journal article·2016-04

One-pot synthesis of inorganic/organic hybrid membranes from organoalkoxysilane, hydroimidazole derivative, and cyclic sulfonic acid ester

Koji Takahashi, Junji Umeda, Koichiro Hayashi, Wataru Sakamoto, Toshinobu Yogo

Journal of Materials Science· Volume 51· Issue 7
Publisher page

Abstract

Inorganic/organic hybrid membranes for use in fuel cells were synthesized from 3-glycidoxypropyltrimethoxysilane (GPTMS), N-(3-triethoxysilylpropyl)-4,5-dihydroimidazole (NESPHI), and 1,3-propanesultone (PS) through a simple one-pot process. Fourier transform infrared spectroscopy and 13C nuclear magnetic resonance (NMR) measurements confirmed the sultone ring-opening reaction and formation of chemical bonds among the starting materials. The 29Si NMR measurements revealed that a siloxane network had formed within the hybrid membranes via the sol–gel process. The thermogravimetric analysis indicated that the synthesized membranes were thermally stable up to 170 °C. The conductivity of the membranes at low levels of relative humidity (RH) was improved by the addition of NESPHI. The best cell performance at intermediate temperatures and low RHs was achieved by the membrane electrode assembly using the NESPHI/GPTMS/PS = 1:3:4 hybrid membrane with a catalyst ink consisting of Nafion and the hybrid solution at a 1:1 ratio. At 120 °C and 53 % RH, the power density of the NESPHI/GPTMS/PS = 1:3:4 membrane was 6.6 mW/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Cacciola G, Antonucci V, Freni S (2001) Technology up date and new strategies on fuel cells. J Power Sour 100:67–7910.1016/S0378-7753(01)00884-9 ↗
2. Winter U, Weidner H (2003) Hydrogen for the mobility of the future results of GM/Opel’s well-to-wheel studies in North America and Europe. Fuel Cells 3:76–8310.1002/fuce.200332105 ↗
3. Aparicio M, Duran A (2004) Hybrid organic/inorganic sol-gel materials for proton conducting membranes. J Sol-Gel Sci Technol 31:103–10710.1023/B:JSST.0000047969.56298.d7 ↗
4. Wieser C (2004) Novel polymer electrolyte membranes for automotive applications—requirements and benefits. Fuel Cells 4:245–25010.1002/fuce.200400038 ↗
5. Li Q, He R, Jensen JO, Bjerrum NJ (2003) Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 °C. Chem Mater 15:4896–491510.1021/cm0310519 ↗
6. Thakur VK, Thakur MK (2014) Recent advances in graft copolymerization and applications of chitosan: a review. ACS Sustain Chem Eng 2:2637–265210.1021/sc500634p ↗
7. Thakur VK, Kessler MR (2015) Self-healing polymer nanocomposite materials: a review. Polymer 69:369–38310.1016/j.polymer.2015.04.086 ↗
8. Thakur VK, Ding G, Ma J, Lee PS, Lu X (2012) Hybrid materials and polymer electrolytes for electrochromic device applications. Adv Mater 24:4071–409610.1002/adma.201200213 ↗
9. Said A, Daou TJ, Limousy L, Bikai J, Halwani J, Toufaily J, Hamieh T, Dutournie P (2015) Surface energy modification of a Na-mordenite thin layer treated by an alkaline solution. Mater Exp 5:451–45610.1166/mex.2015.1253 ↗
10. Li J, Gao J, Sui G, Jia L, Zuo C, Deng Q (2014) Influence of a glycerin additive on the structure and water vapor permeance of chitosan membranes. Mater Exp 4:491–49810.1166/mex.2014.1200 ↗
11. Adjemian KT, Dominey R, Krishnan L et al (2006) Function and characterization of metal oxide–nafion composite membranes for elevated-temperature H2/O2 PEM fuel cells. Chem Mater 18:2238–224810.1021/cm051781b ↗
12. Peighambardoust SJ, Rowshanzamir S, Amjadi M (2010) Review of the proton exchange membranes for fuel cell applications. Intern J Hydrog Energy 35:9349–938410.1016/j.ijhydene.2010.05.017 ↗
13. Mishra AK, Bose S, Kuila T, Kim NH, Lee JH (2012) Silicate-based polymer-nanocomposite membranes for polymer electrolyte membrane fuel cells. Progress Polym Sci 37:842–86910.1016/j.progpolymsci.2011.11.002 ↗
14. Iulianelli A, Basile A (2012) Sulfonated PEEK-based polymers in PEMFC and DMFC applications: a review. Intern J Hydrog Energy 37:15241–1525510.1016/j.ijhydene.2012.07.063 ↗
15. Tripathi BP, Shahi VK (2011) Organic-inorganic nanocomposite polymer electrolyte membranes for fuel cell applications. Progress Polym Sci 36:945–97910.1016/j.progpolymsci.2010.12.005 ↗
16. Asensio JA, Sanchez EM, Gomez-Romero P (2010) Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest. Chem Soc Rev 39:3210–323910.1039/b922650h ↗
17. Li Q, Jensena JO, Savinell RF, Bjerrum NJ (2009) High temperature proton exchange membranes based on polybenzimidazoles for fuel cells. Progress Polym Sci 34:449–47710.1016/j.progpolymsci.2008.12.003 ↗
18. Zhang HW, Shen PK (2012) Recent development of polymer electrolyte membranes for fuel cells. Chem Rev 112:2780–283210.1021/cr200035s ↗
19. Robert CL, Vallé K, Pereira F, Sanchez C (2011) Design and properties of functional hybrid organic–inorganic membranes for fuel cells. Chem Soc Rev 40:961–100510.1039/c0cs00144a ↗
20. Tokuda Y, Yamada T, Takahashi M, Yoko T, Kitagawa H, Ueda Y (2011) Structure manufacturing of proton-conducting organic–inorganic hybrid silicophosphite membranes by solventless synthesis. J Mater Res 26:796–80310.1557/jmr.2010.89 ↗
21. Sel O, Azais T, Maréchal M, Gébel G, Robert CL, Sanchez C (2011) Sulfonic and phosphonic acid and bifunctional organic–inorganic hybrid membranes and their proton conduction properties. Chem Asian J 6:2992–300010.1002/asia.201100220 ↗
22. Xue Y, Fu R, Wu C, Lee JY, Xu T (2010) Acid–base hybrid polymer electrolyte membranes based on SPEEK. J Membr Sci 350:148–15310.1016/j.memsci.2009.12.022 ↗
23. Pezzin SH, Stock N, Shishatskiy S, Nunes SP (2008) Modification of proton conductive polymer membranes with phosphonated polysilsesquioxanes. J Membr Sci 325:559–56910.1016/j.memsci.2008.08.010 ↗
24. Licoccia S, Di Vona ML, D’Epifanio A, Ahmed Z, Bellitto S, Marani D, Mecheri B, de Bonis C, Trombetta M, Traversa E (2007) SPPSU-based hybrid proton conducting polymeric electrolytes for intermediate temperature PEMFCs. J Power Sour 167:79–8310.1016/j.jpowsour.2007.01.071 ↗
25. Di Vona ML, Marani D, D’Ottavi C, Trombetta M, Traversa E, Beurroies I, Knauth P, Licoccia S (2006) A simple new route to covalent organic/inorganic hybrid proton exchange polymeric membranes. Chem Mater 18:69–7510.1021/cm051546t ↗
26. Li S, Zhou Z, Abernathy H, Liu M, Li W, Ukai J, Hase K, Nakanishi M (2006) Synthesis and properties of phosphonic acid-grafted hybrid inorganic-organic polymer membranes. J Mater Chem 16:858–86410.1039/B512389E ↗
27. Tezuka T, Tadanaga K, Matsuda A, Hayashi A, Tatsumisago M (2005) Utilization of glass papers as a support for proton conducting inorganic-organic hybrid membranes from 3-glycidoxypropyl-trimethoxysilane, tetraalkoxysilane and orthophosphoric acid. Solid State Ion 176:3001–300410.1016/j.ssi.2005.09.039 ↗
28. Quartarone E, Mustarelli P, Carollo A, Grandi S, Magistris A, Gerbaldi C (2009) PBI composite and nanocomposite membranes for PEMFCs: the role of the filler. Fuel Cells 9:231–23610.1002/fuce.200800145 ↗
29. Thanganathan U, Dixon D, Ghatty SL, Rambabu B (2012) Development of non-perfluorinated hybrid materials for single-cell proton exchange membrane fuel cells. Intern J Hydrog Energy 37:17180–1719010.1016/j.ijhydene.2012.08.082 ↗
30. Umeda J, Moriya M, Sakamoto W, Yogo T (2009) Synthesis of proton conductive inorganic-organic hybrid membrane from organoalkosysilane and hydroxyalkylphosphonic acid. J Membr Sci 326:701–70710.1016/j.memsci.2008.11.005 ↗
31. Umeda J, Suzuki M, Kato M, Moriya M, Sakamoto W, Yogo T (2010) Proton conductive inorganic-organic hybrid membranes functionalized with phosphonic acid for polymer electrolyte fuel cell. J Power Sour 195:5882–588810.1016/j.jpowsour.2009.12.078 ↗
32. Çelik SÜ, Aslan A, Bozkurt A (2008) Phosphoric acid-doped poly(1-vinyl-1,2,4-triazole) as water-free proton conducting polymer electrolytes. Solid State Ion 179:683–68810.1016/j.ssi.2008.04.033 ↗
33. Lee SY, Ogawa A, Kanno M, Nakamoto H, Yasuda T, Watanabe M (2010) Nonhumidified intermediate temperature fuel cells using protic ionic liquids. J Am Chem Soc 132:9764–977310.1021/ja102367x ↗
34. Rana UA, Forsyth M, MacFarlane DR, Pringle JM (2012) Toward protic ionic liquid and organic ionic plastic crystal electrolytes for fuel cells. Electrochim Acta 84:213–22210.1016/j.electacta.2012.03.058 ↗
35. Rhee CH, Kim Y, Lee JS, Kim HK, Chang H (2006) Nanocomposite membranes of surface-sulfonated titanate and Nafion for direct methanolfuel cells. J Power Sour 195:1015–102410.1016/j.jpowsour.2005.12.006 ↗
36. Kim Y, Lee JS, Rhee CH, Kim HK, Chang H (2006) Montmorillonite functionalized with perfluorinated sulfonic acid for proton-conducting organic-inorganic composite membranes. J Power Sour 162:180–18510.1016/j.jpowsour.2006.07.041 ↗
37. Choi Y, Kim Y, Kim HK, Lee JS (2010) Direct synthesis of sulfonated mesoporous silica as inorganic fillers of proton-conducting organic-inorganic composite membranes. J Membr Sci 357:199–20510.1016/j.memsci.2010.04.024 ↗
38. Tripathi BP, Shahi VK (2009) 3-[[3-(Triethoxysilyl)propyl]amino]propane-1-sulfonic acid-poly(vinyl alcohol) cross-linked zwitterionic polymer electrolyte membranes for direct methanol fuel cell applications. ACS Appl Mater Interface 1:1002–101210.1021/am800228s ↗
39. Silverstein RM, Webster FX, Kiemle DJ (2005) Spectrometric identification of organic compounds, 7th edn. Wiley, New York, pp 72–126–204–244
40. Sugahara Y, Okada S, Sato S, Kuroda K, Kato C (1994) 29Si-NMR study of hydrolysis and initial polycondensation processes of organoalkoxysilanes. II. Methyltriethoxysilane. J Non-Cryst Solid 167:21–2810.1016/0022-3093(94)90362-X ↗
41. Kreuer KD, Fuchs A, Ise M, Spaeth M, Maier J (1998) Imidazole and pyrazole-based proton conducting polymers and liquids. Electrochim Acta 43:1281–128810.1016/S0013-4686(97)10031-7 ↗
42. Münch W, Kreuer KD, Silvestri W, Maier J, Seifert G (2001) The diffusion mechanism of an excess proton in imidazole molecule chains: first results of an ab initio molecular dynamics study. Solid State Ion 145:437–44310.1016/S0167-2738(01)00941-9 ↗
43. Jin Y, Qiao S, Diniz da Costa JC, Wood BJ, Ladewig BJ, Lu GQ (2007) Hydrolytically stable phodphorilated hybrid silicas for proton conduction. Adv Funct Mater 17:3304–331110.1002/adfm.200700350 ↗
44. Jorcin JB, Orazem ME, Pebere N, Tribollet B (2006) CPE analysis by local electrochemical impedance spectroscopy. Electrochim Acta 51:1473–147910.1016/j.electacta.2005.02.128 ↗
45. Lvovich VF (2012) Impedance spectroscopy. Wiley, New York, pp 37–4710.1002/9781118164075.ch3 ↗
46. van Westing EPM, Ferrari GM, de Wit JHW (1993) The determination of coating performance with impedance measurements-I. Coating polymer properties. Corros Sci 34:1511–153010.1016/0010-938X(93)90245-C ↗
47. Holdcroft S (2014) Fuel cell catalyst layers: a polymer science perspective. Chem Mater 26:381–39310.1021/cm401445h ↗
48. Mauritz KA, Moore RB (2004) State of understanding of Nafion. Chem Rev 104:4535–458510.1021/cr0207123 ↗
49. Besse S, Capron P, Diat O, Gebel G, Jousse F, Marsacq D, Pineri M, Marestin C, Mercier R (2002) Sulfonated polyimides for fuel cell electrode membrane assemblies. J New Mater Electrochem Syst 5:109–112
50. Reshetenko TV, Kim HT, Krewer U, Kweon HJ (2007) The effect of the anode loading and method of MEA fabrication on DMFC performance. Fuel Cells 3:238–24510.1002/fuce.200600030 ↗
51. Chun YG, Kim CS, Peck DH, Shin DR (1998) Performance of polymer electrolyte membrane fuel cell with thin film catalyst electrode. J Power Sour 71:174–17810.1016/S0378-7753(97)02792-4 ↗