Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves
Source abstract
Abstract
The wetting of angular alumina particle preforms by Cu–Sn alloys is investigated by means of pressure infiltration experiments conducted at 1150 °C, using a system enabling dynamic and precise measurements of the metal volume injected into the preform. Wetting is quantified in terms of drainage curves, which plot the volume fraction of molten metal in the packed powder preform (also called saturation) versus the applied pressure. The shape of the curves confirms earlier findings, namely (i) the initial stage of infiltration is dominated by percolation and obeys a universal scaling relation while the metal shape is fractal; and (ii) at higher saturation, incremental pore-filling is dictated by local pore geometrical characteristics, saturation curves obeying then the Brooks–Corey correlation. According to sessile drop data in the literature, the Cu–Sn system is characterized by relatively small changes in the contact angle with alloy composition (128°–122°), while the metal surface tension changes by more than a factor two over the whole composition range. One would, therefore, expect that the drainage curves be indifferently proportional to the molten metal surface tension or the work of immersion: the present data show that this is indeed verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Pickering emulsions and particle stabilization · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Adamson AW (1982) Physical chemistry of surfaces, 4th edn. Wiley, New York
2. Eustathopoulos N, Nicholas MG, Drevet B (1999) Wettability at high temperature. Pergamon-Elsevier Science, Amsterdam
3. deGennes PG, Brochard-Wyart F, Quéré D (2004) Capillarity and wetting penomena: drops, bubbles, pearls, waves, Springer, New York (trans: Reisinger A)10.1007/978-0-387-21656-0 ↗
4. Eustathopoulos N, Mortensen A (1993) In: Suresh S, Mortensen A, Needleman A (eds) Fundamentals of metal matrix composites. Butterworth-Heinemann, Stoneham, pp 42–5810.1016/B978-0-08-052371-2.50007-9 ↗
5. Mortensen A, Jin I (1992) Solidification processing of metal matrix composites. Int Mater Rev 37:101–12810.1179/imr.1992.37.1.101 ↗
6. Michaud VJ (1993) In: Suresh S, Mortensen A, Needleman A (eds) Fundamentals of metal matrix composites. Butterworth-Heinemann, Stoneham, pp 3–4110.1016/B978-0-08-052371-2.50005-5 ↗
7. Lloyd DJ, Morris AD, Jin I (1991) Melt process for the production of metal matrix composite materials with enhanced particle/matrix wetting. U.S 5,028,392
8. Mortensen A (2000) In: Clyne TW (ed) Comprehensive composite materials, vol 3. Pergamon, Oxford, pp 521–55410.1016/B0-08-042993-9/00019-X ↗
9. Asthana R (1998) Solidification processing of reinforced metals. Trans-Tech Publications, Uetikon-Zurich10.4028/b-Ae8iDN ↗
10. Evans A, SanMarchi C, Mortensen A (2003) Metal matrix composites in industry: an introduction and a survey. Kluwer Academic Publishers, Dordrecht10.1007/978-1-4615-0405-4 ↗
11. Michaud V, Mortensen A (2001) Infiltration processing of fibre reinforced composites: governing phenomena. Compos A 32:981–996. doi: 10.1016/S1359-835X(01)00015-X10.1016/S1359-835X(01)00015-X ↗
12. Gutowski TG (1997) Advanced Composite Manufacturing. Wiley, New York
13. Sastry AM (2000) In: Anthony K, Carl Z (eds) Comprehensive composite materials, vol 2. Pergamon, Oxford, pp 609–62210.1016/B0-08-042993-9/00176-5 ↗
14. Bourban PE (2000) In: Kelly A, Zweben C (eds) Comprehensive composite materials, vol 2. Pergamon, Oxford, pp 965–97710.1016/B0-08-042993-9/00184-4 ↗
15. Clyne TW (2000) Comprehensive composite materials, vol 3. Pergamon, Oxford, pp 1–84210.1016/B0-08-042993-9/00001-2 ↗
16. Bhatti AR, Farries PM (2000) In: Kelly A, Zweben C (eds) Comprehensive composite materials, vol 4. Pergamon, Oxford, pp 645–66710.1016/B0-08-042993-9/00107-8 ↗
17. Parnas R (2000) Liquid composite molding. Hanser Gardner Publications, Cincinnati10.3139/9783446443020 ↗
18. Garcia-Cordovilla C, Louis E, Narciso J (1999) Pressure infiltration of packed ceramic particulates by liquid metals. Acta Mater 47(18):4461–4479. doi: 10.1016/S1359-6454(99)00318-310.1016/S1359-6454(99)00318-3 ↗
19. Chawla N, Chawla KK (2006) Metal matrix composites. Springer, New York10.1002/9783527603978.mst0150 ↗
20. Taya M, Arsenault RJ (1989) Metal matrix composites: thermomechanical behavior. Pergamon Press, Oxford
21. Adam NK (1941) The physics and chemistry of surfaces, third edition. Republished in 1968 by Dover Publications, New York, USA
22. Morrow NR (1970) Physics and thermodynamics of capillary action in porous media. Ind Eng Chem 62:32–56. doi: 10.1021/ie50726a00610.1021/ie50726a006 ↗
23. Bear J (1972) Dynamics of fluids in porous media. American Elsevier, New York
24. Michaud VJ, Compton L, Mortensen A (1994) Capillarity in isothermal infiltration of alumina fiber preforms with aluminium. Metall Trans A 25:2145–2152. doi: 10.1007/BF0265231510.1007/BF02652315 ↗
25. Bahraini M, Weber L, Narciso J, Mortensen A (2005) Wetting in infiltration of alumina particle preforms with molten copper. J Mater Sci 40:2487–2491. doi: 10.1007/s10853-005-1980-110.1007/s10853-005-1980-1 ↗
26. Léger A, Calderon NR, Charvet R et al (2012) Capillarity in pressure infiltration: improvements in characterization of high-temperature systems. J Mater Sci 47:8419–8430. doi: 10.1007/s10853-012-6645-210.1007/s10853-012-6645-2 ↗
27. Dullien FAL (1979) Porous media, fluid transport and pore structure. Academic Press, New York
28. Hunt A, Ewing R (2009) Percolation theory for flow in porous media. Springer, Heidelberg
29. Sahimi M (2011) Flow and transport in porous media and fractured rock: from classical methods to modern approaches, 2nd edn. Wiley-VCH Verlag, Germany10.1002/9783527636693 ↗
30. Mortensen A (1991) Interfacial phenomena in the solidification processing of metal matrix composites. Mater Sci Eng A 135:1–11. doi: 10.1016/0921-5093(91)90527-T10.1016/0921-5093(91)90527-T ↗
31. Bahraini M (2007) Characterization of capillary forces during liquid metal infiltration, EPFL doctoral thesis 3787. Ecole Polytechnique Fédérale de Lausanne, Lausanne
32. Molina J, Bahraini M, Weber L, Mortensen A (2008) Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity. J Mater Sci 43:5061–5068. doi: 10.1007/s10853-008-2670-610.1007/s10853-008-2670-6 ↗
33. Léger A, Molina JM, Weber L, Mortensen A (2014) Percolation and universal scaling in composite infiltration processing, Mater Res Lett (in print)10.1080/21663831.2014.948692 ↗
34. Kaufmann H, Mortensen A (1992) Wetting of Saffil™ alumina fiber preforms by aluminum at 973 K. Metall Trans A 23:2071–2073. doi: 10.1007/BF0264755410.1007/BF02647554 ↗
35. Amore S, Ricci E, Lanata T, Novakovic R (2008) Surface tension and wetting behaviour of molten Cu–Sn alloys. J Alloy Compd 452:161–166. doi: 10.1016/j.jallcom.2007.01.17810.1016/j.jallcom.2007.01.178 ↗
36. Lee J, Shimoda W, Tanaka T (2004) Surface tension and its temperature coefficient of liquid Sn-X (X = Ag, Cu) alloys. Mater Trans 45:2864–2870. doi: 10.1088/0957-0233/16/2/01510.2320/matertrans.45.2864 ↗
37. Bahraini M, Molina JM, Kida M, Weber L, Narciso J, Mortensen A (2005) Measuring and tailoring capillary forces during liquid metal infiltration. Curr Opin Solid State Mater Sci 9:196–201. doi: 10.1016/j.cossms.2006.02.00710.1016/j.cossms.2006.02.007 ↗
38. Lenormand R (1989) Flow through porous media: limits of fractal patterns. Proc R Soc Lond A 423:159–16810.1098/rspa.1989.0048 ↗
39. Clément E, Baudet C, Hulin JP (1985) Multiple scale structure of non wetting fluid invasion fronts in 3D model porous media. J Phys Lett 46:1163–1171. doi: 10.1051/jphyslet:019850046024011630010.1051/jphyslet:0198500460240116300 ↗
40. Wilkinson D (1986) Percolation effects in immiscible displacement. Phys Rev A 34:1380–1391. doi: 10.1103/PhysRevA.34.138010.1103/PhysRevA.34.1380 ↗
41. Stauffer D, Aharony A (1994) Introduction to percolation theory—revised, 2nd edn. CRC Press, Boca Raton
42. Gouyet JF (1996) Physics and fractal structures. Masson, Paris and Springer, New York
43. Brooks RH, Corey AT (1964) Hydraulic properties of porous media, 3. Colorado State University Hydrology Papers
44. Dopler T, Modaressi A, Michaud VJ (2000) Simulation of metal composite isothermal infiltration processing. Metall Mater Trans B 31:225–233. doi: 10.1007/s11663-000-0041-z10.1007/s11663-000-0041-z ↗
45. Rodriguez A, Sanchez S, Narciso J, Louis E, Rodriguez-Reinoso F (2005) Pressure infiltration of Al–Si alloys into compacts made of carbon particles. J Mater Sci 40:2519–2523. doi: 10.1007/s10853-005-1985-910.1007/s10853-005-1985-9 ↗
46. Molina JM, Arpon R, Saravanan RA, Garcia-Cordovilla C, Louis E, Narciso J (2004) Threshold pressure for infiltration and particle specific surface area of particle compacts with bimodal particle distributions. Scr Mater 51:623–627. doi: 10.1016/j.scriptamat.2004.05.00910.1016/j.scriptamat.2004.05.009 ↗
47. Kida M, Bahraini M, Molina JM, Weber L, Mortensen A (2008) High-temperature wettability of aluminum nitride during liquid metal infiltration. Mater Sci Eng A 495:197–202. doi: 10.1016/j.msea.2007.12.05010.1016/j.msea.2007.12.050 ↗
48. Krüger C, Mortensen A (2012) Al2O3 particle rounding in molten copper and Cu8 wt%Al. J Mater Sci 47:6346–6353. doi: 10.1007/s10853-012-6559-z10.1007/s10853-012-6559-z ↗
49. Mortensen A, Cornie JA (1987) On the infiltration of metal matrix composites. Metall Trans A 18:1160–1163. doi: 10.1007/BF0266857010.1007/BF02668570 ↗
50. Michaud V, Mortensen A (2007) On measuring wettability in infiltration processing. Scr Mater 56:859–862. doi: 10.1016/j.scriptamat.2007.02.00210.1016/j.scriptamat.2007.02.002 ↗
51. Michaud V, Mortensen A (2012) Corrigendum to: “On measuring wettability in infiltration processing” [Scripta Mater 56 (2007) 859-862]. Scr Mater 67:519–520. doi: 10.1016/j.scriptamat.2012.06.00110.1016/j.scriptamat.2012.06.001 ↗
52. Molina JM, Rodriguez-Guerrero A, Bahraini M et al (2007) Infiltration of graphite preforms with Al–Si eutectic alloy and mercury. Scr Mater 56:991–994. doi: 10.1016/j.scriptamat.2007.01.04210.1016/j.scriptamat.2007.01.042 ↗
53. Bahraini M, Molina JM, Weber L, Mortensen A (2008) Direct measurement of drainage curves in infiltration of SiC particle preforms. Mater Sci Eng A 495:203–207. doi: 10.1016/j.msea.2008.01.07410.1016/j.msea.2008.01.074 ↗
54. Mortensen A, Wong T (1990) Infiltration of fibrous preforms by a pure metal: Part III. Capill phenom Metall Trans A 21A:2257–2263. doi: 10.1007/BF0264788810.1007/BF02647888 ↗
55. Oya M, Takashi M, Iwata Y et al (2002) Mercury determines pore-size distribution intrusion porosimetry. Am Ceram Soc Bull 81:52–56
56. León y León CA (1998) New perspectives in mercury porosimetry. Adv Colloid Interfac 76–77:341–372. doi: 10.1016/S0001-8686(98)00052-910.1016/S0001-8686(98)00052-9 ↗
57. Keene BJ (1993) Review of data for the surface tension of pure metals. Inter Mater Rev 38:157–192. doi: 10.1179/imr.1993.38.4.15710.1179/imr.1993.38.4.157 ↗