journal article·2005-04

Rate-dependent indentation behavior of solder alloys

Feng-Jiang Wang, Xin Ma, Yi-Yu Qian

Journal of Materials Science· Volume 40· Issue 8
Publisher page

Abstract

Finite element (FE) simulations of visco-plastic indentation in Sn-37Pb eutectic solder alloy are performed to investigate the influence of loading rate on its creep characteristic. The resulting indentation load-displacement curves are rate-dependent and have varying creep penetration depths during the same hold time. Creep indentation hardness H, defined from the concept of “work of indentation”, varies with volume strain occurring during the creep hold time, which is a measure of creep strain rate $$\dot \varepsilon$$ cr. Thus, creep stress sensitivity can be determined from the H versus $$\dot \varepsilon$$ cr curve. This analysis can be verified by the good agreement between the derived value and the predefined value, and then be used to analyze the Berkovich indentation load-displacement curves of Sn-3.5Ag-0.75Cu lead-free solder. Such indentation tests and physical analysis provide a cheaper and more convenient method to determine the mechanical properties of the upcoming lead-free solder alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. J. GLAZER, Intern. Mater. Rev. 40 (1995) 65.10.1179/095066095790151115 ↗
2. M. ABTEW and G. SELVADURAY, Mater. Sci. Eng. Reports 27 (2000) 95.10.1016/S0927-796X(00)00010-3 ↗
3. K. SUGANUMA, Curr. Opin. Solid State Mater. Sci. 5 (2001) 55.10.1016/S1359-0286(00)00036-X ↗
4. M. FUJIWARA and M. OTSUKA, Mater. Sci. Eng. A 319?321 (2001) 929.10.1016/S0921-5093(01)01079-6 ↗
5. C.-M. CHENG and Y.-T. CHENG, Appl. Phys. Lett. 71 (1997) 2623.10.1063/1.120159 ↗
6. A. E. GIANNAKOPOULOS and S. SURESH, Scripta Mater. 40 (1999) 1191.10.1016/S1359-6462(99)00011-1 ↗
7. M. SAKAI, J. Mater. Res. 14 (1999) 3630.10.1557/JMR.1999.0490 ↗
8. K. ZENG and C.-H. CHIU, Acta Mater. 49 (2001) 3539.10.1016/S1359-6454(01)00245-2 ↗
9. P.-L. LARSSON, Int. J. Mech. Sci. 43 (2001) 895.10.1016/S0020-7403(00)00056-4 ↗
10. J. H. LAU (eds.), ?Solder Joint Reliability: Theory and Application? (Von Nostrand Reinhold, New York, 1992).
11. W. J. PLUMBRIDGE, J. Mater. Sci. 31 (1996) 2501.10.1007/BF00687275 ↗
12. R. DARVEAUX and K. BANERJI, IEEE Trans. CHMT. 15 (1992) 1013.
13. X.-Q. SHI, Z.-P. WANG, et al., ASME J. Electron. Packag. 124 (2002) 85.10.1115/1.1462624 ↗
14. Y. WEI, C.-L. CHOW, H.-E. FANG and M.-K. NEILSEN, ibid. 123 (2001) 278.10.1115/1.1372319 ↗
15. A. DESHPANDE, G. SUBBARAYAN and D. ROSE, ibid. 122 (2002) 6.10.1115/1.483125 ↗
16. W. C. OLIVER and G. M. PHARR, J. Mater. Res. 7 (1992) 1564.10.1557/JMR.1992.1564 ↗
17. T.-A. VENKATESH, K.-J. VAN VLIET, A.-E. GIANNAKOPOULOS and S. SURESH, Scripta Mater. 42 (2000) 833.10.1016/S1359-6462(00)00311-0 ↗
18. N.-A. STILWELL and D. TABOR, Proc. Phys. Soc. 78 (1961) 169.10.1088/0370-1328/78/2/302 ↗
19. J.-R. TUCK, A.-M. KORSUNSKY, S. J. BULL and R. I. DAVIDSON, Surf. Coat. Technol. 137 (2001) 217.10.1016/S0257-8972(00)01063-X ↗
20. K.-L. JOHNSON, J. Mech. Phys. Solids 18 (1970) 115.10.1016/0022-5096(70)90029-3 ↗
21. D. TABOR, ?Hardness of Metals,? (Oxford University Press, London, 1951).
22. M. MATA, M. ANGLADA and J. ALCAL�, J. Mater. Res. 17 (2002) 964.10.1557/JMR.2002.0144 ↗
23. B. P. RICHARDS et al., ?An Analysis of the Current Status of Lsead-free Soldering,? NPL and ITRI Report (1999).
24. S. WIESE, E. MEUSEL and K.-J. WOLTER, 53rd ECTC 2003, p. 197.