journal article·2014-08

Effect of mechanical and electrical activation on the combustion synthesis of Al3Ti

K. Morsi, Pratik Mehra

Journal of Materials Science· Volume 49· Issue 15
Publisher page

Abstract

Titanium aluminides have attracted immense interest as lightweight intermetallic compounds that pos- sess good high-temperature mechanical and corrosion properties. In the present work, titanium aluminides (Al3Ti) have been reactively processed from elemental powder using a combined mechanical and electrical activation approach. The effect of mechanical activation and electric current intensity on the ignition and phase development is discussed. Ignition was not possible when powders were milled for a short time, while prolonged milling resulted in mechanical activation that promoted a self-propagating- type reaction. The time to engulfment of the compact with the reaction wave was found to decrease with an increase in current intensity. A secondary reaction occurred at the higher current intensity, which in turn increased the prod- uct homogeneity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Morsi K (2012) The diversity of combustion synthesis processing: a review. J Mater Sci 47(1):68–92. doi: 10.1007/s13632-013-0071-y10.1007/s10853-011-5926-5 ↗
2. Cao J, Wang HQ, Qi JL, Lin XC, Feng JC (2011) Combustion synthesis of TiAl intermetallics and their simultaneous joining to carbon/carbon composites. Scripta Mater 65(3):261–26410.1016/j.scriptamat.2011.04.021 ↗
3. Lagos MA, Agote I, Gutiérrez M, Sargsyan A, Pambaguian L (2010) Synthesis of γ-TiAl by thermal explosion + compaction route: effect of process parameters and post combustion treatment on product microstructure. Int J Self-Prop High-Temp Synth 19(1):23–2710.3103/S1061386210010048 ↗
4. Orru R, Cao G, Munir ZA (1999) Mechanistic investigation in the field-activated combustion synthesis (FACS) of titanium aluminides. Chem Eng Sci 54:3349–335510.1016/S0009-2509(98)00459-X ↗
5. Locci AM, Licheri R, Orru R (2007) Mechanical and electric current activation of solid–solid reactions for the synthesis of fully dense advanced materials. Chem Eng Sci 62:4885–489010.1016/j.ces.2007.01.009 ↗
6. Orru R et al (2001) Synthesis of dense nanometric MoSi2 through mechanical and field activation field activation. J Mater Res 16(5):1439–144810.1557/JMR.2001.0201 ↗
7. Kim JS et al (2010) Properties of Cu-based nanocomposites produced by mechanically-activated self-propagating high-temperature synthesis and spark-plasma sintering. J Nanosci Nanotechnol 10:252–25710.1166/jnn.2010.1523 ↗
8. Bernard F, Le Gallet S, Spinassou N (2004) Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures. Sci Sinter 36:155–16410.2298/SOS0403155B ↗
9. Nikzad L, Licheri R, Ebadzadeh T (2012) Effect of ball milling on reactive spark plasma sintering of B4C–TiB2 composites. Ceram Inter 38:6469–648010.1016/j.ceramint.2012.05.024 ↗
10. Tsuchida T, Kakuta T (2006) Fabrication of SPS compacts from NbC–NbB2 powder mixtures synthesized by the MA-SHS in air process. J Alloys Compd 415:156–16110.1016/j.jallcom.2005.08.012 ↗
11. Nikzad L, Orru R, Licheri R (2012) Fabrication and formation mechanism of B4C–TiB2 composite by reactive spark plasma sintering using un-milled and mechanically activated reactants. J Am Ceram Soc 95:3463–347110.1111/j.1551-2916.2012.05416.x ↗
12. Tsuchida T, Yamamoto S (2004) MA-SHS and SPS of ZrB2–ZrC composites. Solid State Ionics 172:215–21610.1016/j.ssi.2004.05.020 ↗
13. Heian EM, Khalsa SK, Lee JW (2004) Synthesis of dense, high-defect-concentration B4C through mechanical activation and field-assisted combustion. J Am Ceram Soc 87:779–78310.1111/j.1551-2916.2004.00779.x ↗
14. Yi HC, Petric A, Moore JJ (1992) Effect of Heating Rate on the Combustion Synthesis of Ti-Al Intermetallic Compounds J Mater Sci. 37:6797–6806
15. Suryanarayana C (2004) Mechanical alloying and milling. Marcel Dekker, New York, pp 111–11310.1201/9780203020647 ↗
16. Zhu P, Li JCM, Liu CT (2002) Reaction mechanism of combustion synthesis of NiAl. Mater Sci Eng A329–331:57–6810.1016/S0921-5093(01)01549-0 ↗
17. Bertolino N, Monagheddu M, Tacca A, Giiuliani P, Zanotti C, Anselmi-Tamburini U (2003) Ignition mechanism in combustion synthesis of Ti–Al and Ti–Ni systems. Intermetallics 11:41–4910.1016/S0966-9795(02)00128-0 ↗
18. Shirai Y, Masaki K, Inoue T, Nishitani SR, Yamaguchi M (1995) Electrical resistivity of L12 trialuminides containing 3d transition element. Intermetallics 3:381–38910.1016/0966-9795(95)94256-E ↗
19. Desai PD, James HM, Ho CY (1984) Electrical resistivity of aluminum and manganese. J Phys Chem Ref Data 13(4):1131–117210.1063/1.555725 ↗
20. Bel’skaya EA, Kulyamina EY (2007) Electrical resistivity of titanium in the temperature range from 290 to 1800 K. High Temp 45(6):785–79710.1134/S0018151X07060090 ↗
21. Frei JM, Anselmi-Tamburini U, Munir ZA (2007) Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method. J Appl Phys 101(114914):1–8
22. Liang SW, Chang YW, Shao TL, Chen C (2006) Effect of three-dimensional current and temperature distributions on void formation and propagation in flip chip solder joints during electromigration. Appl Phys Lett 89:02211710.1063/1.2220550 ↗