journal article·2010-03

Effect of compact density and preheating temperature of the Al–Ti–C preform on the fabrication of in situ Mg–TiC composites

A. K. Chaubey, B. K. Mishra, N. K. Mukhopadhyay, P. S. Mukherjee

Journal of Materials Science· Volume 45· Issue 6
Publisher page

Abstract

Magnesium reinforced in situ TiC particulates was successfully synthesized by utilizing the self-propagating high temperature synthesis (SHS) process. The result showed that preform temperature and compact density have effects on the SHS reaction. It is observed that when the compact density was below 68% of the theoretical density, no SHS reaction occurred. However, with an increase in density from 68 to 72%, the successful thermal explosion reaction was observed in the Mg melt. Besides this, the effect of preheat temperature on the fabrication of Mg/TiC composite was extensively studied and found that the preheat temperature below 300 °C failed to give rise to SHS reaction. However, the preheat temperature of 450, 500, and 550 °C favors the reaction inside the liquid melt, but the temperature of 600 °C leads to the ignition reaction in the preheating furnace itself. SEM and EDX study confirms fine distribution of TiC in the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Wang HY, Jiang QC, Li XL, Wang JG, Guan QF, Liang HQ (2003) Mater Res Bull 38:138710.1016/S0025-5408(03)00153-3 ↗
2. Guan FQ, Wang HY, Li XL, Jiang QC (2004) J Mater Sci 39:5569. doi: 10.1023/B:JMSC.0000039290.12473.7510.1023/B:JMSC.0000039290.12473.75 ↗
3. Wang HY, Jiang QC, LI XL, Zhao F (2004) J Alloys Compd 366:L910.1016/S0925-8388(03)00737-0 ↗
4. Kramer JW, Isaacs SA, Manivannan V (2009) J Mater Sci 44:3387. doi: 10.1007/s10853-009-3448-110.1007/s10853-009-3448-1 ↗
5. Li Y, Jin S, Liu G, Zhang W, Ao J, Li Z (2009) J Mater Sci 44:4155. doi: 10.1007/s10853-009-3616-310.1007/s10853-009-3616-3 ↗
6. Tun KS, Gupta M (2008) J Mater Sci 43:4503. doi: 10.1007/s10853-008-2649-310.1007/s10853-008-2649-3 ↗
7. Cao G, Choi H, Konishi H, Kou S, Lakes R, Li X (2008) J Mater Sci 43:5521. doi: 10.1007/s10853-008-2785-910.1007/s10853-008-2785-9 ↗
8. Jiang QC, Wang HY, Guan QF, XU CL (2003) Mater Lett 57:258010.1016/S0167-577X(02)01314-9 ↗
9. Wang HY, Jiang QC, Li XL, Wang JG (2003) Scripta Mater 481:349
10. Contreras A, Lopez V, Bedolla HE (2004) Scripta Mater 51:24910.1016/j.scriptamat.2004.04.007 ↗
11. Dong Q, Chen L, Zhao M, Bi J (2004) J Mater Sci Technol 20:3
12. Zang E, Zeng S, Yang B, Li Q, Ma M (1999) Metall Mater Trans A 30A:114710.1007/s11661-999-0166-x ↗
13. Lee W-C, Chung S-L (1997) J Am Ceram Soc 80(1):5310.1111/j.1151-2916.1997.tb02790.x ↗
14. Yang B, Chen G, Zhang J (2001) Mater Des 22:64510.1016/S0261-3069(01)00029-2 ↗
15. Shin J, Ahn D-H, Shin M-S, Kim Y-S (2000) J Am Ceram Soc 83(5):102110.1111/j.1151-2916.2000.tb01324.x ↗
16. Kennedy AR, Weston DP, Jones MI, Enel C (2000) Scripta Mater 42:118710.1016/S1359-6462(00)00356-0 ↗
17. Tong XC (1998) J Mater Sci 33:5365. doi: 10.1023/A:100449411611910.1023/A:1004494116119 ↗
18. John J, Moore H, Feng J (1995) Prog Mater Sci 39:24310.1016/0079-6425(94)00011-5 ↗