journal article·2009-07

Microstructural evolution during batch annealing of boron containing aluminum-killed steel

Anjana Deva, B. K. Jha, N. S. Mishra

Journal of Materials Science· Volume 44· Issue 14
Publisher page

Abstract

Role of boron in low carbon aluminum-killed cold rolled batch annealed steels has been critically examined. It was found that it is not the absolute boron but B/N ratio that controls the forming properties. Pancake shaped grains (high grain shape anisotropy) are highly desirable for improving the desirable {111} texture, normal anisotropy, and draw ability of the steel sheets. Microstructural analysis showed that the extent of pancaking decreases with increase in B/N atomic ratio and reaches ultimately to formation of equiaxed grains. Low B/N ratio (upto 0.3) resulted in improved mean plastic anisotropy ratio (rm) value and high grain shape anisotropy, which has been characterized through grain aspect ratio. The desirable orientation in steel with low B/N ratio is attributed to sufficient availability of Al and N to precipitate during batch annealing. Optimum amount of boron, aluminum, and nitrogen in steel has resulted in coarse pancake structure, which is ideally suited for improved formability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Sudo M, Tsukatani I (1984) In: Proceeding of conference on technology of continuous annealed cold rolled sheet steel, TMS-AIME, Warrendale, PA, p 203
2. Takahashi N, Shibata M, Furuno Y, Hayakawa H, Kakuta K, Yamamoto K (1982) In: Bramfitt BL, Mangonon PL (eds) Metallurgy of continuous annealed sheet steel, TMS-AIME, Warrendale, PA, p 133
3. Funukawa Y, Inazumi T, Hosoya Y (2001) ISIJ Int 41(8):90010.2355/isijinternational.41.900 ↗
4. Quinto DT, Hughes IF (1976) Metall Trans A 7(2):16510.1007/BF02644453 ↗
5. Lyudkovsky G, Rastogi P (1985) Magnetics 21:191210.1109/TMAG.1985.1064036 ↗
6. Deva A, De Saikat K, Jha BK (2008) Mater Sci Technol 1:12410.1179/174367507X247520 ↗
7. Hutchinson WB (1984) Int Met Rev 29(1):2510.1179/imtr.1984.29.1.25 ↗
8. Gawne DT, Higgins GT (1969) Textures in research and practice. Springer-Verlag, Berlin, p 319
9. Abe H, Takagi K (1969) Testu-to-Hagane 55:121910.2355/tetsutohagane1955.55.13_1219 ↗
10. Sahay SS, Harish Kumar BV, Krishnan SJ (2003) J Mater Eng Perform 12:70110.1361/105994903322692510 ↗
11. Meyzaud Y, Paniere P (1974) Mem Sci Rev Met 71:423
12. Guillet A, Es Sadiqi E, Lesperance G, Hamel FG (1996) ISIJ Int 36:119010.2355/isijinternational.36.1190 ↗
13. Fountain RW, Chipman J (1962) Trans AIME 224:165
14. Leslie WC, Rickett RL, Dotson CL, Walton CS (1954) Trans ASM 46:1470
15. Ono S, Nishimoto A (1986) Trans Iron Steel Inst Jpn 26:B3310.2355/isijinternational1966.26.33 ↗