Investigation of the electrophoretic deposition behaviour of non-aqueous ceramic suspensions
Source abstract
Abstract
The topic of the investigations was the electrophoretic shaping of AlN, SiC and Al2O3, respectively, using ethanolic suspensions of the powders. Suitable organic additives were chosen for achieving an effective suspension stabilisation and a sufficiently high electrophoretic mobility of the particles, which are the basic requirements for a successful electrophoretic deposition. Most of the EPD experiments were carried out in the direction of the gravitational force. Either the voltage or the current was kept constant during the deposition. In the case of the EPD of AlN, the dependence of the deposit mass on the experimental parameters has been investigated in detail and explained on the basis of changes in the effective electric field strength. Several factors influencing the effective field strength are discussed in this paper. By EPD from the different suspensions, green bodies with monomodal pore size distributions reflecting a high homogeneity of the particle packing were produced. It was shown that by the simultaneous deposition of non-oxide powders and sintering additives from suspensions with high solid contents deposits with a homogeneous distribution of the sintering additive can be obtained, whereas in diluted suspensions different electrophoretic mobilities cause a separation of the components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Sarkar P, Nicolson PS (1996) J Am Ceram Soc 79(8):198710.1111/j.1151-2916.1996.tb08929.x ↗
2. Gani MSJ (1994) Ind Ceram 14(4):163
3. Van Der Biest O, Vandeperre LJ (1999) Annu Rev Mater Sci 29:32710.1146/annurev.matsci.29.1.327 ↗
4. Boccaccini AR, Kaya C, Chawla KK (2001) Composites Part A 32:99710.1016/S1359-835X(00)00168-8 ↗
5. Boccaccini AR, Zhitomirsky I (2005) Interceram 54(3):162
6. Hunter RJ (1991) Foundations of colloid science. Oxford University Press, New York, pp 557
7. Hamaker HC (1940) Trans Faraday Soc 36:27910.1039/tf9403500279 ↗
8. Fukada Y et al (2004) J Mater Sci 39:78710.1023/B:JMSC.0000012906.70457.df ↗
9. Kerkar AV, Rice RW, Spotnitz RM (1993) US Patent No. 5,194,129
10. Uchikoshi T et al (2001) J Mater Res 16:32110.1557/JMR.2001.0048 ↗
11. Clasen R (1989) Proceedings of the 2nd International Conference on ceramic powder processing science, Berchtesgaden, October 1989, edited by Messing GL, Hirano S, DKG, Köln, p 633
12. Tabellion J, Clasen R (2004) J Mater Sci 39:80310.1023/B:JMSC.0000012907.52051.fb ↗
13. Oetzel CH, Clasen R, Tabellion J (2004) cfi/Ber DKG 81(4):E35
14. Moritz K, Müller E (2002) Key engineering materials Vols. 206–213. Trans Tech Publications, Switzerland, p 193
15. Vandeperre L et al (1997) J Europ Ceram Soc 17:37310.1016/S0955-2219(96)00106-9 ↗
16. Moritz K (1998) PhD thesis, TU Bergakademie Freiberg, Germany
17. Müller E, Dittrich R, Moritz K (2004) Adv Eng Mat 6(7):56810.1002/adem.200400404 ↗
18. Reetz T, Mönch B, Saupe M (1992) cfi/Ber DKG 69(11/12):464
19. Meisel RL (1994) PhD thesis, Saarland University, Saarbrücken/Germany
20. Bonnas S, Tabellion J, Hausselt J (2006) Key engineering materials Vol. 314. Trans Tech Publications, Switzerland, p 69
21. Moritz K, Müller E (1998) in “Ceramic Processing Science”, Ceramic Transactions Vol. 83, USA, p 265