journal article·2007-04

Effects of hydrogen on the mechanical properties of a 2 1/4Cr–1Mo steel

Paula Cristina Siquara, Carlos Bruno Eckstein, Luiz Henrique de Almeida, Dilson Silva dos Santos

Journal of Materials Science· Volume 42· Issue 7
Publisher page

Abstract

This paper explores the effects of hydrogen on the mechanical properties of a 2 1/4Cr–1Mo steel. The results for both microstructural conditions, as received and aged, indicated a loss of ductility after hydrogen charging treatment, but the yield strength and ultimate tensile strength remained unaltered. The fractograph analysis revealed that the fracture mode was modified by the hydrogen. The steel in the as-received condition showed craters and fisheyes on the fracture surface. The aged steel showed a brittle appearance associated with cleavage facets and small portion of areas with dimples. The hydrogen diffusivity and solubility were investigated using electrochemical permeation technique. It was observed that the hydrogen diffusivity decreased from 2.3 ± 0.4 × 10−10 m2 s−1 in the as-received condition to 5.7 ± 0.1 × 10−11 m2 s−1 in the aged condition. The hydrogen solubility showed an increase for the aged condition in comparison to the as received sample. Both phenomena can be attributed to carbide evolution during aging, resulting in an increase of the carbide/matrix interfacial area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. ASM (1990) Metals handbook, vol 1. Metals Park, Ohio
2. American Petroleum Institute (1998) Publication 941, Steels for hydrogen service at elevated temperatures and pressures in petroleum refineries and petrochemical plants, Supplement 1. Washington
3. Tan J, Chao YJ (2005) Mater Sci Eng A405:21410.1016/j.msea.2005.05.034 ↗
4. Antalffy LP, Chaku PN, Canonico DA, Pfeifer JA, Alcorn DG (2002) Int J Pressure Vessels Piping 79:56110.1016/S0308-0161(02)00090-X ↗
5. ASTM A387/A 387M (1999) Standard specification for pressure vessels plates. Alloy Steel, Chromium-Molybdenum
6. Boes N, Zuchner H (1976) J Less-Common Met 49:22310.1016/0022-5088(76)90037-0 ↗
7. Parvathavarthini N, Saroja S, Dayal RK, Khatak HS (2001) J Nuclear Mater 288:18710.1016/S0022-3115(00)00706-6 ↗
8. Tsai MC, Yang JR (2003) Mater Sci Eng A340:1510.1016/S0921-5093(02)00081-3 ↗
9. Timmins PF (1997) ASM international. Materials Park, Ohio
10. George ED (1961) Mechanical metallurgy. McGraw-Hill
11. Strnadel B (1998). Eng Fract Mech 61:29910.1016/S0013-7944(98)00073-3 ↗
12. Dayal RK, Parvathavarthini N (2003) Sadhana 28:43110.1007/BF02706442 ↗
13. Hang GW, Song YJ (1995) Scripta Metall Mater 32:110710.1016/0956-716X(95)00078-A ↗
14. Garet M, Brass AM, Haut C, Guttierez-Solana F (1998) Corros Sci 40:107310.1016/S0010-938X(98)00008-0 ↗