journal article·2007-09-21

Material characterization of blended epoxy resins related to fracture toughness

Andi Haris, Tadaharu Adachi, Yu Hayashi, Wakako Araki

Journal of Materials Science· Volume 42· Issue 23
Publisher page

Abstract

The present study describes the effect of the macromolecular modifications on the fracture toughness of an epoxy system. We synthesized epoxy networks by the reaction of diglycidyl ether of bisphenol A (DGEBA) with methyl-tetrahydro-phthalic anhydride (MTHPA), initiated by a tertiary amine. Several materials were obtained by adding a high molecular weight monomer to one with low molecular weight (both based on DGEBA) at different concentrations. In every case, a stoichiometric amount of MTHPA was employed. The glass transition temperature and the Angell’s fragility index, derived from thermo-viscoelastic properties, were used to characterize the materials. Relationship between these two parameters and the fracture properties, including the fracture toughness and the microscopic roughness of the fracture surfaces observed by atomic force microscope (AFM), was then investigated. We found that there were direct correlations among the glass transition temperature, the fragility, the fracture toughness, and the roughness. This study revealed that both the glass transition temperature and the fragility are effective for characterizing material in relation to the fracture toughness of the blended epoxy resins.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Roland CM, McGrath KJ, Casalini R (2006) Macromolecules 39:358110.1021/ma060315k ↗
2. Adachi T, Araki W, Nakahara T, Yamaji A, Gamao M (2002) J Appl Polym Sci 86:226110.1002/app.11206 ↗
3. Araki W, Adachi T, Yamaji A, Gamao M (2002) J Appl Polym Sci 86:226610.1002/app.11208 ↗
4. Araki W, Adachi T, Yamaji A (2003) JSME Int J Series A 46:16310.1299/jsmea.46.163 ↗
5. Araki W, Adachi T, Yamaji A (2006) Rec Res Dev Appl Polym Sci 3:205
6. Kwon SC, Adachi T (2006) J Mater Sci (in press) doi: 10.1007/s10853-006-1025-410.1007/s10853-006-1025-4 ↗
7. Luñak S, Vladyka J, Dušek K (1978) Polymer 19:93110.1016/0032-3861(78)90200-8 ↗
8. Pascault JP, Williams RJJ (1990) J Polym Sci B 28:8510.1002/polb.1990.090280107 ↗
9. Angell CA (1988) J Phys Chem Solid 49:86310.1016/0022-3697(88)90002-9 ↗
10. Ito K, Moynihan CT, Angell CA (1999) Nature (London) 398:49210.1038/19042 ↗
11. Martinez LM, Angell CA (2001) Nature (London) 410:66310.1038/35070517 ↗
12. Scopigno T, Rocco G, Sette F, Monaco G (2003) Science 302:84910.1126/science.1089446 ↗
13. Novikov VN, Sokolov AV (2004) Nature (London) 431:96110.1038/nature02947 ↗
14. Novikov VN, Sokolov AV, Dyre JC (2004) Nat Mater 3:74910.1038/nmat1247 ↗
15. Cangialosi D, Alegría A, Colmenero J (2006) J Chem Phys 124:2490610.1063/1.2149853 ↗
16. Kanaya T, Tsukushi I, Kaji K (1997) Prog Theor Phys Suppl 126:13710.1143/PTPS.126.133 ↗
17. Kanaya T, Tsukushi I, Kaji K, Gabrys B, Bennington SM (1998) J Non-Cryst Solids 235–237:21210.1016/S0022-3093(98)00644-9 ↗
18. Adam G, Gibbs JH (1965) J Chem Phys. 43:13910.1063/1.1696442 ↗
19. McCrum NG, Read BE, Williams G (1967) Anelastic and dielectric effects in polymeric solids. Wiley, London
20. Böhmer R, Ngai KL, Angell CA, Plazek DJ (1993) J Chem Phys 99:420110.1063/1.466117 ↗
21. Plazek DJ, Choy IC (1989) J Polym Sci B 27:30710.1002/polb.1989.090270207 ↗
22. Plazek DJ, Choy IC, Kelley FN, Meerwall E, Suş LJ (1982) Rubber Chem Technol 56:86610.5254/1.3538161 ↗
23. Schwarzl F, Staverman AJ (1952) J Appl Phys 23:83810.1063/1.1702316 ↗
24. Benthem JP, Koiter WT (1975) In: Sih GC (ed) Mechanical fracture, vol 1. Methods of analysis and solutions of crack problems. Noordhoff International Publishing, Leyden, p 155
25. Leaderman H (1943) Elastic and creep properties of filamentous materials and other high polymers. The Textile Foundation, Washington D.C., p 175
26. Brown EN, White SR, Sottos NR (2004) J Mater Sci 39:170310.1023/B:JMSC.0000016173.73733.dc ↗
27. Brüning R, Sutton M (1996) J Non-Cryst Solids 205–207:48010.1016/S0022-3093(96)00264-5 ↗
28. Pearson RA, Yee AF (1989) J Mater Sci. 24:257110.1007/BF01174528 ↗
29. Levita G, De Petris S, Marchetti A, Lazzeri A (1991) J Mater Sci 26:234810.1007/BF01130180 ↗