Simulation of aluminum foam formation and distribution uniformity
Source abstract
Abstract
Effects of bubble size formed on orifice inside an aluminum melt and bubble distribution on a foaming chamber surface were studied by experimental simulation. The bubble size formed on the liquid surface is increased with the increase in air flow rate and pressure, orifice size, and immersion depth. The orifice with 45° taper head produces smaller bubbles than that with 60° taper and flat ones. A calculation formula is established to predict bubble size formed on the orifice inside a quiescent liquid at a given surface bubble size, and the calculation agrees well with the measurement data. Orifice reciprocal agitation improves cell size uniformity of the closed-cell aluminum foam, compared with orifice rotating. Although orifice rotating is effective in producing smaller bubbles, the agitation of orifice reciprocating produces more uniform bubble distribution on the liquid surface. The bubble distribution is further improved when evenly spaced orifices are replaced by nonequidistant orifices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pickering emulsions and particle stabilization · Cellular and Composite Structures · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Deqing W, Ziyuan S (2003) Mater Sci Eng A 361:4510.1016/S0921-5093(03)00557-4 ↗
2. Deqing W, Weiwei X, Xiangjun M, Ziyuan S (2005) J Mater Sci 40:347510.1007/s10853-005-2852-4 ↗
3. Weigang C, Tomasz W (2001) Thin-Walled Struct 39:28710.1016/S0263-8231(01)00006-4 ↗
4. Firstov SA, Podrezov YN, Lugovoi NI, Slyunyaev VN, Verbilo DG (2001) Powder Metall Met Ceram 39:40710.1023/A:1026673825295 ↗
5. Nahra HK, Kamotani Y (2003) Chem Eng Sci 58:5510.1016/S0009-2509(02)00516-X ↗
6. Tan RBH, Chen WB, Tan KH (2000) Chem Eng Sci 55:625910.1016/S0009-2509(00)00211-6 ↗
7. Huttenhuis PJG, Kuipers JAM, van Swaaij WPM (1996) Chem Eng Sci 51:527310.1016/S0009-2509(96)00374-0 ↗
8. Maozhao X, Huiling S, Hong L, Deqing W (2007) J Thermal Sci Tech 6:146
9. Deqing W, Weiwei X, Ziyuan S (2006) Mater Sci Eng A 431:29810.1016/j.msea.2006.06.016 ↗
10. Hong L, Maozhao X, Deqing W (2007) Chin J Process Eng 7:34
11. Hong L, Maozhao X, Jingdong H, Deqing W (2005) J Thermal Sci Tech 4:262
12. Yanpeng L, Bofeng B (2006) J Hydrodynamics 21:660
13. Boqin G (2000) J Nanjing Univ Chem Technol 22:1
14. Xianglin F (1989) Higher hydromechanics, 1st edn. Xian Jiaotong University Press, Xian, China, p 53 [in Chinese]
15. Changfa W, Linghua C, Kai W, Yunming L (1990) Macromol Lett 4:193
16. Hur B-Y, Park S-H, Hiroshi A (2003) Mater Sci Forum 439:51–5610.4028/www.scientific.net/MSF.439.51 ↗
17. Songlin Wang, Yi Feng, Qian Xu, Xuebin Zhang (2005) Metallic Function Mater 12:22
18. Tan RBH, Chen WB, Tan KH (2000) Chemical Eng Sci 55:625910.1016/S0009-2509(00)00211-6 ↗
19. Zhenwei Y, Fulei C, Sanbao W (2006) Eng Mech 27:49