journal article·2001-01

Sinterability of β-SiAlON powder prepared by carbothermal reduction and simultaneous nitridation of ultrafine powder in the Al2O3-SiO2 system

I. J. Davies, T. Minemura, N. Mizutani, M. Aizawa, K. Itatani

Journal of Materials Science· Volume 36· Issue 1
Publisher page

Abstract

Three types of β-SiAlON (Si6 − z Al z O z N8 − z ) powder were prepared by the carbothermal reduction and simultaneous nitridation of ultrafine powders in the Al2O3-SiO2 system. The ultrafine starting oxide powders, prepared using the vapour-phase reaction technique, were mixed with carbon powder and heated at 1400 °C for 1 h under flowing nitrogen to form β-SiAlON and followed by heating at 570 °C for 1 h in air to remove residual carbon. The resulting powders contained only β-SiAlON with z values of 1.63, 2.05, and 2.99. The relative density (bulk density/true density) of β-SiAlON compacts pressureless sintered at 1800 °C for 1 h under flowing nitrogen increased with z and reached 89.9% at z = 2.99. When the β-SiAlON compact with z = 2.99 was hot pressed at 1800 °C for 1 h under flowing nitrogen, a maximum relative density of 93.6% was achieved. Although this hot pressed compact contained a small amount of 15R-SiAlON in addition to β-SiAlON, it possessed a small average grain size (typically 0.5 μm diameter) and high Vickers hardness (19.2 GPa).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. M. L. Torti, in “Treatise on Materials Science and Technology, Vol. 29, ” edited by J. B. Wachtman (Academic Press, London, UK, 1989) p. 161.
2. E. Tani, S. Umebayashi, K. Okuzono, K. Kishi and K. Kobayashi, Yogyo-Kyokai-Shi. 93 (1985) 370.10.2109/jcersj1950.93.1079_370 ↗
3. H. Hofman, U. Vogt, A. Kerber and F. Van Dijen, in Mat. Res. Soc. Symp. Proc. (Materials Research Society, USA, 1993) Vol. 287, p. 105.
4. G. Woetting, H. Feuer and E. Gudel, in Mat. Res. Soc. Symp. Proc. (Materials Research Society, USA, 1993) Vol. 287, p. 133.
5. A. Bellosi and G. N. Babini, in “Key Engineering Materials, Vol. 161–163” (Trans Tech Publications, Switzerland, 1999) p. 203.
6. H. Mandal, D. P. Thompson and T. EkstÖm, in “Third Euro-Ceramics, ” edited by P. Durán and J. F. Fernández (Faenza Editrice Ibérica S.L., Spain, 1993) p. 385.
7. T. Itoh, J. Mater. Sci. Lett. 9 (1990) 19.10.1007/BF00721797 ↗
8. B. W. Jong, G. J. Slavens and D. E. Trault, J. Mater. Sci. 27 (1992) 6086.10.1007/BF01133754 ↗
9. W. R. Schmidt, V. Sukumar, W. J. Hurley, R. Garcia, R. H. Doremus, L. V. Interrante and G. M. Renlund, J. Amer. Ceram. Soc. 73 (1990) 2412.10.1111/j.1151-2916.1990.tb07606.x ↗
10. D. L. Segal, Br. Ceram. Trans. J. 85 (1996) 184.
11. G. Wotting and G. Ziegler, Powder Metall. Int. 18 (1986) 25.
12. S. Hampshire, M. J. Pomeroy and B. Saruhan, in “High Tech Ceramics, ” edited by P. Vincenzini (Elsevier Science Publishers B.V., Amsterdam, The Netherlands, 1987) p. 941.
13. A. Kato, K. Sarugaku and S. Sameshima, in “High Tech Ceramics, ” edited by P. Vincenzini (Elsevier Science Publishers B.V., Amsterdam, The Netherlands, 1987) p. 911.
14. G. Riedel and H. KrÜner, in “Third Euro-Ceramics,Vol. 3, ” edited by P. Durán and J. F. Fernández (Faenza Editrice Ibérica S.L., Spain, 1993) p. 453.
15. K. H. Jack, J. Mater. Sci. 11 (1976) 1135.10.1007/BF02396649 ↗
16. J. W. T. Van Rutten, R. A. Terpstra, J. C. T. Van Der Heijide, H. T. Hintzen and R. Metselaar, J. Europ. Ceram. Soc. 15 (1995) 599.10.1016/0955-2219(95)96866-N ↗
17. J. Zheng and B. Forslund, ibid. 19 (1999) 175.10.1016/S0955-2219(98)00193-9 ↗
18. H. Yoshimatsu, M. Mitomo, H. Mihashi, B. Ohmori and T. Yabuki, Yogyo-Kyokai-Shi. 91 (1983) 442.10.2109/jcersj1950.91.1058_442 ↗
19. H. Yoshimatsu, T. Yabuki and H. Mihashi, ibid. 95 (1987) 590.10.2109/jcersj1950.95.1102_590 ↗
20. M. Hoch and K. M. Nair, J. Amer. Ceram. Soc. 58 (1979) 191.
21. M. Mitomo, T. Shiogai, H. Yoshimatsu and Y. Kitami, Yogyo-Kyokai-Shi. 93 (1985) 364.10.2109/jcersj1950.93.1079_364 ↗
22. K. Itatani, T. Kubozono, F. S. Howell, A. Kishioka and M. Kinoshita, J. Mater. Sci. 30 (1995) 1158.10.1007/BF00356114 ↗
23. Idem., ibid. 30 (1995) 1196.
24. Y. Suyama and A. Kato, J. Amer. Ceram. Soc. 59 (1976) 146.10.1111/j.1151-2916.1976.tb09453.x ↗
25. Powder diffraction file card No. 36–1333 (JCPDS-International Center for Diffraction Data, Swarthmore, PA).
26. Powder diffraction file card No. 41–360 (JCPDS-International Center for Diffraction Data, Swarthmore, PA).
27. Powder diffraction file card No. 35–23 (JCPDS-International Center for Diffraction Data, Swarthmore, PA).
28. Powder diffraction file card No. 15–776 (JCPDS-International Center for Diffraction Data, Swarthmore, PA).
29. M. Mitomo, N. Kuramoto and Y. Yajima, Yogyo-Kyokai-Shi. 88 (1980) 49.10.2109/jcersj1950.88.49 ↗
30. Powder diffraction file card No. 42–160 (JCPDS-International Center for Diffraction Data, Swarthmore, PA).
31. M. Mitomo, N. Kuramoto, Y. Inomata and M. Tsutsumi, Yogyo-Kyokai-Shi. 88 (1980) 489.10.2109/jcersj1950.88.1020_489 ↗
32. T. EkstrÖm, in Mat. Res. Soc. Symp. Proc. (Materials Research Society, USA, 1993) Vol. 287, p. 121.
33. S. Boskovic, K. J. Lee and T. Y. Tien, in Mat. Res. Soc. Symp. Proc. (Materials Research Society, USA, 1993) Vol. 287, p. 373.
34. C. Zhang, W. Y. Sun and D. S. Yan, in “Key Engineering Materials, Vol. 161–163” (Trans Tech Publications, Switzerland, 1999) p. 239.
35. M. Mitomo, T. Shiogai, H. Yoshimatsu and M. Tsutsumi, Yogyo-Kyokai-Shi. 93 (1985) 69.10.2109/jcersj1950.93.1074_69 ↗