journal article·2003-06

Mechanical and thermal properties of poly(butylene terephthalate)/poly(ethylene naphthalate), and Nylon66/poly(ethylene naphthalate) blends

Dylan Dae Bong Jung, D. Bhattacharyya, A. J. Easteal

Journal of Materials Science· Volume 38· Issue 12
Publisher page

Abstract

The tensile modulus, tensile strength and impact strength of melt blends of (a) poly(ethylene naphthalate) (PEN) and poly(butylene terephalate) (PBT) with 30, 40, 50, 60 and 70 wt% PEN, (b) Nylon66 and PEN with 30, 50 and 70 wt% Nylon66 were measured, and thermal/thermomechanical properties were analysed by differential scanning calorimetry and dynamic mechanical thermal analysis. Scanning electron microscopy was used for examination of the fracture surfaces of the blends. All PBT/PEN blends show two glass transitions corresponding to the presence of two phases: the glass transition temperature, T g, of the phase with the lower T g increases with increasing PEN content, and T g for the phase with higher T g decreases with increasing PBT content. The implication is that the two polymers are partially miscible, and scanning electron microscopy of fracture surfaces reveals a very small (sub-micron) domain size. Nylon66/PEN blends also show two phases, but the domain size is of the order of μm and there is no evidence of partial miscibility. Up to 50 weight proportions PBT does not lower the tensile strength of PBT/PEN blends, and the tensile strength lies between values predicted by the rule of mixtures and a modified rule of mixtures. Incorporation of at least 40% PEN in PBT increases impact strength, but blending with smaller proportions of PEN decreases impact strength. By contrast, blending of Ny66 and PEN results in reduction of tensile strength for all blend compositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Microplastics and Plastic Pollution

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. E. D. C. D. Nunes, J. A. M. Agnelli and R. A. Rossi, Polimeros: Ciencia e Tecnologia 8 (1998) 55.10.1590/S0104-14281998000200009 ↗
2. M. Guo and H. G. Zachmann, Macromol. 30 (1997) 2746.10.1021/ma9613695 ↗
3. M. Frank, Mod. Plas. Mid Nov. (1995) B51.
4. G. S. Bradily, H. R. Clauser and J. A. Vaccari, “Materials Handbook” (New York, McGraw-Hill, 1997) p. 691.
5. L. A. Utracki, “Commercial Polymer Blends” (Chapman & Hall, London, 1998) p. 42.10.1007/978-1-4615-5789-0 ↗
6. M. Ishiharada, S. Hayashi and S. Saito, Polym. 27 (1986) 349.10.1016/0032-3861(86)90148-5 ↗
7. S. Hayashi, M. Ishiharada and S. Saito, Polym. J. (Tokyo) 17 (1985) 953.10.1295/polymj.17.953 ↗
8. M. Cakmak, Y. D. Wang and M. Simhambhatla, Polym. En. Sci. 30 (1990) 721.10.1002/pen.760301205 ↗
9. D. R. Rueda, A. Varkalis, A. Viksne, F. J. Balta Calleja and H. G. Zachmann, J. Polym. Sci., Part B: Polym. Phys. 33 (1995) 1653.10.1002/polb.1995.090331111 ↗
10. D. R. Rueda and A. Varkalis, ibid. 33 (1995) 2263.10.1002/polb.1995.090331611 ↗
11. M. Guo and H. G. Zachmann, Macromol. Chem. Physi. 199 (1998) 1185.
12. H. Zhang and I. M. Ward, Macroml. 28 (1995) 7622.10.1021/ma00127a006 ↗
13. G. S. Bradily, H. R. Clauser and J. A. Vaccari, “Materials Handbook” (New York, McGraw-Hill, 1997) p. 690.
14. L. A. Utracki, “Commercial Polymer Blends” (Chapman & Hall, London, 1998) p. 337.10.1007/978-1-4615-5789-0_17 ↗
15. H. F. Brinson, T. J. Reinhart and S. J. Schneider, “Engineered Materials Handbook” 1 (ASM International, Metals Park, Ohio, 1987) p. 226.
16. D. D. Jung, D. Bhattacharyya and A. J. Easteal, J. Appl. Polym. Sci. 82 (2001) 1504.10.1002/app.1989 ↗
17. Idem., presented at POLYCHAR-10, 2002 and to be published in Mat. Res. Innov (scheduled for May 2003).
18. M. Guo, Book of Abstracts, 211th ACS National Meeting (1996) Poly230.
19. M. Guo and H. G. Zachmann, Book of Abstracts, 211th ACS National Meeting (1996) Poly317.
20. Idem., “Polym. Prep” (American Chemical Society, Division of Polym. Chem., 1996) Vol. 37, p. 829.
21. K. H. Yoon, S. C. Lee and O. O. Park, Polym. (Korea) 2 (1994) 75.
22. M. L. Cerrada and G. B. McKenna, Macromol. 33 (2000) 3065.10.1021/ma990400a ↗
23. J. R. Gillmor and J. Greener, J. Proc. ANTEC'96 (1996) p. 1734.
24. J. R. Gillmor and J. Greener, J. Proc. ANTEC'97 (1997) p. 1582.
25. P. K. Mallick, “Fiber-Reinforced Composites: Materials, Manufacturing, and Design” (M. Dekker, New York, 1993) p. 94.
26. R. M. Caddell, “Deformation and Fracture of Solids” (Prentice-Hall, New Jersey, 1980) p. 257.
27. M. Guo and W. J. Brittain, Book of Abstracts, 215th ACS National Meeting (1998) Poly107.