Fabrication of Al/TiB2 composites through gas pressure infiltration
Source abstract
Abstract
Titanium diboride is being evaluated as a replacement of SiC in metal/ceramic composites for thermal management. Albeit these composites are produced by gas pressure infiltration, no study of the process is available. This work presents an analysis of the threshold pressure for infiltration of Al into TiB2 compacts and of the infiltration kinetics. Particles of diameters 14 and 20 μm, and spans of 1.62 and 1.77, were packed obtaining a volume fraction of 0.63. The compacts were infiltrated in air with pure Al at 700 °C. Despite of the fact that the average particle radii differ in a 50%, the threshold pressure for the coarser particles is only a 4% lower, while intrinsic compact permeabilities (derived from infiltration of a wetting organic liquid) are identical. The origin of this apparently odd behavior is the almost identical specific surface areas that those two particles have. Contact angles derived from infiltration experiments are shown to be compatible with sessile drop results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Basu B, Raju GB, Suri AK (2006) Int Mater Rev 51:35210.1179/174328006X102529 ↗
2. Munro RG (2000) J Res Natl Inst Stand Technol 105:70910.6028/jres.105.057 ↗
3. Gordon FH, Turner SP, Taylor R, Clyne TW (1994) Composites 25:58310.1016/0010-4361(94)90188-0 ↗
4. Subramanian C, Murthy TSRCh, Suri AK (2007) Refract Metals Hard Mater 25:34510.1016/j.ijrmhm.2006.09.003 ↗
5. Garcia-Cordovilla C, Louis E, Narciso J (1999) Acta Mater 47:446110.1016/S1359-6454(99)00318-3 ↗
6. Molina JM, Piñero E, Narciso J, García-Cordovilla C, Louis E (2005) Curr Opin Solid State Mater Sci 9:20210.1016/j.cossms.2006.02.005 ↗
7. Piñero E, Molina JM, Narciso J, Garcia-Cordovilla C, Louis E (2008) J Compos Mater 42:279510.1177/0021998308096502 ↗
8. Molina JM, Saravanan RA, Arpón R, García-Cordovilla C, Louis E, Narciso J (2002) Acta Mater 50:24710.1016/S1359-6454(01)00348-2 ↗
9. Alonso A, Pamies A, Narciso J, Garcia-Cordovilla C, Louis E (1993) Metall Trans A 24:142310.1007/BF02668210 ↗
10. Spaepen F (1975) Acta Metall 23:72910.1016/0001-6160(75)90056-5 ↗
11. Molina JM, Arpón R, Saravanan RA, García-Cordovilla C, Louis E, Narciso J (2004) Scripta Mater 51:62310.1016/j.scriptamat.2004.05.009 ↗
12. Goicoechea J, García-Cordovilla C, Louis E, Pamies A (1992) J Mater Sci 27:5247. doi: 10.1007/BF0240382410.1007/BF02403824 ↗
13. Molina JM, Rodríguez-Guerrero A, Bahraini M, Weber L, Narciso J, Rodríguez–Reinoso F, Louis E, Mortensen A (2007) Scripta Mater 56:99110.1016/j.scriptamat.2007.01.042 ↗
14. Molina JM, Tian J, Garcia-Cordovilla C, Louis E, Narciso J (2007) J Mater Res 22:227310.1557/jmr.2007.0282 ↗
15. Mortensen A, Wong T (1990) Metall Trans A 21:225710.1007/BF02647888 ↗
16. Eustathopoulos N, Nicholas MG, Drevet B (1999) Wettability at high temperatures. Pergamon Press, Oxford
17. Passerone A, Muolo ML, Passerone D (2006) J Mater Sci 41:5088. doi: 10.1007/s10853-006-0442-810.1007/s10853-006-0442-8 ↗
18. Weirauch DA, Krafick WJ, Ackart G, Ownby PD (2005) J Mater Sci 40:2301. doi: 10.1007/s10853-005-1949-010.1007/s10853-005-1949-0 ↗
19. Gale WF, Totemeier TC (eds) (2004) Smithells metals reference book, 8th edn. Elsevier-ASM International, Oxford
20. Gupper A, Fernández A, Fernadez-Ramos C, Hofer F, Mitterer, Warbichler P (2002) Monatshefe für Chemie 133:83710.1007/s007060200056 ↗
21. Ong CW, Huang H, Zheng B, Kwok RWM, Hui YY, Lau WM (2004) J Appl Phys 95:352710.1063/1.1651321 ↗
22. Chu K, Lu YH, Shen YG (2008) Thin Solid Films 516:531310.1016/j.tsf.2007.07.042 ↗
23. Zhang F, Wolf GK, Wang X, Liu X (2001) Surf Coat Technol 148:6510.1016/S0257-8972(01)01305-6 ↗