journal article·2017-04

Experimental characterization and modeling of misorientations induced by plastic deformation at boundaries of annealing twins in austenitic steel

N. Yu. Zolotorevsky, N. Yu. Ermakova, V. S. Sizova, E. A. Ushanova, V. V. Rybin

Journal of Materials Science· Volume 52· Issue 8
Publisher page

Abstract

The evolution of misorientations at twin boundaries during hot deformations of austenitic steel was studied using electron backscatter diffraction and computer modeling with the purpose to explore the interrelation of this evolution with lattice rotations in grain interior. It was shown that a deformation-induced angular deviation from the initial twin misorientation turns out to be outside Brandon interval at many segments of the boundaries. The length fraction of these segments increases with strain, so that some twin boundaries transform to random ones at all their length. Statistical study shows that the most probable angular deviations are 9° and 13°, while the largest deviations are about 36° and 45° for the strain of 0.36 and 0.7, respectively. The experimental misorientation distributions were compared with theoretical ones computed using Taylor-type model. It was shown that deformation-induced misorientation changes are well described by the theory of polycrystals plasticity. At the same time, a discrepancy with the experiment occurs, which was proposed to be due to non-uniformity of grain lattice rotations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Aernoudt E, Van Houtte P, Leffers T (1993) Deformation and textures of metals at large strain. In: Mughrabi H, Cahn RW, Haasen P, Kramer EJ (eds) Materials science and technology, vol 6. VCH, Weinheim, pp 89–136
2. Rybin VV (1986) Large plastic deformations and fracture of metals. Metallurgiya, Moscow
3. Bay B, Hansen N, Hughes DA, Kuhlmann-Wilsdorf D (1992) Evolution of FCC deformation structured in polyslip. Acta Mater 40:205–21910.1016/0956-7151(92)90296-Q ↗
4. Hughes DA, Hansen N (1997) High angle boundaries formed by grain subdivision mechanisms. Acta Mater 45:3871–388610.1016/S1359-6454(97)00027-X ↗
5. Hurley PJ, Humphreys FJ (2003) The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy. Acta Mater 51:1087–110210.1016/S1359-6454(02)00513-X ↗
6. Cizek P, Whiteman A, Rainforth M (2004) EBSD and TEM investigation of the hot deformation substructure characteristics of a type 316L austenitic stainless steel. J Microsc 213:285–29510.1111/j.0022-2720.2004.01305.x ↗
7. Poddar D, Cizek P, Beladi H, Hodgson PD (2015) Orientation dependence of the deformation microstructure in a Fe-30Ni–Nb model austenitic steel subjected to hot uniaxial compression. Metal and Mater Trans A 46:5933–595110.1007/s11661-015-3182-z ↗
8. Langdon TG (2013) Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement. Acta Mater 61:7035–705910.1016/j.actamat.2013.08.018 ↗
9. Jorge-Badiolga D, Iza-Mendia A, Gutierrez I (2009) EBSD characterization of a hot worked 304 austenitic stainless steel under strain reversal. J Microsc 235:36–4910.1111/j.1365-2818.2009.03179.x ↗
10. Sinha S, Kim D-I, Fleury E, Suwas S (2015) Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel. Mater Sci Eng A 626:175–18510.1016/j.msea.2014.11.053 ↗
11. Salishchev G, Mironov S, Zherebtsov S, Belyakov A (2010) Changes in misorientations of grain boundaries in titanium during deformation. Mater Charact 61:732–73910.1016/j.matchar.2010.04.005 ↗
12. Taylor GI (1938) Plastic strain in metals. J Inst Metals 62:307–324
13. Rybin VV, Zisman AA (1993) Zolotorevsky NY (1993) Junction disclinations in plastically deformed crystals. Acta Metall Mater 41:2211–221710.1016/0956-7151(93)90390-E ↗
14. Raabe D, Zhao Z, Mao W (2002) On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction. Acta Mater 50:4379–439410.1016/S1359-6454(02)00276-8 ↗
15. Toth LS, Estrin Y, Lapovok R, Gu C (2010) A model of grain fragmentation based on lattice curvature. Acta Mater 58:1782–179410.1016/j.actamat.2009.11.020 ↗
16. Joo HD, Kim JS, Kim KH, Tamura N, Koo YM (2004) In situ synchrotron X-ray microdiffraction study of deformation behavior in polycrystalline coppers during uniaxial deformations. Scr Mater 51:1183–118610.1016/j.scriptamat.2004.07.003 ↗
17. Doherty R (1978) Nucleation. In: Haessner F (ed) Recrystallization of metallic materials. Riederer Verlag GmBH, Stuttgart, pp 23–61
18. Taylor AS, Cizek P, Hodgson PD (2012) Orientation dependence of the substructure characteristics in a Ni–30Fe austenitic model alloy deformed in hot plane strain compression. Acta Mater 60:1548–156910.1016/j.actamat.2011.11.048 ↗
19. Taylor AS, Cizek P, Hodgson PD (2011) Comparison of 304 stainless steel and Ni–30 wt% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing. Acta Mater 59:5832–584410.1016/j.actamat.2011.05.060 ↗
20. Van Houtte P, Li S, Seefeldt M, Delannay L (2005) Deformation texture prediction: from the Taylor model to the advanced Lamel model. Int J Plast 21:589–62410.1016/j.ijplas.2004.04.011 ↗
21. Van Houtte P (2009) Crystal plasticity based modeling of deformation textures. In: Haldar A, Suwas S, Bhattacharjee D (eds) Microstructure and texture in steels and other materials. Springer, London, pp 209–22410.1007/978-1-84882-454-6_12 ↗
22. Zisman A, Zolotorevsky N, Ermakova N (2002) Successive selection of active slip systems by the least incompatibility criterion and corresponding texture simulation. Mater Sci Forum 408–412:305–31010.4028/www.scientific.net/MSF.408-412.305 ↗
23. Rybin VV, Zolotorevsky NY, Ushanova EA (2014) Analysis of the misoriented structures in the model copper-copper compound formed by explosion welding. Tech Phys 59:1819–183210.1134/S106378421412024X ↗
24. MacKenzie JK (1958) Second paper on statistics associated with the random orientations of cubes. Biometrical 45:229–24310.1093/biomet/45.1-2.229 ↗
25. Engler O, Randle V (2010) Introduction to texture analysis: macrotexture, microtexture, and orientation mapping, 2nd edn. CRC, New York