Estimation of dynamic fatigue strengths in brittle materials under a wide range of stress rates
Source abstract
Abstract
This paper aims to statistically estimate the dynamic fatigue strength in brittle materials under a wide range of stress rates. First, two probabilistic models were derived on the basis of the slow crack growth (SCG) concept in conjunction with two-parameter Weibull distribution. The first model, Model I, is a conventional probabilistic delayed-fracture model based on a concept wherein the length of the critical crack growth due to SCG is enough larger than the initial crack length. For the second model, Model II, a new probabilistic model is derived on the basis of a concept wherein the critical cracks have widely ranging lengths. Next, a four-point bending test using a wide range of stress rates was performed for soda glass and alumina ceramics. We constructed fracture probability–strength–time diagrams (F–S–T diagrams) with the experimental results of both materials using both models. The F–S–T diagrams described using Model II were in good agreement with plots of the fracture strength and the fracture time of both materials more so than Model I.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · High-Velocity Impact and Material Behavior · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Evans AG (1974) Int J Fract 10(2):25110.1007/BF00113930 ↗
2. Evans AG, Johnson H (1975) J Mater Sci 10:214. doi:https://doi.org/10.1007/BF0054034510.1007/BF00540345 ↗
3. Futakawa M, Kikuchi K, Tanabe Y, Muto Y (1997) J Eur Ceram Soc 17:157310.1016/S0955-2219(97)00028-9 ↗
4. Barinov SM, Ivanov NV, Orlov SV, Shevchenko V (1998) Ceram Int 24:42110.1016/S0272-8842(97)00030-8 ↗
5. Pan LS, Matsuzawa M, Horibe S (1998) Mater Sci Eng A 244:19910.1016/S0921-5093(97)00546-7 ↗
6. Evans AG (1980) Int J Fract 16(6):48510.1007/BF02265214 ↗
7. Seshadri SG, Srinivasan M, Weber GE (1982) J Mater Sci 17:1297. doi:https://doi.org/10.1007/BF0075223810.1007/BF00752238 ↗
8. Guiu F, Reece MJ, Vaughan DAJ (1991) J Mater Sci 26:3275. doi:https://doi.org/10.1007/BF0112467410.1007/BF01124674 ↗
9. Tanaka T, Nakayama H, Okabe N, Imamichi T (1995) Strength and crack growth behavior of sintered silicon nitride in cyclic fatigue. Cyclic fatigue in ceramics. Elsevier Science, Japan, p II345
10. Ping Z, Zhongqin L, Guanlong C, Ikeda K (2004) Int J Fatigue 26:110910.1016/j.ijfatigue.2004.03.008 ↗
11. Davidge RW, Mclaren JR, Tappin G (1973) J Mater Sci 8:1699. doi:https://doi.org/10.1007/BF0055217910.1007/BF02403519 ↗
12. Aoki S, Ohata I, Ohnabe H, Sakata M (1983) Int J Fract 21:28510.1007/BF00942347 ↗
13. Kokubo T, Ito S, Shigematsu M, Sakka S (1987) J Mater Sci 22:4067. doi:https://doi.org/10.1007/BF0113335910.1007/BF01133359 ↗
14. Okabe N, Ikeda T (1991) Mater Sci Eng A 143:1110.1016/0921-5093(91)90721-X ↗
15. Okabe N, Hirata H (1995) High temperature fatigue properties for some types of SiC and Si3N4. Cyclic fatigue in ceramics. Elsevier Science, Japan, p 245
16. Pfingsten T, Glien K (2006) J Eur Ceram Soc 26:306110.1016/j.jeurceramsoc.2005.08.004 ↗
17. Evans AG, Fuller ER (1974) Metall Trans 5:2710.1007/BF02642921 ↗
18. Tokunaga H, Deng G, Ikeda K, Kaizu K (2005) Japan Soc Mech Eng A 71(712):170810.1299/kikaia.71.1708 ↗