP, Galenko PK, Krivilyov MD, Walker L, Gao F (2005) Dendritic growth in Al–Si alloys during brazing. Part 2: computational modeling. Int J Heat Mass Transf 48:2385–239610.1016/j.ijheatmasstransfer.2005.01.036 ↗
3. Bale CW et al (2016) FactSage thermochemical software and databases—2010-2016. Calphad 54:35-5310.1016/j.calphad.2016.05.002 ↗
4. Gunduz M, Hunt JD (1985) The measurement of solid–liquid surface energies in the Al–Cu, Al–Si and Pb–Sn systems. Acta Metall 33:1651–167210.1016/0001-6160(85)90161-0 ↗
5. Quaresma JMV, Santos CA, Garcia A (2000) Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al–Cu alloys. Metall Mater Trans A 31:3167–317810.1007/s11661-000-0096-0 ↗
6. Shabestari SG, Shahri F (2004) Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy. J Mater Sci Lett 39:2023–203210.1023/B:JMSC.0000017764.20609.0d ↗
7. Bennon WD, Incropera FP (1987) A continuum model for momentum, heat and species transport in binary solid–liquid phase change systems—I. Model formulation. Int J Heat Mass Transf 30:2161–217010.1016/0017-9310(87)90094-9 ↗
8. Bennon WD, Incropera FP (1987) A continuum model for momentum, heat and species transport in binary solid—liquid phase change systems—II. Application to solidification in a rectangular cavity. Int J Heat Mass Transf 30:2171–217810.1016/0017-9310(87)90095-0 ↗
9. Bennon WD, Incropera FP (1988) Numerical analysis of binary solid—liquid phase change using a continuum model. Numer Heat Transf 13:277–29610.1080/10407788808913614 ↗
10. Heinrich JC, Poirier DR (2004) The effect of volume change during directional solidification of binary alloys. Model Simul Mater Sci Eng 12:881–89910.1088/0965-0393/12/5/008 ↗
11. Ho C-J, Viskanta R (1984) Heat transfer during inward melting in a horizontal tube. Int J Heat Mass Transf 27:705–71610.1016/0017-9310(84)90140-6 ↗
12. Krane MJM, Incropera FP (1995) Analysis of the effect of shrinkage on macrosegregation in alloy solidification. Metall Mater Trans A 26A:2329–233910.1007/BF02671247 ↗
13. Magnusson T, Arnberg L (2001) Density and solidification shrinkage of hypoeutectic aluminum–silicon alloys. Metall Mater Trans A 32:2605–261310.1007/s11661-001-0050-9 ↗
14. McBride E, Heinrich JC, Poirier DR (1999) Numerical simulation of incompressible flow driven by density variations during phase change. Int J Numer Meth Fluids 31:787–80010.1002/(SICI)1097-0363(19991115)31:5<787::AID-FLD973>3.0.CO;2-W ↗
15. Voller VR, Prakash C (1987) Fixed grid numerical modeling methodology for convection—diffusion mushy region phase—change problems. Int J Heat Mass Transf 30:1709–171910.1016/0017-9310(87)90317-6 ↗
16. Wang H, Shankar S, Hamed MS (2007) Numerical model for binary alloy solidification. In: 5th international conference on computational heat and mass transfer, Canmore. pp 345–351
17. Xu D, Li Q (1991) Gravity- and solidification-shrinkage-induced liquid flow in a horizontally solidified alloy ingot. Numer Heat Transf Int J Comput Methodol A Appl 20:203–22110.1080/10407789108944817 ↗
18. Yao LS (1984) Natural convection effects in the continuous casting of a horizontal cylinder. Int J Heat Mass Transf 27:697–70410.1016/0017-9310(84)90139-X ↗
19. Ramirez JC, Beckermann C, Karma A, Diepers H-J (2004) Phase-field modeling of binary alloy solidification with coupled heat and solute diffusion. Phys Rev E 69:051607-1–051607-1610.1103/PhysRevE.69.051607 ↗
20. Warren JA, Boettinger WJ, Beckermann C, Karma A (2002) Phase-field simulation of solidification. Annu Rev Mater Sci 32:163–19410.1146/annurev.matsci.32.101901.155803 ↗
21. Beckermann C, Li Q, Tong X (2001) Microstructure evolution in equiaxed dendritic growth. Sci Technol Adv Mater 2:117–12610.1016/S1468-6996(01)00037-7 ↗
22. Elder KR, Grant M, Provatas N, Kosterlitz JM (2001) Sharp interface limits of phase-field models. Phys Rev E (Stat Nonlinear Soft Matter Phys) 64:021604/1–021604/18
23. Provatas N, Goldenfeld N, Dantzig J (1999) Modeling solidification using a phase-field model and adaptive mesh refinement. Solidification 1999. Proceedings. pp 151–160
24. Karma A, Rappel W-J (1996) Phase-field method for computationally efficient modeling of solidification with arbitrary interface kinetics. Phys Rev E (Stat Phys Plasmas Fluids Related Interdiscip Top) 53:R3017–R3020
25. Jeong JH, Goldenfield N, Dantzig JA (2001) Phase field model for three-dimensional growth with fluid flow. Phys Rev E 64:041602-1-1410.1103/PhysRevE.64.041602 ↗
26. Lan CW, Shih CJ (2004) Efficient phase field simulation of a binary dendritic growth in a forced flow. Phys Rev E (Stat Nonlinear Soft Matter Phys) 69:31601-1–31601-10
27. Bouchard D, Kirkaldy JS (1997) Prediction of dendrite arm spacings in unsteady- and steady-state heat flow of unidirectionally solidified binary alloys. Metall Mater Trans B (Process Metall Mater Process Sci) 28B:651–66310.1007/s11663-997-0039-x ↗
28. Lehmann P, Moreaub R, Camela D, Bolcatob R (1998) A simple analysis of the effect of convection on the structure of the mushy zone in the case of horizontal Bridgman solidification. Comparison with experimental results. J Cryst Growth 183:690–70410.1016/S0022-0248(97)00468-5 ↗
29. Peres MD, Siqueira CA, Garcia A (2004) Macrostructural and microstructural development in Al–Si alloys directionally solidified under unsteady-state conditions. J Alloys Compd 381:168–18110.1016/j.jallcom.2004.03.107 ↗
30. Spinelli JE, Peres MD, Garcia A (2005) Thermosolutal convective effects on dendritic array spacings in downward transient directional solidification of Al–Si alloys. J Alloys Compd 403:228–23810.1016/j.jallcom.2005.06.010 ↗
31. Wang H (2009) Solidification simulation of binary Al–Si alloys: prediction of primary dendrite arm spacing with macro-scale simulations (~ 1 mm length scale). Ph.D. Thesis, Department of Mechanical Engineering, McMaster University, Hamilton, Ontario, Canada, Publication A
32. Wang H (2009) Solidification simulation of binary Al–Si alloys: prediction of primary dendrite arm spacing with macro-scale simulations (~ 1 mm length scale). Ph.D. Thesis, Department of Mechanical Engineering, McMaster University, Hamilton, Ontario, Canada, Publication C
33. Hunt JD (1979) Solidification and casting of metals. In: Proceedings of the international conference on solidification and casting of metals. The Metals Society, London. pp 3–9
34. Kurz W, Fisher DJ (1981) Dendritic growth and limit of stability tip radius and spacing. Acta Metall 29:11–2010.1016/0001-6160(81)90082-1 ↗
35. Trivedi R (1984) Interdendritic spacing: part II. A. Comparison of theory and experiment. Metall Trans A (Phys Metall Mater Sci) 15A:977–98210.1007/BF02644689 ↗
36. Steinbach S, Ratke L (2005) The effect of rotating magnetic fields on the microstructure of directionally solidified Al–Si–Mg alloys. Mater Sci Eng A 413–414:200–20410.1016/j.msea.2005.09.010 ↗
37. Flemings MC (1974) Solidification processing. McGraw-hill Book Co, New York
38. Felicelli SD, Heinrich JC, Poirier DR (1991) Simulation of freckles during vertical solidification of binary alloys. Metall Trans B (Process Metall) 22:847–85910.1007/BF02651162 ↗
39. Burden MH, Hunt JD (1974) Cellular and dendritic growth. I. J Cryst Growth 22:99–10810.1016/0022-0248(74)90126-2 ↗
40. Burden MH, Hunt JD (1974) Cellular and dendritic growth. II. J Cryst Growth 22:109–11610.1016/0022-0248(74)90127-4 ↗
41. Carman PC (1937) Fluid flow through granular beds. Trans Inst Chem Eng 15:150–156
42. Carman PC (1938) The determination of the specific surface of powders. I. J Soc Chem Ind 57:225–234
43. Asai S, Muchi I (1978) Theoretical analysis and model experiments of the formation mechanism of channel—type segregation. Trans Iron Steel Inst Jpn 18:290–298