Comparison of microstructure and solidification behavior of rapid quenching with bulk undercooled superalloy
Source abstract
Abstract
Microstructure and solidification behavior in rapid quenching (i.e., gas-atomized powders and melt-spun ribbons) of superalloy have been compared with bulk undercooled superalloy. The application of a molten salt denucleating technique combined with thermal cycle enables such investigation over a wide range of undercooling up to 210 K. The microstructure formation has been discussed for both methods of solidification with respect to undercooling, nucleation, and recalescence as well as recrystallization during post-recalescence. Comparison of the observed microstructure and morphologies indicates that the melt-spun ribbons and the gas-atomized powders with cooling rate above 104K sec−1crystallize only after achieving a large degree of undercooling, which becomes higher and higher with the increase of cooling rate. Furthermore, it should be noted that, grain refinements, which play a decisive role in the undercooled as-solidified structure, however, result from different sources in the rapid quenching process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. M. C. Flemings, “Solidification Processing” (McGraw-Hill, NY, 1974).
2. S. Annavarapu and D. D. Doherty, Int.J.Powder Metallurgy 29(4) (1993) 331.
3. W. Kurz and R. Trivedi, Acta Metall. 38(1990) 1.10.1016/0956-7151(90)90129-5 ↗
4. F. Duflos and J. F. Stohr, J.Mater.Sci. 17(1992) 3641.10.1007/BF00752209 ↗
5. Z. Y. Jian, G. C. Yang and Y. H. Zhou, Progress in Natural Science (China) 7(1997) 235.
6. D. L. Li, G. C. Yang and Y. H. Zhou, J.Mater.Sci. 30(1995) 3909.10.1007/BF01153955 ↗
7. D. M. Herlach, B. Feuerbacher and E. Schleip, Mater.Sci.Eng. A133(1991) 790.
8. T. Z. Kattamis, J.Crystal Growth 34(1976) 215.10.1016/0022-0248(76)90132-9 ↗
9. F. Liu, X. F. Guo and G. C. Yang, J.Mater.Sci., accepted.
10. F. Liu, Y. Cai, X. F. Guo and G. C. Yang, Mater.Sci. Eng., Accepted.
11. J. F. Li, G. C. Yang and Y. H. Zhou, Mater.Res.Bull. 33(1998) 141.10.1016/S0025-5408(97)00199-2 ↗
12. W. Du, Ph.D. thesis, Northwestern Polytechnical University, 1998.
13. S. Chakravorty and D. R. F. West, J.Mater.Sci. 19(1984) 3574.10.1007/BF02396929 ↗
14. E. S. Machlin and J. Shao, Metall.Trans. 9A(1978) 561.10.1007/BF02646413 ↗
15. B. Lux, Metal. 35(1981) 1235.
16. M. Gell et al., (ed.), “Superalloy” (ASM, 1984).
17. M. Barth, B. Wei, D. M. Herlach and B. Feuerbacher, Mater.Sci.Eng. A178(1994) 305.10.1016/0921-5093(94)90558-4 ↗
18. E. A. Brandes(ed.), “Smithells Metalls Reference Book,” 6th ed. (Butterworth, Bodmin, 1983).
19. W. J. Boettinger, S. R. Coriell, R. Trivedi, in “Rapid Solidification Processing: Principles and Technologies IV,” edited by R. Mehrabian P. A. Parrish (Claitor's, Baton Rouge, LA, 1988) p. 13.
20. M. J. Aziz, Metall.Mater.Trans. 27A(1996) 671.10.1007/BF02648954 ↗
21. J. Lipton, W. Kurz and R. Trivedi, Acta Metall.Mater. 35(4) (1987) 95710.1016/0001-6160(87)90174-X ↗
22. J. F. Li, Y. C. Liu, Y. L. Lu, G. C. Yang and Y. H. Zhou, J.Crystal growth 192(1998) 462.10.1016/S0022-0248(98)00399-6 ↗
23. T. P. Piccone, Y. Wu, Y. Shiohara and M. C. Flemings, Metall.Trans. 18A(1987) 925.
24. L. Nastac and D. M. Stefanescu, ibid. 27A(1996) 4675.
25. P. Desnain, Y. Fautrelle, J. L. Meyer, J. P. Riquet and F. Durand, Acta Metall.Mater. 38(8) (1990) 1513.10.1016/0956-7151(90)90119-2 ↗
26. N. Matan, H. M. A. Winand, P. Carter, M. Karunaratne, P. D. Bogdanoff and R. C. Reed, ibid. 46(13) (1998) 4587.10.1016/S1359-6454(98)00142-6 ↗
27. S. D. Felicelli, D. R. Poirier and J. C. Heinrich, Metall.Trans. 29B(1998) 847.10.1007/s11663-998-0144-5 ↗
28. A. Karma, Int.J.Non-Equilibrium Processing 11(1998) 201.
29. G. L. F. Powell, Trans.Met.Soc.AIME 245(1969) 1785.
30. G. L. F. Powell and L. M. Hogan, ibid. 242(1968) 2133.
31. R. Mehrabian, in 1st Conference on Rapid Solidification Processing, edited by R. Mehrabian, B. H. Kear and M. Cohen (Claitor's, Baton Rouge, LA, 1978) p. 9.
32. S. C. Hsu, S. Chakravory and R. Mehrabian, Met. Trans. 9B(1978) 1376.
33. L. Kubicar, S. Adamisova, P. Duhaj and D. Janickovic, Mater.Sci.Eng. A173(1993) 367.
34. C. G. Levi and R. Mehrabian, Metall.Trans. 13A(1982) 221.10.1007/BF02643312 ↗