Effects of SWCNTs on mechanical and thermal performance of epoxy at elevated temperatures
Source abstract
Abstract
A property which limits the breadth of application of thermoset polymers and their composites is their relatively low maximum operating temperatures. This work investigates the potential application of both functionalized single-walled carbon nanotubes (f-SWCNTs) based on negative charging, and unfunctionalized SWCNTs (u-SWCNTs) to increase the mechanical and thermal performance of a high-temperature aerospace-grade epoxy with a glass transition temperature of approximately 270 °C. Thermal and mechanical properties of the baseline epoxy and nanocomposites containing a low content of SWCNTs (0.2 % by weight) were characterized through thermogravimetric analyses, tensile tests, and dynamic mechanical analyses. Tensile tests were performed both at room temperature and at 80 °C. Further, room temperature tensile tests were performed on untreated and heat-treated specimens. The heat treatment was performed at 300 °C, slightly above the resin glass transition temperature. Results demonstrate that f-SWCNTs are effective in improving the mechanical and thermal performance of the epoxy. No significant improvement was observed for u-SWCNT nanocomposites. For the nanocomposite with f-SWCNTs, the ultimate tensile strength and strain to failure at room temperature (80 °C) increased by 20 % (8 %) and 71 % (77 %), respectively, as compared to the baseline epoxy. The f-SWCNT nanocomposite, unlike other examined materials, exhibited a stress–strain necking behavior at 80 °C, an indication of increased ductility. After heat treatment, these properties further improved relative to the neat epoxy (160 % increase in ultimate tensile strength and 270 % increase in strain to failure). This work suggests the potential to utilize f-SWCNTs based on negative charging to enhance high-temperature thermoset performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Coleman JN, Khan U, Blau WJ, Gun’ko YK (2006) Carbon 44:162410.1016/j.carbon.2006.02.038 ↗
2. Kumar AP, Depan D, Tomer NS, Singh RP (2009) Prog Polym Sci 34:47910.1016/j.progpolymsci.2009.01.002 ↗
3. Costache MC, Wang D, Heidecker MJ, Manias E, Wilkie CA (2006) Polym Adv Technol 17:27210.1002/pat.697 ↗
4. Li J, Tong L, Fang Z, Gu A, Xu Z (2006) Polym Degrad Stab 91:204610.1016/j.polymdegradstab.2006.02.001 ↗
5. Yang K, Gu M, Jin Y (2008) J Appl Polym Sci 110:298010.1002/app.28898 ↗
6. Seyhan AT, De la Vega A, Tanoglu M, Schulte K (2009) J Polym Sci: Part B 47:151110.1002/polb.21755 ↗
7. Moniruzzaman M, Winey KI (2006) Macromolecules 39:519410.1021/ma060733p ↗
8. Zhou Y, Pervin F, Lewis L, Jeelani S (2007) Mater Sci Eng A 452–453(15):65710.1016/j.msea.2006.11.066 ↗
9. Ma PC, Kim JK, Tang BZ (2007) Compos Sci Technol 67(14):296510.1016/j.compscitech.2007.05.006 ↗
10. Kingston CT, Jakubek ZJ, Denommee S, Simard B (2004) Carbon 42:165710.1016/j.carbon.2004.02.020 ↗
11. Spitalsky Z, Tasis D, Papagelis K, Galiotis C (2010) Prog Polym Sci 35:35710.1016/j.progpolymsci.2009.09.003 ↗
12. Coleman JN, Khan U, Blau WJ, Gun’ko YK (2006) Carbon 44:162410.1016/j.carbon.2006.02.038 ↗
13. Martinez-Rubi Y, Ashrafi B, Guan J, Kingston C, Johnston A, Simard B, Mirjalili V, Hubert P, Deng L, Young RJ (2011) ACS Appl Mater Interfaces 3:230910.1021/am200523z ↗
14. Penicaud A, Poulin P, Derre A, Anglaret E, Petit P (2005) J Am Chem Soc 127:810.1021/ja0443373 ↗
15. Martínez-Rubí Y, Guan J, Lin S, Scriver C, Sturgeon RE, Simard B (2007) Chem Commun 48:514610.1039/b712299c ↗
16. American Society for Testing and Materials (2008) Standard test method for tensile properties of plastics. ASTM D638
17. Kim JY, Kim SH (2006) J Polym Sci Part B: Polym Phys 44(7):106210.1002/polb.20728 ↗
18. Hubert P, Ashrafi B, Adhikari K, Meredith J, Vengallatore S, Guan J, Simard B (2009) Compos Sci Technol 69:227410.1016/j.compscitech.2009.04.023 ↗
19. Becker P, Varley R, Simon G (2002) Polymer 43:436510.1016/S0032-3861(02)00269-0 ↗
20. Varley RJ, Hodgkin, Simon GP (2000) J Appl Polym Sci 77:23710.1002/(SICI)1097-4628(20000711)77:2<237::AID-APP1>3.0.CO;2-5 ↗
21. Chen ZK, Yang JP, Ni QQ, Fu SY, Huang YG (2009) Polymer 50(19):475310.1016/j.polymer.2009.08.001 ↗
22. Yang JP, Chen ZK, Feng QP, Deng YH, Liu Y, Ni QQ, Fu SY (2012) Compos Part B: Eng 43(1):22 ISSN 1359-836810.1016/j.compositesb.2011.04.025 ↗