Direct observations of erosion-induced ferroelasticity in EB-PVD thermal barrier coatings
Source abstract
Abstract
Imaging of the presence and location of erosion-induced ferroelastic toughening was completed on 8-weight percent yttria-stabilized zirconia EB-PVD thermal barrier coatings using confocal polarized Raman spectroscopy. A combination of measurements made using ultraviolet and visible laser radiation was conducted to determine the location and extent of ferroelastic twinning present at and below the eroded surfaces as well as along fracture surfaces of the coatings. Ferroelastic twinning events were identified at three major locations within and on the coating: the erosion surface, just below the surface, and in the bulk of the coating. The results shown here reveal that not all fracture events result in a ferroelastic response. This suggests there may be an opportunity to increase the toughness of thermal barrier coatings by increasing the possibility that a crack can produce a ferroelastic twin in the coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Chen X, He MY, Spitsber I, Fleck NA, Hutchinson JW, Evans AG (2004) Mechanisms governing the high temperature erosion of thermal barrier coatings. Wear 256:735–74610.1016/S0043-1648(03)00446-0 ↗
2. Wellman R, Nicholls J (2005) The effect of TBC morphology on the erosion rate of EB-PVD TBCs. Wear 258(1–4):349–35610.1016/j.wear.2004.04.011 ↗
3. Evans AG, Clarke DR, Levi CG (2008) The influence of oxides on the performance of advanced gas turbines. J Euro Ceram Soc 28(7):1405–141910.1016/j.jeurceramsoc.2007.12.023 ↗
4. Clarke DR, Levi CG (2003) Materials design for the next generation thermal barrier coatings. Ann Rev Mat Res 3:383–41710.1146/annurev.matsci.33.011403.113718 ↗
5. Levi CG (2004) Emerging materials and processes for thermal barrier systems. Curr Opin Solid State Mater Sci 8(1):77–9110.1016/j.cossms.2004.03.009 ↗
6. Stiger MJ, Yanar NM, Topping MG, Pettit FS, Meier GH (1999) Thermal barrier coatings for the 21st century. Z MetaIlkd 90(12):1069–1078
7. Choi SR, Bansal NP, Zhu DM (2005) Mechanical and thermal properties of advanced oxide materials for higher-temperature coatings applications. In: Zhu D, Plucknett K (eds) Advances in ceramic coatings and ceramic-metal systems, vol 26., Ceramic engineering and science proceedingsAm. Ceram. Soc, Westerville, pp 11–1910.1002/9780470291238.ch2 ↗
8. Padture NP, Gell M, Jordan EH (2002) Materials science-thermal barrier coatings for gas-turbine engine applications. Science 296(5566):280–28410.1126/science.1068609 ↗
9. Beele W, Marijnissen G, Van Lieshout A (1999) The evolution of thermal barrier coatings-status and upcoming solutions for today’s key issues. Surf Coat Technol 120:61–6710.1016/S0257-8972(99)00342-4 ↗
10. Miller RA (1987) Current status of thermal barrier coatings-an overview. Surf Coat Technol 30(1):1–1110.1016/0257-8972(87)90003-X ↗
11. Cao XQ, Vassen R, Stoever D (2004) Ceramic materials for thermal barrier coatings. J Euro Ceram Soc 24(1):1–1010.1016/S0955-2219(03)00129-8 ↗
12. Evans AG, Fleck NA, Faulhaber S, Vermaak N, Maloney M, Darolia R (2006) Scaling laws governing the erosion and impact resistance of thermal barrier coatings. Wear 260:886–89410.1016/j.wear.2005.05.005 ↗
13. Toriz F, Thakker A, Gupta DK (1989) Flight service evaluation of thermal barrier coatings by physical vapor depositions at 5200 hours. Surf Coat Technol 39–40:161–17210.1016/0257-8972(89)90051-0 ↗
14. Chen X, Wang R, Yao N, Evans AG, Hutchinson JW, Bruce RW (2003) Foreign object damage in a thermal barrier system: mechanisms and simulations. Mater Sci Eng A 352(1-2):221–23110.1016/S0921-5093(02)00905-X ↗
15. Wellman RG, Nicholls JR (2000) Some observations on erosion mechanisms of EB-PVD TBCs. Wear 242(1-2):89–9610.1016/S0043-1648(00)00391-4 ↗
16. Stecura S (1979) Effect of compositional changes on the performance of thermal barrier coatings system. In NASA Technical Memorandum 78976. NASA, Lewis Research Center Cleveland, OH
17. Maloney M (2000) Thermal barrier coating systems and materials, US Patent No. 6117560, USA
18. Zhu DM, Miller RA (1998) Sintering and creep behavior of plasma-sprayed zirconia- and hafnia-based thermal barrier coatings. Surf Coat Technol 108(1-3):114–120
19. Barsoum M (2003) Fundamentals of ceramics Institute of Physics Publishing. Bristol, UK10.1887/0750309024 ↗
20. Manson S, Halford G (2006) Fatigue and durability of structural materials. ASM International, USA, p 45610.31399/asm.tb.fdsm.9781627083447 ↗
21. Green D, Hannink RHJ, Swain M (1989) Transformation toughening of ceramics. CRC Press, Boca Raton, FL
22. Kelly P, Rose L (2002) The martensitic transformation in ceramics-its role in transformation toughening. Prog Mater Sci 47(5):463–55710.1016/S0079-6425(00)00005-0 ↗
23. Evans AG (1990) Perspective on the development of high-toughness ceramics. J Am Ceram Soc 73(2):187–20610.1111/j.1151-2916.1990.tb06493.x ↗
24. Mercer C, Williams JR, Clarke DR, Evans AG (2007) On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime (t’) yttria-stabilized zirconia. Proc R Soc A 463(2081):1393–140810.1098/rspa.2007.1829 ↗
25. Chan CJ, Lange FF, Ruhle M, Jue JF, Virkar AV (1991) Ferroelastic domain switching in tetragonal zirconia in Defects. In: Bristowe PD, Epperson JE, Griffith JE, Lilientalweber Z (eds) Materials, vol 209., Materials research society symposium proceedingsMaterials Research Soc, Pittsburgh, pp 725–730
26. Garvie RC, Hannink RH, Pascoe RT (1975) Ceramic steel? Nature 258(5537):703–70410.1038/258703a0 ↗
27. Marshall D (1986) Strength characteristics of transformation-toughened zirconia. J Am Ceram Soc 69(3):173–18010.1111/j.1151-2916.1986.tb07402.x ↗
28. Porter D, Evans AG, Heuer AH (1979) Transformation-toughening in partially-stabilized zirconia (PSZ). Acta Met 27:1649–165410.1016/0001-6160(79)90046-4 ↗
29. Porter D, Heuer AH (1977) Mechanisms of toughening partially stabilized zirconia (PSZ). J Am Ceram Soc 60(3-4):183–18410.1111/j.1151-2916.1977.tb15509.x ↗
30. Virkar AV, Matsumoto RLK (1986) Ferroelastic domain switching as a toughening mechanism in tetragonal zirconia. J Am Ceram Soc 69(10):C224–C22610.1111/j.1151-2916.1986.tb07341.x ↗
31. Becher P (1991) Microstructural design of toughened ceramics. J Am Ceram Soc 74(2):255–26910.1111/j.1151-2916.1991.tb06872.x ↗
32. Basu B (2005) Toughening of yttria-stabilized tetragonal zirconia ceramics. Int Mat Rev 50(4):239–25610.1179/174328005X41113 ↗
33. Raddatz O, Schneider G, Mackens W, Voss H, Claussen N (2000) Bridging stresses and R-curves in ceramic/metal composites. J Euro Ceram Soc 20(13):2261–227310.1016/S0955-2219(00)00065-0 ↗
34. Lawn B (1998) Indentation of ceramics with spheres: a century after Hertz. J Am Ceram Soc 81(8):1977–199410.1111/j.1151-2916.1998.tb02580.x ↗
35. Lawn B (2004) Fracture and deformation in brittle solids: a perspective on the issue of scale. J Mater Res 19(1):22–2910.1557/jmr.2004.19.1.22 ↗
36. Srinivasan GV, Jue JF, Kuo SY, Virkar AV (1989) Ferroelastic domain switching in polydomain tetragonal zirconia single-crystals. J Am Ceram Soc 72(11):2098–210310.1111/j.1151-2916.1989.tb06038.x ↗
37. Arlt G (1990) Twinning in ferroelectric and ferroelastic ceramics-stress relief. J Mat Sci 25(6):2655–2666. doi: 10.1007/BF0058486410.1007/BF00584864 ↗
38. Sapriel J (1975) Domain-wall orientations in ferroelastics. Phys Rev B 12(11):5128–514010.1103/PhysRevB.12.5128 ↗
39. Messerschmidt U, Baither D, Baufeld B, Bartsch M (1997) Plastic deformation of zirconia single crystals: a review. Mater Sci Eng A 233(1–2):61–7410.1016/S0921-5093(97)00050-6 ↗
40. Bolon A, Gentleman MM (2011) Raman spectroscopic observations of ferroelastic switching in ceria stabilized zirconia. J Am Ceram Soc 94(12):4478–448210.1111/j.1551-2916.2011.04737.x ↗
41. Bolon A, Sisneros T, Schubert A, Clausen B, Brown D, Gentleman MM (2014) Comparison of neutron diffraction and Raman spectroscopic studies of the ferroelastic behavior of ceria-stabilized zirconia at elevated temperatures. J Euro Ceram Soc 35(2):623–62910.1016/j.jeurceramsoc.2014.09.013 ↗
42. Schultz U, Schmucker M (2000) Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD. Mater Sci Eng A 276(1-2):1–810.1016/S0921-5093(99)00576-6 ↗
43. Wellman RG, Deakin MJ, Nicholls JR (2005) The effect of TBC morphology and aging on the erosion rate of EB-PVD TBCs. Trib Int 38(9):798–80410.1016/j.triboint.2005.02.008 ↗
44. Wood D, Nassau K (1982) Refractive index of cubic zirconia stabilized with yttria. Appl Opt 21(16):2978–298110.1364/AO.21.002978 ↗
45. Gentleman MM, Clarke DR (2004) Concepts for luminescence sensing of thermal barrier coatings. Surf Coat Technol 188:93–10010.1016/j.surfcoat.2004.08.005 ↗
46. Limarga AM, Clarke DR (2007) Piezo-spectroscopic coefficients of tetragonal-prime ytria-stabilized zirconia. J Am Ceramic Soc 90(4):1272–127510.1111/j.1551-2916.2007.01622.x ↗